Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Palm Beach Gardens
A new driveway gate in Palm Beach Gardens typically runs $3,800 to $12,600 installed, depending on material, width, and whether automation is included. Most installations we schedule are quoted with a written price before any work starts, and we handle the job from post footing to final opener programming. If you’re planning a gate for a property off PGA Boulevard or near the Intracoastal, call (469) 530-2485 and we’ll give you a number that won’t move at the door.
We work throughout Palm Beach Gardens, from the golf communities around Mirasol and BallenIsles to the older neighborhoods west of Military Trail. The city’s mix of canal-front estate properties, gated HOA communities, and mid-century homes means we see every gate configuration you can imagine. Salt air does real damage here, something we’ll explain below, because it changes what hardware actually makes sense to install.
Why Carver Gate Repair Is Palm Beach Gardens’s Preferred Gate Installation Company
Our crews know what fails on Palm Beach Gardens properties because we’ve been called out to fix those failures for years. The Garrison Standard drives how we operate: written prices, background-checked and uniformed technicians, and a 365-Day Done Right Promise on every repair. A gate installation isn’t just about hanging steel. It’s about making sure the post, the hinges, and the operator will still be working in five or ten years, with the Atlantic a few miles east.
Every job we do in Palm Beach Gardens gets a written price before any work starts. That’s non-negotiable. The number doesn’t grow once the post hole is dug or the old gate comes off its hinges. Our technicians are background-checked, wear uniforms, and leave a clean site when the job’s done. That matters when you’re letting someone through your gate and onto your property.
Maybe the part our Palm Beach Gardens customers mention most is the phone. Call (469) 530-2485 at 2 a.m. on a Sunday and a live person answers. No voicemail tree, no “we’ll call you Monday.” For homeowners who’ve been burned by no-shows and moving quotes, that’s the difference between trusting a company and taking a chance.
Gate Opener Installation in Palm Beach Gardens
Gate Opener Installation in Palm Beach Gardens is one of the most common jobs we do, and it’s where salt air causes the most avoidable failures. A gate opener install here typically runs $1,600 to $4,800, including the operator, wiring, safety photocells, and programming. The job involves mounting the operator arm or slide track, running power from your panel to the gate, wiring in keypads and remotes, and setting the open and close limits so the gate never slams or hangs up.
Coastal-Sealed Operator Boards
The circuit board inside a gate operator is the most vulnerable component on your property line. Salt fog from the Intracoastal works its way into unsealed enclosures and corrodes boards, connectors, and limit switches within two or three seasons. We install operators with sealed enclosures and, on canal-front properties, add a silicone-beaded gasket around the board access panel. This is baseline work in Palm Beach Gardens, not an upsell.
Swing vs. Slide Operators
Most single-family driveways in Palm Beach Gardens use swing gate operators, because the properties have enough setback for an articulating arm. Slide operators are more common on commercial properties or estates with long driveway runs and shallow setbacks off PGA Boulevard. Both need properly sized arms, correct torque settings, and a battery backup if you want the gate to open during a storm outage. We stock operators and parts for Viking, DoorKing, FAAC, and Elite systems.
Gate Fabrication in Palm Beach Gardens
Gate Fabrication in Palm Beach Gardens almost always starts with the same conversation: painted steel or galvanized steel. A custom fabricated driveway gate here runs $4,500 to $14,000 depending on length, height, design, and whether we’re building a double swing or a single slide. The fabrication process involves cutting and welding the frame, adding pickets or panels, preparing the surface, and then either powder-coating painted steel or hot-dip galvanizing for coastal exposure.
Hot-Dip Galvanized Frames
For any property east of Military Trail, we strongly recommend hot-dip galvanized frames rather than basic painted steel. Galvanizing dips the entire welded frame into molten zinc, sealing every seam and corner against moisture. Painted steel will start showing rust at welds and hinge points within four to six years this close to the Intracoastal. A galvanized frame with stainless hinge hardware should go well beyond a decade, even on canal-front lots where the salt fog is heaviest.
Pedestrian and Double Gates
A pedestrian gate alongside a driveway gate is a standard part of many Palm Beach Gardens installations, letting you walk in and out without cycling the full driveway gate. Double gates are common on the wider driveways we see in communities like BallenIsles and Mirasol. On a double swing gate, each leaf needs its own hinge set, and the operator needs to be sized for the combined weight so one motor isn’t dragging both panels.
Trusted Brands We Service in Palm Beach Gardens
Our technicians are trained on nine gate-motor brands, and we keep common parts for Viking, Ghost Controls, and DoorKing on our trucks when we dispatch to Palm Beach Gardens. That means a board swap, a limit switch replacement, or a new remote programming session often happens same-visit rather than waiting on a part shipment. If your existing gate already has an Elite or FAAC operator, we’ll work with it rather than pushing a replacement you don’t need. The right part matched to the system already installed is faster and cheaper than a full swap, and it respects the equipment you already own.
Common Gate Installation Problems We See in Palm Beach Gardens Homes
- Rusted hinge posts on painted-steel gates. A gate that’s sagging or dragging at the latch side usually traces back to a hinge post that’s rusted through below ground level. Replacing the post is the only fix; welding a patch onto corroded steel just buys a few months, especially east of Military Trail.
- Operator boards corroded by salt fog. We’ve replaced boards on gates within two years of original install because the enclosure wasn’t sealed and the salt air did the rest. A sealed enclosure rated for coastal humidity is the difference between a long-lived install and a repeat service call.
- Solar openers on shaded lots. Some Palm Beach Gardens properties have mature oaks and palm canopies that shade solar panels, leaving swing gates dead after a few cloudy days. We often retrofit a low-voltage AC run from the house, which is more reliable than chasing sun on a heavily treed lot.
- Undersized operators on heavy double gates. A standard residential swing operator can’t handle a 16-foot double gate made of solid pickets. When the motor burns out, the fix is usually a heavier operator matched to the gate’s actual weight, not another unit of the same undersized model.
Pricing for Gate Installation in Palm Beach Gardens, FL
Here are the numbers, straight. A basic single swing gate in galvanized steel with no automation runs $3,600 to $6,800. Add a quality swing operator with photocells and keypad entry, and you’re at $5,800 to $9,600. A double swing gate with automation typically runs $7,200 to $12,600. Slide gates start around $6,500 and go up from there based on track length and motor duty cycle. Coastal-grade galvanizing adds roughly $800 to $1,400 over painted steel, and on an east-side Palm Beach Gardens property it’s the best money you’ll spend on that install.
Call (469) 530-2485 for a written estimate. We come out, measure, specify the hardware, and hand you a price before any work begins. If you approve it, that’s the price you pay. Nothing changes at the door.
We Also Serve Cities Near Palm Beach Gardens
We serve Palm Beach Gardens and the surrounding communities, including North Palm Beach, Jupiter, West Palm Beach, and Palm Beach. If your property is in any of those areas, the same coastal-grade specifications and written pricing apply. For more on what we do, see our Gate Installation service details and our Palm Beach Gardens coverage information.
Serving Palm Beach Gardens, FL – Our Local Coverage Area
We’re based in the Palm Beach Gardens area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Palm Beach Gardens
Because salt-laden air from the Atlantic travels inland on daily sea breezes, settling on painted-steel hinges, welds, and operator boards. Properties east of Military Trail, especially those near the Intracoastal, get a daily salt deposit that inland homes never see. That salt accelerates corrosion at every exposed joint, which is why galvanized posts and stainless fasteners are standard practice for any coastal install. Call (469) 530-2485 if you’re seeing rust at your hinge points; we’ll tell you honestly whether the post can be saved or needs replacement.
Hot-dip galvanized steel with stainless steel hinges and fasteners. Galvanizing coats every weld, seam, and corner in zinc, which sacrifices itself before the steel corrodes. Powder-coated aluminum is another solid choice for coastal Palm Beach Gardens because it won’t rust at all, though it carries a higher material cost. Painted steel is the budget option upfront, and it’s the one we replace most often five to seven years later.
Sometimes, if the post is still structurally sound and the sag comes from a worn hinge or a loose bracket. But in our experience on Palm Beach Gardens coastal properties, sagging usually means the post has rusted through at ground level where salt water and sprinkler runoff collect. Replacing the post is the honest fix; anything less is a temporary patch. We’ll diagnose it on site and show you exactly what we’re seeing before any work is approved.
Yes. We install operators from Viking, DoorKing, FAAC, Elite, and Ghost Controls, matched to your gate’s weight and your property’s exposure. For Palm Beach Gardens homes east of Military Trail, we use sealed enclosures and, on canal-front lots, add an extra gasket around the board access panel. The operator board is the first thing salt fog kills, so sealing it properly at install is the difference between a five-year operator and a fifteen-year one.
Under Florida code, an automatic gate needs a safety system that will stop and reverse the gate if a person or vehicle is in the path. Photocells, also called photo eyes or safety beams, are the standard way to do that. We wire them on every automated install we do in Palm Beach Gardens, set to detect any obstruction across the gate’s travel path. Call (469) 530-2485 and we’ll walk you through what your gate needs to be safe and code-compliant.
Call Carver Gate Repair for Gate Installation in Palm Beach Gardens
When you’re ready to install a gate that will outlast the salt air, call (469) 530-2485. We’ll answer in person, schedule a measure, and hand you a written price before any work starts. The technicians who show up will be background-checked, uniformed, and working to The Garrison Standard. Lonnie Burke leads our crew, and the standard he holds is simple: written prices, correct work, and a site left clean. If it’s not done right, we make it right. That’s the 365-Day Done Right Promise, and it’s in writing on every job.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Palm Beach Gardens and the surrounding coastal communities.