Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Sunrise, FL
Gate repair in Sunrise, FL runs into two repeat problems: salt-driven corrosion on metal components and storm-season power interruptions that stress motor boards. Most Sunrise homes with gates sit in planned subdivisions built from the 1970s through the early 2000s, which means we see a mix of aging swing operators and newer slide systems, often with original wiring. We answer our phone live around the clock at (469) 530-2485, and every repair starts with a written price before any work begins.
Why Sunrise Homes Are Different
Sunrise sits a few miles from the Everglades and close enough to the coast that airborne salt is a real factor. Gate hinges, track rollers, and control board contacts corrode faster here than inland. We replace more rusted limit switch housings and pitted hinge brackets in Sunrise than in drier parts of South Florida, and the fix usually means upgraded stainless hardware rather than another zinc-coated part that fails in two years.
Storm season is the second driver of Sunrise gate work. Surge damage to motor boards is common after lightning-heavy afternoons, and many homes in Welleby, Springtree, and Sawgrass Mills-adjacent communities have gates that double as the primary pedestrian entry when garage doors stay closed. When a swing operator loses its board, the gate stays locked in place, and that is a call we treat with priority. HOA communities like the ones north of Oakland Park Boulevard also keep us busy with compliance-driven repairs: a gate that will not close completely is a violation waiting on a notice.
Our Main Sunrise Services
Gate repair and gate motor repair are the two calls Sunrise homeowners make most often. Installation is the third, typically when a home changes hands or an old slide gate finally wears past repair.
Gate Repair in Sunrise
Most Sunrise repair calls start with a gate that has drifted out of alignment, a hinge that has sagged, or a wheel that has chewed through the track. Salt corrosion accelerates all three. We inspect the full gate path, not just the visible failure, because a dragging wheel today means a burned-out motor in six months. Repairs include welding, hinge replacement, track straightening, and limit switch adjustment on the opener side. Full details, including Sunrise price ranges, are on the Gate Repair in Sunrise page. Every job gets a written price before we start, and the repair itself carries a full-year guarantee in writing.
Gate Installation in Sunrise
New gate installation in Sunrise means planning for wind load, drainage, and HOA finish requirements before concrete is ever poured. We work with both fabricated steel and aluminum gates, and we size the operator to the gate weight, not the other way around. A full installation typically includes the gate, posts, operator, safety edges or photo eyes, and the power run. The Gate Installation in Sunrise page covers what the process looks like from measure to final walk-through. We provide a written quote after a free on-site measure, so the number does not move once work is scheduled.
Gate Motor Repair in Sunrise
Sunrise gate motors live outside in heat, humidity, and salt air, which shortens the life of control boards and capacitors. We diagnose operator failures by testing the board, limit switches, and gear assembly rather than swapping parts on a guess. Common Sunrise repairs include circuit board replacement, capacitor failure, stripped drive gears, and sensor or loop detector faults. The Gate Motor Repair in Sunrise page lists exact repair ranges by motor type. We work on operators matched to the brand already in the ground, so the replacement fits the existing mount and wiring.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sunrise
We carry parts and service knowledge for FAAC, BFT, Linear, and Viking operators common across Sunrise, plus five other major brands. We keep the most-replaced boards and safety sensors stocked in our South Florida dispatch office, so most Sunrise motor repairs do not wait on a shipped part. See the full list on our brands page.
Pricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate service call and diagnostic | $95 – $165 |
| Hinge replacement (heavy swing gate) | $240 – $500 |
| Gate wheel or roller replacement | $175 – $350 |
| Track repair or straightening | $200 – $475 |
| Weld repair on steel gate frame | $180 – $420 |
| Slide gate limiter or limit switch replacement | $220 – $360 |
| Gate opener circuit board replacement | $350 – $800 |
| Capacitor replacement | $150 – $300 |
| Full operator replacement (slide or swing) | $1,200 – $3,500 |
| Gate safety sensor or photo eye replacement | $200 – $400 |
Salt-corroded hardware and HOA repair deadlines are the two factors that push Sunrise jobs toward the upper end of these ranges. Regardless of where a job lands, the price is written down and agreed before our technician touches the gate. That number does not change at the door, and every repair is covered in writing for a full year.
Neighborhoods We Serve in Sunrise
Our technicians cover Sunrise end to end. Most calls come from the established single-family communities and the gated sections around the Sawgrass corridor, where a mix of original equipment and newer retrofits keeps repair work steady.
- Welleby
- Springtree
- Sawgrass Mills area
- Sunrise Lakes
- New River Estates
Response in Sunrise is typically same-day for repair calls placed before early afternoon, with next-morning scheduling for work requiring parts we do not already have on the truck.
Service Area – Cities Near Sunrise
We serve Sunrise from our South Florida dispatch office, and the same Garrison Standard applies across the state. That means the same written-price rule, the same background-checked technicians, and the same 365-day repair guarantee whether the job is here or in a neighboring metro. We also handle gate work in Miami, FL, Tampa, FL, Orlando, FL, and Jacksonville, FL.
Serving Sunrise, FL – Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most Sunrise repair calls are reached same day when placed before early afternoon. Emergency gate failures, like a gate stuck open at night, are dispatched around the clock. Call (469) 530-2485 and a person answers, including weekends and holidays.
It depends on your community’s covenants. Many Sunrise HOAs require finish and style approval for full gate replacement but not for repair using matching parts. We can work with your HOA’s submitted spec, and we do not start installation work until written approval is in hand if your community requires it.
We cover Sunrise in full, from west of Sawgrass Mills to the communities east of University Drive, including Sunrise Lakes, Welleby, and Springtree. Our dispatch runs from the South Florida office, and scheduling follows the same process every day: a live answer, a written price, and a technician who arrives with the gate history in hand.
Call (469) 530-2485 for a free estimate on any gate repair, installation, or motor work in Sunrise. A live person answers, and the price is in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.