Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Benbrook
If your gate motor quit working in Benbrook, the fix usually comes down to one of three things: a failed control board, a power or wiring fault, or a gate that’s out of alignment and binding the operator. Most gate motor repairs in Benbrook run $240 – $480 for common failures like limit switches, loop detectors, and receiver boards, while a full operator replacement typically lands between $1,200 and $2,600 depending on the brand and gate setup. We cover every neighborhood from Whitestone to Timber Creek, and our crews know which failure patterns show up most in this part of Tarrant County. Call (469) 530-2485 and a real person answers, day or night.
Benbrook’s gates take a beating from the ground up. The same expansive clay that cracks driveways and shifts fence lines across North Texas works on gate posts too. When a post heaves half an inch, a swing gate that worked fine for years starts dragging, the operator strains, and eventually the motor or the rack gives out. That’s the repair we do most often here, and it’s why our Gate Motor Repair team starts every Benbrook diagnostic at the hinge post and the footing, not just the motor housing.
Why Carver Gate Repair Is Benbrook’s Preferred Gate Motor Repair Company
Homeowners in Benbrook call us after they’ve already been through the wringer with a general handyman or a gate company that ghosted them. Lonnie Burke runs our crews to The Garrison Standard, which means three things on every single call: a written price before any work starts, a background-checked technician in uniform at your gate, and a written guarantee that covers the repair for a full year. No exceptions, no fine print, no “well, that wasn’t in the quote.”
Our phone line is staffed by a live person 24 hours a day, every day of the year, including holidays. When you call about a gate motor in Benbrook, you get a dispatcher who can tell you when a technician will arrive, not a voicemail box. We coordinate scheduling from the Dallas-Fort Worth office and keep Benbrook on a regular dispatch rotation, so most repair calls get same-day or next-morning service.
The Garrison Code governs how our techs behave once they’re on your property. That means shoe covers or a clean work area, no tobacco on site, a full explanation of what failed and why, and a written price on paper or by text before a single tool comes out. Homeowners off Chapin School Road and the neighborhoods around the lake tell us the same thing: the price we quoted is the price they paid. That’s the whole point.
Gate Remote Control in Benbrook
Gate Remote Control service in Benbrook usually means either programming a replacement transmitter, diagnosing a receiver board that stopped talking to the remotes, or clearing interference that’s blocking the signal. Remotes fail in predictable ways here: buttons wear out from daily use, batteries corrode in the summer heat, or a storm surge along the Benbrook Lake corridor takes out the receiver. A replacement remote for most brands runs $35 – $85 programmed on site, and a new receiver board typically costs $180 – $320 including labor.
What To Expect During A Remote Reprogramming
Most remotes can be programmed in under 20 minutes once we’re at the panel. We test every button, confirm the range from the street and from inside a vehicle, and clear any old codes from the receiver so a lost remote can’t open your gate.
When The Receiver Board Is The Problem
If new batteries and a fresh remote don’t fix it, the receiver is usually the culprit. Benbrook’s summer heat and spring lightning don’t do control boards any favors, and a board that’s been cooking in a metal box for fifteen years will eventually stop listening. We stock receiver boards for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most swaps happen on the first visit.
Gate Keypad in Benbrook
Gate Keypad repair in Benbrook covers everything from replacing a worn-out keypad to rewiring an underground run that’s been wrecked by soil movement or landscaping work. A new wired or wireless keypad installed runs $150 – $280 depending on the model and how far the wiring has to go. If the keypad’s fine but the gate won’t respond, the problem is usually at the operator or the loop detector, not the keypad itself.
Hardwired Keypads And Clay Soil Damage
Homes in established Benbrook neighborhoods often have hardwired keypads that run conduit underground to the operator. When expansive clay shifts through wet-dry cycles, that conduit can crack, the wire can shear, and the keypad goes dead. We trace the run, find the break, and either pull new wire or install a wireless keypad if the conduit is beyond saving.
Wireless Keypads That Stop Working After Storms
Wireless keypads are simpler but not bulletproof. A keypad mounted on a metal post near the Benbrook Lake corridor can lose signal after a spring storm if water gets into the housing or if lightning damage reaches the receiver. We open the unit, check the seal, and replace the unit outright if corrosion has set in.
Trusted Brands We Service in Benbrook
Our technicians are trained on nine gate-motor brands, and in Benbrook we see a lot of LiftMaster operators on newer Whitestone homes and a fair share of FAAC and BFT swing operators on older properties near the lake. We also work on Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Because we only do gates, we stock the boards, remotes, and limit switches that keep those systems running, which means fewer Benbrook customers wait on a part to ship from a distributor.
Common Gate Motor Repair Problems We See in Benbrook Homes
- Hinge post heave and rot. North Texas clay expands and contracts with every wet-dry season, and older post footings pour off-level. The gate sags, the operator binds, and the motor burns out trying to overcome the drag. We reset posts with deeper footings and re-hang the gate before replacing the operator.
- Control board and battery failures on solar openers. Solar gate openers mounted along the Benbrook Lake corridor get hammered by summer heat and spring storm surges. Batteries cook, boards short, and the gate won’t hold a charge. We check the panel, the battery bank, and the board on every solar call.
- Underground loop detector damage. Loop detectors buried in driveways across established Benbrook neighborhoods get cut by soil movement, tree roots, or a landscaping crew. The gate starts phantom-opening or refuses to close. We run a new loop or convert to a photocell-only setup when the driveway slab makes a new loop impractical.
- Worn rack and pinion on swing openers. When a gate post heaves even slightly, the operator’s rack and pinion takes the abuse. The teeth strip, the gate makes a grinding noise, and the motor eventually fails. Replacing the rack and realigning the gate fixes the root cause instead of just swapping the motor.
Pricing for Gate Motor Repair in Benbrook, TX
Here’s what Benbrook homeowners should expect to pay, in plain numbers. A service call and diagnostic runs $75 – $125, which we apply toward the repair if you approve the work. Common repairs like limit switch replacement, remote programming, or a new loop detector land between $180 and $400. A full operator replacement on a swing or slide gate runs $1,200 – $2,600 for the unit, plus $400 – $800 if we’re pouring a new post footing or re-running power. You get a written price before any work starts, and that number doesn’t move unless we find something we genuinely could not see before opening the panel. Call (469) 530-2485 for a free estimate over the phone.
We Also Serve Cities Near Benbrook
Our Benbrook crews also cover the wider DFW metro and communities throughout Texas, including Houston, San Antonio, Dallas, and Fort Worth. If you’re just outside Benbrook, call us and we’ll confirm which technician is closest to you that day.
Serving Benbrook, TX – Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Benbrook
A gate motor that keeps tripping the breaker usually has a short in the motor windings, a damaged capacitor, or a wiring fault between the panel and the operator. In Benbrook, we also check for a binding gate that’s forcing the motor to draw more current than the circuit will allow, which happens when a post heaves or a hinge seizes. The fix ranges from a simple hinge adjustment around $150 to a motor replacement at $500 – $900. Call (469) 530-2485 and we’ll diagnose it in one visit.
Yes. Automatic gate operators in Benbrook must comply with UL 325 safety standards, which means photo eyes or contact edges that stop and reverse the gate when something or someone is in the path. Any repair we touch includes a full reversal test before we leave. If your gate doesn’t have working safety sensors, we’ll quote the addition in writing before doing the work.
Most gate motor repairs in Benbrook are finished in 90 minutes to 3 hours. A simple remote programming or limit switch adjustment is under an hour. A full operator replacement with a new post footing can take most of a day. We’ll give you an honest time window when you call, and our techs stick to it.
Yes. LiftMaster and FAAC are two of the most common operators we work on in Benbrook, and we carry boards, remotes, and replacement parts for both. We also service BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is discontinued and parts are gone, we’ll quote a replacement that fits your existing posts and hinge layout.
Check the battery in the remote and make sure the keypad isn’t full of water first. If both look fine, the receiver board or a tripped GFCI at the operator is the likely culprit. Storms along the Benbrook Lake corridor send surges through power lines that fry receiver boards on a regular basis. We can test the remote, keypad, and receiver in one visit and replace only what’s actually failed. Call (469) 530-2485 for an exact quote, estimates are free.
When you need gate motor repair in Benbrook, call (469) 530-2485. A live person answers, we give you a written price before any work starts, and every repair is covered by our 365-Day Done Right Promise. Lonnie Burke and the Carver Gate Repair team handle the whole job clean, square, and done right.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Benbrook and the wider Dallas-Fort Worth area to The Garrison Standard since 2008.