Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Spokane
A new gate installation in Spokane typically runs $3,800 to $9,400 for a single drive gate with an opener, and $2,400 to $5,200 for a pedestrian gate without automation. Most installations take one to three days from digging the first post hole to final safety testing. We are Carver Gate Repair, and we have been installing and servicing gates since 2008 as part of the Garrison Partners family. If you are planning a gate in the South Hill, Shadle, or the North Side, call us at (469) 530-2485 and we’ll walk you through what the job actually involves, in plain terms, before you spend a dollar.
Spokane is not a market where a gate installer can get away with guessing. Our crews work locally here, and we know the ground conditions, the neighborhood access patterns, and what a gate has to survive through a full freeze-thaw season. That local knowledge is why our Gate Installation estimates are based on what actually happens in the ground in this city, not what works in a mild-climate market.
Why Carver Gate Repair Is Spokane’s Preferred Gate Installation Company
We run a disciplined operation. Every technician arrives background-checked and in uniform. Every customer gets a written price before any work starts, and that number does not move at the door. That is The Garrison Standard, and it has been the same since 2008 across the entire Garrison Partners family. Spokane homeowners who have been burned by no-show crews and moving quotes tend to notice the difference quickly.
Our reputation in Spokane is built on follow-through. When we schedule an installation, we show up with the right equipment, the right parts, and a plan that accounts for the local ground. Customers in places like Kendall Yards, Lincoln Heights, and Hillyard have called us because a previous installer set posts shallow and the gate was binding by spring. We do not take shortcuts on footings or safety components. A gate can be dangerous if it is set wrong, and we do not put our name on a job that is not right.
Phones are answered by a live person, 24 hours a day, seven days a week, including weekends and holidays. When you call (469) 530-2485, you will speak to a person, not a voicemail tree. Scheduling for Spokane is coordinated from our Seattle office, and a local crew is dispatched directly to your property.
Gate Opener Installation in Spokane
Gate Opener Installation in Spokane means mounting and wiring a motorized operator onto a new or existing gate, and doing it so the system holds up through the freeze-thaw cycles that shift post footings around this region. In Spokane, a proper gate opener installation runs $1,800 to $4,600 depending on whether we are doing a swing arm, a rack and pinion slide operator, or a hydraulic unit. We wire the operator, install the safety sensors, set the limit switches, and test everything under load before we leave.
Swing Arm Operators on Driveway Gates
For dual swing driveway gates in neighborhoods like Manito or Five Mile, an articulating arm operator is the most common choice. The job includes mounting the arm, setting travel limits, running low-voltage power to the operator, and installing photo-eye sensors on both sides of the gate path. We test the reversal pressure with a test block, twice, as UL 325 compliance requires.
Slide Gate Operators and Rack Systems
Spokane has a lot of older homes with narrow driveways where a sliding gate makes more sense than a swing gate. A rack and pinion slide operator runs $2,200 to $5,100 here, and it is not a simple bolt-on. The operator post has to be set deep enough to resist frost heave, the rack has to be spaced evenly along the gate’s full travel, and the loop detector has to be buried at the right depth in the driveway. When those details are wrong, the gate strains, trips out, or stops mid-travel.
Gate Fabrication in Spokane
Gate Fabrication in Spokane is the actual building of the gate itself, from raw steel or aluminum, to the exact width and height of your opening. A custom-fabricated single steel driveway gate here runs $3,200 to $8,900, and a fabricated double gate runs $5,500 to $12,000, depending on steel gauge, panel style, and finish. We build to the measurements we take on-site, not to a catalog guess.
Steel Drive and Alley Gates
In older Spokane neighborhoods like Emerson-Garfield or West Central, back alleys are common, and the alley gate has to handle more abuse than the front gate. We build these with heavier-gauge steel, weld the hinges to the post with full penetration, and add gusset plates at the corners. A gate built for an alley has to take bumps and weather without the frame twisting out of square.
Pedestrian and Walk Gate Fabrication
A pedestrian gate in a fence line on the North Side or in Shadle normally runs $1,800 to $3,800 fabricated and installed. We build these with self-closing hinges when the customer wants them, and we match the steel to the existing fence height. If the walk gate is going to carry an electronic lock or a keypad, we reinforce the stile so the strike plate does not tear out.
Trusted Brands We Service in Spokane
Our technicians in Spokane install and service gate operators from Viking, LiftMaster, Ghost Controls, DoorKing, FAAC, BFT, Linear, and Elite. We keep a stocked van of common parts for these brands, which means fewer trips back and forth and less downtime when we are on a job. If your property already has an operator from one of these names, we can match the new installation to the existing wiring and safety setup rather than forcing you into a different brand. Spokane customers call us about Viking and Ghost Controls more often for residential installs, and DoorKing for commercial lots off Division Street.
Common Gate Installation Problems We See in Spokane Homes
- Frost heave moving the post footing. Spokane’s ground freezes deep, and when water in the soil expands, it pushes against set posts. A post set at 24 inches will shift in a year or two, and we routinely dig to 36 inches or deeper, below the frost line, with a wider concrete collar and anchor bolts.
- Rack and pinion misalignment on slide gates. After a couple of seasons of ground movement, the rack pulls away from the pinion gear, and the operator trips out or strains. We see this often on slide gates along the North Side and in the Valley. The fix is remounting the rack and shimming the operator post back to level, then resetting the limit switches.
- Missing entrapment protection. Many gates we are called to inspect in Spokane were installed without UL 325-required photo-eyes or safety edges. Gate operators without functioning entrapment protection are dangerous, especially around kids. A new installation is not complete without reversal testing under load.
- Sagging gates on old concrete aprons. In neighborhoods like Emerson-Garfield, old concrete aprons have settled unevenly. A gate that clears the apron in July catches it in March. We set the hinge posts with enough clearance and slope accounting for the apron’s settled grade.
Pricing for Gate Installation in Spokane, WA
Here is what a gate installation in Spokane actually costs, based on the work we do in this market. A fabricated single steel driveway gate with a swing opener runs $3,800 to $9,400. A slide gate with a rack and pinion operator runs $5,000 to $11,000. A pedestrian gate runs $1,800 to $3,800. The price depends on steel gauge, gate width, the operator type, and the condition of the ground we are setting posts into. We give a written price before we start, and that is the price you pay. Call us at (469) 530-2485 and we will come out, measure, and give you the number in writing.
| Installation Type | Typical Spokane Cost |
|---|---|
| Single drive gate with swing operator | $3,800 – $9,400 |
| Single drive gate with slide operator | $5,000 – $11,000 |
| Double drive gate with dual operators | $7,500 – $15,000 |
| Pedestrian gate, fabricated and installed | $1,800 – $3,800 |
| Gate opener installation only, existing gate | $1,800 – $4,600 |
We Also Serve Cities Near Spokane
Beyond our work across Spokane, Carver Gate Repair dispatches crews to Airway Heights, Mead, Medical Lake, and Cheney. If your property sits outside the city core, a quick call gets you on the schedule. We service the same brands and hold to the same Garrison Standard everywhere we work.
Serving Spokane, WA – Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Spokane
In Spokane, gate post footings should be dug to 36 to 48 inches deep, below the local frost line, depending on the soil and the weight of the gate. A 24-inch footing will heave in this climate. We also use a wider concrete collar around the base and anchor bolts at the plate. Digging deep costs more in labor and concrete, but it is the difference between a gate that stays square and one that binds every spring. Call (469) 530-2485 and we’ll tell you what your soil and gate size require.
We can, but we will fix the sag first, because an operator mounted to a sagging gate will tear itself apart. In Spokane, sag usually means the hinge post has shifted, and the fix is either resetting the post on a deeper footing or replacing the hinges and realigning the gate. We would not recommend automating a gate that is not hanging square. We will give you a written price for the repair and the operator together before any work begins.
Yes. UL 325 entrapment protection is required on any automated gate we install in Spokane, and we will not complete a job without functioning photo-eyes or edge sensors and a passing reversal test. This is not an upsell, it is a safety requirement. Gaps in the protection can seriously injure a person or damage a vehicle. We test with a test block twice on every automated install.
We install and service Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Linear, and Elite operators in Spokane. That covers most residential systems in this market. If you already have an operator from one of these brands, we can match a new system to the existing wiring and safety layout. Call (469) 530-2485 with the model number and we’ll tell you what your installation involves.
Most single gate installations in Spokane take one to three days. A simple pedestrian gate can sometimes be done in one day. A driveway gate with a new operator, deeper footings, and concrete curing needs more time. We do not rush concrete or skip safety testing to hit a one-day deadline. We will give you a schedule when we give you the written price.
Contact Carver Gate Repair in Spokane
If you need a gate installed, a gate opener fitted to an existing gate, or a sagging gate put right before you automate it, call us at (469) 530-2485. We will get you a free estimate with a written price. The crews serving Spokane work to The Garrison Standard: written prices, background-checked technicians, and a full-year guarantee on repairs called the 365-Day Done Right Promise. Lonnie Burke leads the operation, and the standard does not bend.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Spokane since 2008.