Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Federal Way, WA
Carver Gate Repair handles gate repair, gate installation, and gate motor repair for homeowners across Federal Way, WA. Most of our work here involves steel and aluminum driveway gates on hillside properties, where a gate that will not open means a vehicle trapped at the bottom of a slope. If your gate is sagging, stuck, or has stopped responding to the remote, call us at (469) 530-2485 and a live person answers, any hour of any day.
Why Federal Way Homes Are Different
Federal Way sits on a series of ridges and draws between Puget Sound and the Green River Valley, which means a lot of driveways are sloped and a lot of gates are working hard every cycle just holding their position. We see more hinge wear and more operator strain on hillside lots in Twin Lakes and Lakota than we do on flat ground. When a gate starts dragging or the motor begins groaning, the slope is usually part of the story.
The climate matters too. Federal Way gets steady rain from October through May, sometimes more than 40 inches in a year, and that moisture works its way into control boards, keypads, and the low-voltage wiring at the gate posts. Corrosion on limit switches and photo-eye connections is routine out here. We weather-seal every connection we touch and we check the weep points on motor housings as standard practice, not as an add-on.
Housing stock drives the work as well. Much of Federal Way was built between the 1960s and the 1990s, and many of those properties have original fence and gate posts that were never sleeved or set as deep as today’s code wants. We routinely find posts that have shifted or rusted at ground level. The good news is that most homeowners associations here, including communities around Steel Lake and the campus-adjacent neighborhoods, allow gate work without a permit so long as the footprint does not change.
Our Main Federal Way Services
The two calls we take most often from Federal Way homeowners are a gate that has stopped opening and a motor that runs but will not move the gate. Each of those jobs has its own page here so you can get the full detail without wading through anything else.
Gate Repair in Federal Way
Repair work in Federal Way usually starts with a walkaround: checking the hinge posts, the hinge barrels, the gate’s weight distribution, and the point where the operator arm meets the gate leaf. Sloped driveways put a constant load on the top hinge, and we replace more top-hinge barrels in this city than anywhere else we work. If the gate still opens and closes but scrapes, wobbles, or slams, that is a good candidate for a same-visit fix. If the leaf has dropped enough that the latch no longer lines up, we re-hang before the hardware takes more damage. Full details are on the Gate Repair in Federal Way page.
Gate Installation in Federal Way
A new gate in Federal Way means choosing steel or aluminum, matching the existing fence line, and setting posts deep enough to hold up on a slope. We measure on site, write up a price, and handle the whole install from concrete to final swing test. Driveway grade matters here more than most cities; a gate hung level on a sloping drive is the difference between a quiet year and a gate that drags within six months. We account for that in the post set and the hinge selection. See Gate Installation in Federal Way for the full scope and process.
Gate Motor Repair in Federal Way
Motors in Federal Way work in rain, and the ones that fail are usually the ones whose installer left a control board exposed or skipped the conduit on a low-voltage run. We diagnose the whole chain: the arm, the limit switches, the loop detector if you have one, and the board itself. If a board has failed, we replace it and then seal the enclosure so the next one does not die the same way. When the operator is beyond repair, we quote a replacement on the spot. Details on brands and diagnosis are on the Gate Motor Repair in Federal Way page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Federal Way
We work on Viking, Ghost Controls, DoorKing, and Elite operators, among others, and our technicians arrive with the most common boards, arms, and limit switches already on the truck. That means most single-operator repairs in Federal Way are finished in one visit. The full list is at our brands.
Pricing for Gate Company in Federal Way, WA
| Service | Typical range in Federal Way |
|---|---|
| Gate repair, general service call | $95 – $190 |
| Hinge replacement (per hinge) | $40 – $90 |
| Welding repair (cracked or broken gate frame) | $150 – $450 |
| Gate sag / alignment correction | $150 – $350 |
| Gate opener / motor repair | $120 – $480 |
| Gate opener installation (labor only) | $350 – $850 |
| Control board replacement | $180 – $520 |
| Keypad or intercom installation | $220 – $520 |
| Full gate installation (standard single driveway, materials included) | $1,800 – $4,900 |
| New motor with installation, full replacement | $1,200 – $2,900 |
What pushes a Federal Way job toward the upper end is usually slope and access. A gate at the bottom of a steep driveway on a narrow lot takes longer to work on, and replacing posts in wet clay costs more than a straightforward hinge swap. Whatever the number, you get it in writing before any work starts, and that written price is the price you pay.
Neighborhoods We Serve in Federal Way
We run calls across Federal Way, from the older lots near Steel Lake up through Twin Lakes, Lakota, and the neighborhoods east of Pacific Highway South.
- Twin Lakes
- Lakota
- Steel Lake
- Mirror Lake
- Adelaide
Most Federal Way neighborhoods are within a 20 to 35 minute dispatch for us, and emergency calls are answered by a live person around the clock, including weekends and holidays.
Service Area – Cities Near Federal Way
We also take gate work in the cities around Federal Way. If you are just over the county line or a few exits down, reach out and we will confirm coverage. We serve Pacific, WA, Milton, WA, Kent, WA, and Auburn, CA on a regular basis.
Serving Federal Way, WA – Our Local Coverage Area
We’re based in the Federal Way area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Federal Way
Most Federal Way calls are reached within 35 minutes. Emergency calls go through a live person 24/7, not a voicemail box. We give you a window before the technician heads your way and we keep it.
In most cases, no. Replacing an existing gate on the same footprint is treated as maintenance by most Federal Way HOAs and the city. If you are changing the width, adding a pedestrian gate, or moving posts, we will confirm requirements before we start.
Every repair carries the 365-Day Done Right Promise: a written guarantee good for a full year from the date of service. If the same repair fails inside that year, the second visit is free, no charge and no argument. That is The Garrison Standard on every job we run in Federal Way.
For a free estimate on any gate work in Federal Way, call (469) 530-2485. The price you are quoted is the price on the invoice, in writing, before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Federal Way Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.