Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Schertz
Gate installation in Schertz runs $2,400 – $7,800 for a standard automatic driveway gate, depending on whether you need a sliding or swing design, power run, and intercom or keypad entry. A proper install takes 2 – 4 days from footing dig to final safety testing, not an afternoon. That is the honest answer, and it’s the same one we give homeowners off FM 1518, along Wiederstein Road, and across the Cibolo Creek neighborhoods. If your gate post was poured shallow into Schertz clay, it’s already moving. Call (469) 530-2485 and we’ll come measure, write the price, and build it so it stays square through wet and dry seasons alike.
Why Carver Gate Repair Is Schertz’s Preferred Gate Installation Company
Schertz homeowners tend to ask the same three questions before anyone digs a hole: who is showing up, what does it cost in writing, and what happens if it fails next spring. We answer all three the same way every time. Every technician who arrives at a Schertz property is background-checked and uniformed, dispatched from our San Antonio coordination office. Every job gets a written price before work starts, not a verbal ballpark that grows once the posts are out of the ground. And every installation carries a written guarantee good for a full year, with a free second visit if anything in that window fails.
We focus on gates and gate motors full time, across nine major brands including Viking, Ghost Controls, and DoorKing. That focus matters in Schertz, where the soil transitions dramatically across the Balcones Escarpment and a generic fencing contractor’s shallow post pour will not survive two wet-dry cycles. Lonnie Burke runs the crew. The Garrison Standard is the process we work to: written prices, clean sites, and a gate that cycles correctly the day we leave and the day you call back, if you ever need to.
Automatic Gate Installation in Schertz
Automatic Gate Installation in Schertz means more than bolting an opener to an existing gate and calling it done. It means sizing the operator to the gate’s actual weight and travel, pouring a footing that will not heave in Schertz’s expansive clay, running power and low-voltage control lines in conduit, mounting safety photocells and edges, and testing the reversal function under load. A Schertz homeowner needs this when the gate is manual and they’re tired of getting out of the truck in August, or when a new build on a corner lot needs secure vehicle access without sacrificing the front yard.
Expect $2,800 – $6,400 for a single automatic swing gate with one operator, keypad, and basic safety set. Automatic slide gates on longer driveway spans, common on Schertz acreage and the larger lots east of I-35, run $3,900 – $7,800 because the operator, rack, and steel track add real material and labor.
Operator and Safety System
The operator is only half the job. Schertz installs get a properly rated motor matched to gate weight, plus a UL 325 compliant photocell set aimed across the full swing or slide path. We test reversal pressure with a physical obstruction before we leave, because a gate that reverses on empty air but not on a child’s bike is a liability, not a convenience.
Power and Control Runs
For gates set back from the house or on lots where power does not reach the gate line, we run conduit and wire from the nearest source, including low-voltage runs for keypads, intercoms, and vehicle loop detectors. Schertz has plenty of long-driveway lots where this is the difference between a working gate and a manual gate with a decorative motor on it.
Gate Installation Services in Schertz
Gate Installation Services in Schertz cover the full structure, not just the automation. We set posts, build the gate frame, hang and level it, mount hardware, install the operator, land the electrical, and run the safety tests. Schertz homeowners call for this when a wooden gate has rotted at the hinge line, when a welded steel gate has sagged beyond adjustment, or when a new home needs a gate where none existed.
A standard single swing gate with new posts, hardware, and a manual latch runs $1,800 – $3,500. A double driveway gate, which Schertz properties with wider access points often require, runs $3,200 – $6,800 including both leafs, drop rods, and center stops. Pedestrian gates alongside the driveway run $800 – $1,600 for a welded steel frame with latch and closer.
Post Footings for Schertz Soil
This is the part most installers skip and Schertz soil punishes. We dig bell-bottomed footings below the active clay zone and set posts in concrete that bears on stable subgrade. A shallow, straight-sided pour will move. We’ve pulled enough of them out of the ground in Schertz to know exactly how they fail.
Gates That Match the House
We install steel, aluminum, and steel-framed wood gates, matched to the existing fence line or the home’s facade. On Schertz streets with deed restrictions or HOA specs, we match the material and finish the community requires, and we do it without turning the front yard into a construction pit for a week.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Schertz
We install and service gate operators from Viking, Ghost Controls, and DoorKing, among others, and we stock common boards, limit switches, remote kits, and safety edges for those systems locally so Schertz customers are not waiting on a part from a warehouse three states away. A Viking swing arm on a wrought-iron gate off Borgfeld Road gets the same brand-matched install as a DoorKing slide operator on a long driveway in the Cibolo Creek area. The operator brand matters less than matching it to the gate’s weight and use frequency, but when it is time to replace a board or reprogram a remote, having the right brand knowledge beats a generic guess every time.
Common Gate Installation Problems We See in Schertz Homes
- Shallow hinge post footings in expansive clay. Schertz sits where clay over limestone dominates, so a post poured 18 inches deep will heave within a year and the gate will drag or bind. We dig deeper and bell the bottom so the post stays put.
- Mis-aimed safety photocells on new automatic gates. A beam set too low or angled slightly off will trip constantly, or worse, fail to detect an obstacle. We aim and test the beam across the entire swing arc as part of every install.
- Undersized operators on heavy slide gates. A motor rated for a 300-pound gate will burn out in a year on a 600-pound steel slider. We weigh the gate, not the brochure, and size the operator for the actual load.
- Reverse cycles and mid-swing stops. This usually traces back to a limit switch out of adjustment, a dragging wheel, or a binding hinge, not a bad board. We find the mechanical fault first, then program the operator to match the corrected travel.
Pricing for Gate Installation in Schertz, TX
Here is the straight math for Schertz. A single manual swing gate with new posts and hardware runs $1,800 – $3,500. A single automatic swing gate runs $2,800 – $6,400 including operator, keypad, and safety set. A double automatic gate runs $3,900 – $7,200. A sliding driveway gate runs $3,900 – $7,800. Every figure is a written price agreed before we start work, not an estimate that grows at the door. The biggest cost variables in Schertz are gate width, operator size, and whether power already reaches the gate line. Free estimates are exactly that: free. Call (469) 530-2485 and get the number in writing.
We Also Serve Cities Near Schertz
Our crews work throughout the Schertz area and handle Gate Installation in nearby Universal City, Cibolo, Converse, and New Braunfels. If you are just outside the city line, call (469) 530-2485 and we will confirm coverage and schedule a measure. We know the soils and lot patterns across this stretch of the I-35 corridor, and the same written-price and guarantee standards apply in every city we serve.
For a full look at what we do across the region, start with our Gate Installation in Schertz service page.
Serving Schertz, TX – Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Schertz
A standard automatic gate installation in Schertz takes 2 – 4 days from footing excavation to final safety testing, assuming power is already available near the gate line. Day one is dig, form, and pour footings; concrete needs a day to cure before we hang the gate and mount the operator; day three and four are electrical, controls, safety testing, and cleanup. We will tell you the exact schedule for your lot before we start, and we do not promise same-day turnarounds on installations. Call (469) 530-2485 for a specific timeline.
A proper gate installation includes deep, bell-bottomed post footings suited to Schertz’s clay soil, a gate frame sized and hung square, hardware that does not bind, a correctly rated operator, conduit and wiring from the power source, safety photocells and edges, and full reversal testing under load. If any of those steps is skipped, the gate works for a few months and then fails. Our written quote itemizes each one, and the price does not move after you sign it.
Yes. We run conduit and low-voltage control wiring from the nearest source, including long runs on Schertz acreage and larger lots where the gate sits a hundred feet or more from the house. We also install solar-capable operator systems where trenching is impractical, though a hardwired power supply is always the more reliable option when it is available. Call (469) 530-2485 and we will assess the distance and the load before quoting a number.
We install Viking, Ghost Controls, DoorKing, and six other major gate-motor brands, and we match the operator to the gate’s weight and cycle frequency rather than pushing whatever is on the truck. For Schertz homeowners with an existing system, we can usually rebuild or replace the operator using the same brand to keep remotes, keypads, and loop detectors compatible.
A gate that reverses or stops mid-swing usually has a mechanical fault: a dragging hinge, a binding wheel, a limit switch out of adjustment, or a post that has settled and thrown the level off. The safety system is doing its job by stopping the gate, but the correction is mechanical, not electrical. We find and fix the underlying fault, then re-test the full travel and reversal function. Call (469) 530-2485 and we will get it cycling clean again.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving the Schertz area to The Garrison Standard.