Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Auburn, WA
Gate repair in Auburn means working on homes built across six decades, on lots that slope toward the Green River Valley, in weather that swings from summer dust to winter saturation. We’re the gate company homeowners call when a gate won’t close, a motor hums without moving, or an old wooden gate has finally pulled its hinges out of the post. Each of our three main services has its own dedicated Auburn page, linked below. If you need a gate working again today, call (469) 530-2485 and a live person will answer.
Why Auburn Homes Are Different
Auburn’s housing stock runs the full range: 1950s ramblers in the flatlands around Lea Hill and Lakeland Hills, 1980s and 1990s subdivisions climbing the hillsides south of Highway 18, and newer builds along the ridge toward Scenic Hill. That matters for gate work because post depth, concrete condition, and how a gate hangs change with the age of the property. A gate on a 1960s poured post in the valley floor behaves differently than one on a 2005 block wall up the hill.
The terrain is the other variable. Many Auburn driveways pitch upward from the street, which means swing gates carry their weight on the downhill hinge and slide gates fight grade if the track wasn’t set level in the first place. We measure grade on every Auburn job before quoting, because a gate that looks wrong but measures fine is usually fighting the slope, not the motor. Rainfall here is real – Auburn gets over 40 inches most years – and we see more rotted wood posts, corroded limit switches, and water-logged control boxes than crews in drier parts of the region. Any repair we quote accounts for that moisture load.
Homeowners in the city limits work under Auburn’s municipal code for fence and gate setbacks, and several HOA-governed communities – Lakeland Hills in particular – have their own design and height standards. We’re familiar with both; if your association has a spec sheet, we’ll work to it.
Our Main Auburn Services
Auburn homeowners call us most often for two things: a gate that has stopped moving and a motor that has stopped answering. Here’s how each one works with us.
Gate Repair in Auburn
Most Auburn gate repair calls start with a symptom: the gate drags, the gate slams, the gate won’t latch, or the gate has come off its track entirely. We send a background-checked, uniformed technician who diagnoses the specific failure – a sagging hinge plate, a broken weld on the frame, a bent roller, a post that’s shifted – and hands you a written price before any work starts. On sloping Auburn driveways we pay extra attention to hinge alignment and post plumb; that’s where most repeat failures begin. Gate Repair in Auburn covers the full repair scope, what to expect, and what it typically costs.
Gate Installation in Auburn
A new gate in Auburn is a measured job, not a guess. We check grade, post depth, concrete condition, and how the new gate will swing or slide through a full season of wet ground and dry summers. We quote steel, aluminum, and wood gates against the exact opening – never an off-the-shelf panel forced into a space it doesn’t fit. Every installation includes a written price before we order material, and the work is scheduled once you approve that number. Gate Installation in Auburn walks through options, timelines, and what a full install includes.
Gate Motor Repair in Auburn
When the opener runs but the gate doesn’t move, or the gate moves but won’t stop in the right place, the motor or its controls are usually the problem. Auburn’s wet winters are hard on limit switches, loop detectors, and control boards – we replace more corroded components here than anywhere else in the south King County service area. Our technicians work on Linear, Viking, Ghost Controls, and DoorKing equipment among the brands we carry parts for, and we diagnose before we recommend replacing anything. Gate Motor Repair in Auburn covers motor symptoms, diagnosis, and replacement pricing.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Auburn
We service and stock parts for nine gate-motor brands, including Linear, Viking, Ghost Controls, and DoorKing. Most common motors and control components are on the truck or available same-week locally, which keeps turnaround short on Auburn calls. See our brands for the full list and what each one is known for.
Pricing for Gate Company in Auburn, WA
| Service | Typical range in Auburn |
|---|---|
| Service call and diagnosis | $95 – $145 |
| Gate off track / realignment | $180 – $320 |
| Hinges, hinges and latch (replace) | $220 – $410 |
| Weld / metal frame repair | $260 – $620 |
| Post replacement (steel or wood) | $340 – $780 |
| Gate motor replacement | $650 – $1,400 |
| Limit switch replacement | $180 – $300 |
| Loop detector replacement | $220 – $400 |
| Remote / keypad programming | $85 – $160 |
| Full gate installation | $1,800 – $6,000 |
What pushes a price up in Auburn is usually the site itself: steep driveway grade, a post set in wet soil that needs a deeper footer, or an HOA repair that has to match existing materials. Whatever the job, you get a written price before we start, and that number does not move at the door.
Neighborhoods We Serve in Auburn
We run jobs across the full Auburn service area, from the valley floor up through the hills and out to the city’s edge.
- Lakeland Hills
- Lea Hill
- Scenic Hill
- North Auburn
- South Auburn
Typical response time for the Auburn area is same-day or next-day, depending on the call and the season. If it’s an emergency – a gate stuck open or a vehicle trapped on one side – tell the dispatcher and we’ll prioritize it.
Service Area – Cities Near Auburn
We serve Auburn and the surrounding south King County and north Pierce County communities. If your home is just across the city line in Kent, WA, Federal Way, WA, Pacific, WA, or Milton, WA, the same crew and the same written-price standard apply. Dispatch and scheduling are coordinated from our Seattle metro office; crews serve Auburn locally every day.
Serving Auburn, WA – Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Auburn
Most Auburn calls get same-day or next-day service. Emergency jobs – a gate stuck open, a vehicle trapped – are prioritized, and our phones are answered by a live person 24/7, so you’ll know your window before you hang up. Call (469) 530-2485.
Most repairs don’t need a permit, but replacement gates in HOA-governed communities like Lakeland Hills often need design approval first. If your HOA has a spec sheet, we’ll build to it. For City of Auburn setback questions, we’ll flag anything that looks nonconforming before quoting.
We cover the full city – South Auburn, North Auburn, Lea Hill, Lakeland Hills, Scenic Hill, and everything between. Dispatch runs from our Seattle metro office, and crews are in Auburn every working day.
Everything. You get a written price before any work begins, on every job, in Auburn or anywhere else we serve. The number on the paper is the number you pay. If we find something else during the job, we stop and quote that separately before touching it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Auburn Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.