Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Kennedale
Gate motor repair in Kennedale typically runs $180 – $420 for most residential fixes, with our crew usually on-site within a few hours of your call. We dispatch from our Dallas-Fort Worth coordination office and carry parts for Linear, Viking, Ghost Controls, and DoorKing systems so we don’t waste your afternoon driving back for inventory.
Kennedale sits on the edge of Tarrant County where the Blackland Prairie clay still shifts beneath driveways along Kennedale Parkway and Little School Road. That soil movement, combined with summer heat that pushes gate motors past 140 degrees in direct sun, means we see different failure patterns here than in rockier north Texas soils. We’ve worked on swing operators along Mansfield Road where the grade drops toward the creek beds, and on slide gates in the subdivisions near 287 where wind load from open prairie hits the motor harder than sheltered urban lots. When your gate stops mid-cycle at 10 PM or the remote quits responding on a Saturday morning, a live person answers our phones. Call (469) 530-2485.
Why Carver Gate Repair Is Kennedale’s Preferred Gate Motor Repair Company
Homeowners in Kennedale tell us the same thing: they’ve already dealt with contractors who quoted one figure, then handed over a bill with extras nobody mentioned. We don’t operate that way. Every repair starts with a written price you approve before we touch a tool. That number doesn’t move.
Our technicians are background-checked and uniformed, and they arrive in marked vehicles. We’ve worked on gate systems throughout the 76060 ZIP code, from the older ranch-style homes off Kennedale New Hope Road to newer builds near the intersection of 287 and Sublett Road. The Garrison Standard means we leave the site clean, explain what failed and why, and hand you a written guarantee good for a full year from the date of service. If the repair fails inside that window, we come back free. No argument, no re-diagnosis fee.
Phones are staffed by a live person 24 hours a day, including weekends and holidays. No voicemail trees, no “leave a message and we’ll call back Monday.”
Gate Motor in Kennedale
Gate Motor work in Kennedale covers the powered unit that drives your swing or slide gate, whether it’s an articulating arm bolted to a masonry pillar or a below-grade operator pulling a cantilever gate along a track. We repair and replace motors from nine brands, and we stock common failure parts locally so you’re not waiting on shipping from a warehouse three states away. A typical motor repair in Kennedale runs $180 – $340; full motor replacement when the unit is burned out or obsolete runs $380 – $620 installed.
Diagnosing the Real Failure Point
Many Kennedale homeowners assume the motor is dead when the gate won’t move, but we’ve found the actual culprit is often the loop detector, a failed limit switch, or a transformer damaged by the voltage spikes that follow summer storms rolling off the prairie. Our technician tests the full control chain before recommending a motor replacement. You’ll know exactly what’s broken and what it costs to fix it.
Matching Parts to Existing Systems
If your Kennedale home has a Viking or Ghost Controls operator, we carry replacement boards, capacitors, and gear assemblies for those units. For older DoorKing systems common in the subdivisions built during the 1990s and 2000s, we source compatible components rather than forcing a full system change when a single part fails.
Gate Remote Control in Kennedale
Gate Remote Control service in Kennedale covers everything from programming a new clicker to replacing a receiver board that no longer recognizes any transmitter. Remotes fail from heat damage, crushed circuit boards, or simply losing sync with the operator after a power outage. A new single-button remote programmed to your existing system runs $45 – $85 in Kennedale; multi-button units or smartphone-compatible receivers run $120 – $220 installed.
Receiver and Antenna Issues
When multiple remotes stop working at once, the problem is rarely the clickers themselves. We test the receiver range from the street, check antenna placement for damage from lawn equipment or weather, and verify the control board is sending proper voltage to the radio module. In Kennedale’s open terrain, we’ve seen antenna connections corrode faster than in more sheltered markets.
Upgrading to Modern Access Options
Some Kennedale homeowners want to add keypad entry for service workers or delivery drivers, or switch to telephone-entry systems that let them open the gate from anywhere. We can integrate these with your existing operator if the control board supports expansion, or quote a full upgrade path if your system is too old for add-ons.
Trusted Brands We Service in Kennedale
We work on nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kennedale customers, that means we don’t experiment with your system. Our trucks stock capacitors, limit switches, and control boards for Linear and Viking units, which we see frequently in the Tarrant County market. Ghost Controls and DoorKing parts are also on hand for the rural-property swing gates common along the eastern edge of our service area. When a specialty component is needed, our Dallas-Fort Worth coordination office sources it with next-day turnaround rather than two-week backorders. The right part, the first time, keeps your driveway secure and your schedule intact.
Common Gate Motor Repair Problems We See in Kennedale Homes
- Thermal shutdown in summer heat. Kennedale’s July and August temperatures, combined with motors mounted in direct sun on metal posts, push operators past their thermal limits. We relocate controls to shaded positions or spec higher-duty units when replacement is needed.
- Clay soil shift binding slide gates. The Blackland Prairie clay expands and contracts with moisture, throwing gate tracks out of alignment. The motor strains, overheats, and eventually fails. We check track geometry before blaming the operator.
- Lightning and surge damage. Open prairie means Kennedale properties see more direct lightning exposure than heavily treed neighborhoods. Surge protectors help, but we’ve replaced dozens of control boards after storms that fried everything between the transformer and the motor.
- Obstruction sensor false triggers. Wind-blown debris from open lots, leaves from the post oaks common along creek beds, and even spider webs in photo-eye housings cause gates to reverse or stop mid-cycle. We clean, realign, and test every safety device during service calls.
Pricing for Gate Motor Repair in Kennedale, TX
Most gate motor repairs in Kennedale fall between $180 and $340. That covers diagnostic time, labor, and standard parts like limit switches, capacitors, or control boards. If the motor itself is burned out or the gearbox is stripped, replacement runs $380 – $620 depending on brand and horsepower. Remote programming or replacement is $45 – $85 for basic units; keypad or telephone-entry upgrades run $120 – $220.
What moves the number: brand and age of the operator, whether the system is single or dual gate, and whether we need to address secondary damage like a shorted transformer or misaligned track. We inspect everything, give you a written price before starting, and you approve it. That price does not change once the job is open. Estimates are free. Call (469) 530-2485.
We Also Serve Cities Near Kennedale
Our crews work throughout the southern Tarrant County corridor. We handle Gate Repair in Kennedale and neighboring markets including Arlington, Mansfield, Burleson, and Fort Worth. If you’re on the edge of our service area and unsure, call and we’ll confirm coverage before scheduling. We also provide Gate Installation in Kennedale for properties needing new automated systems from the ground up.
Serving Kennedale, TX – Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Kennedale
We typically dispatch to Kennedale within two to four hours for standard calls, and our live phone staff coordinates priority routing for gates stuck open or closed. Call (469) 530-2485 and we’ll give you a firm arrival window.
Yes. We service properties along Kennedale Parkway, in the subdivisions near Little School Road and Sublett Road, and on the rural lots east of 287 toward Mansfield. Our Gate Motor Repair in Kennedale coverage extends to every address in the 76060 ZIP code.
Yes. Our phones are answered by a live person 24 hours a day, every day of the year, including weekends and holidays. If your gate is stuck open overnight or won’t close before a storm, we treat it as urgent.
Kennedale pricing tracks closely with the broader Tarrant County market. Labor rates are consistent across our service area, though rural properties with longer driveways or dual-gate systems may run slightly higher due to material and time requirements. We quote your specific job in writing before starting.
Every repair carries our 365-Day Done Right Promise, a written guarantee covering parts and labor for a full year from the date of service. If the same problem returns inside that window, we come back at no charge. This applies to all Gate Motor Repair work we perform in Kennedale.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Kennedale and the Dallas-Fort Worth area since 2008.