Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fulshear, TX
Carver Gate Repair handles gate service across Fulshear, from Cross Creek Ranch and Fulbrook to smaller acreage tracts west of town. Most Fulshear gates are heavy ornamental steel or wrought iron on brick columns, and the local clay soil shifts enough through wet-dry cycles to pull posts out of alignment. That means gate repair here often starts with realigning the frame before touching the motor. If your gate is dragging, binding, or not closing, call (469) 530-2485 and we’ll send a background-checked technician with a written price before any work starts.
Why Fulshear Homes Are Different
Fulshear sits on expansive clay soil that swells after rain and contracts in the summer heat. A gate that opens cleanly in March can bind by August when the ground dries out and the posts creep. We see this most often on larger driveway gates in Cross Creek Ranch and Weston Lakes, where the gate leaf is long enough that a quarter-inch of post movement at the base becomes two inches of sag at the latch. The fix usually involves resetting the post or adjusting the hinge plates, not replacing the operator. Knowing that difference saves Fulshear homeowners real money.
The housing stock matters too. Most Fulshear gates are newer builds from the last fifteen years, often paired with LiftMaster or FAAC operators installed by the original builder. Those systems are good equipment, but the installations are frequently rushed. We routinely find control boards mounted where irrigation overspray can reach them, and loop detectors buried too shallow under driveways, which fails when a heavy pickup compresses the soil. Fulshear also has active HOA communities, so any gate work on a shared entrance typically needs board approval before we can touch the equipment. We know how to write a quote that satisfies most Fulshear HOAs on the first pass, including line items for the exact operator and hardware.
Our Main Fulshear Services
The two calls we get most in Fulshear are for gates that won’t open in the morning and motors that run but no longer move the gate. Each of these has its own dedicated page where you’ll find pricing, timelines, and what to expect.
Gate Repair in Fulshear
Most Fulshear gate repairs come down to four things: a bent or sagging frame, a failed hinge or wheel, a broken limit switch, or power that never reaches the operator. On a single-family driveway gate in Fulbrook or Jordan Ranch, we can usually diagnose the fault in under an hour and have the part on the truck. The clay soil here means a gate that worked fine last week may have simply settled out of square. We square the frame first, then adjust the operator, so the repair lasts longer than a parts swap. See Gate Repair in Fulshear for what a typical repair includes and what it costs.
Gate Installation in Fulshear
New gate installation in Fulshear usually means either replacing a developer-installed gate and operator with something heavier and quieter, or adding a gate to a property that never had one. We measure the opening, check the column depth and soil condition, and confirm the power run before quoting. On Fulshear’s clay soil, we often recommend deeper post footings than the original concrete work, which is the single biggest factor in how straight the gate stays over a Texas summer. The full scope, timeline, and written price are covered on Gate Installation in Fulshear.
Gate Motor Repair in Fulshear
When a Fulshear gate sounds like it’s running but the leaf doesn’t move, the operator is usually at fault, not the gate itself. We repair motors from LiftMaster, FAAC, BFT, Linear, Viking, and the other brands we support, and we stock the common circuit boards and limit switches in our Houston parts room so a Fulshear job doesn’t wait on a two-day shipment. If the motor is beyond repair, we’ll give you a written replacement price on the spot. Details on operator repair and motor replacement are on Gate Motor Repair in Fulshear.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fulshear
Our technicians are trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. We carry common boards, limit switches, and safety-edge parts for the brands we see most in Fulshear, which keeps most repairs to a single visit. You can check our brands page for the full list.
Pricing for Gate Company in Fulshear, TX
| Service | Typical range in Fulshear |
|---|---|
| Gate repair diagnostic visit | $0 with any approved repair |
| Gate alignment and hinge adjustment | $150 – $300 |
| Limit switch replacement | $180 – $340 |
| Gate wheel or roller replacement | $120 – $280 |
| Safety sensor or photo-eye replacement | $150 – $325 |
| Gate motor repair (board or capacitor) | $250 – $550 |
| Gate motor replacement (operator only) | $900 – $2,500 |
| Full gate installation (single driveway) | $3,500 – $8,000 |
| Full gate installation (double driveway) | $6,000 – $14,000 |
| Loop detector replacement | $350 – $700 |
What moves a Fulshear quote upward is usually column work. If the brick columns have shifted or the footing is cracked, we have to address that before a new gate or operator goes on, and that’s masonry time. Gate width is the other driver: a double-leaf ornamental steel gate in Cross Creek Ranch costs more than a single tubular steel gate on an acreage lot west of 359. Whatever the number, it’s written down and agreed before we open a tool bag.
Neighborhoods We Serve in Fulshear
We run calls across Fulshear’s master-planned communities and the acreage properties on the west and south edges of town. Most repairs are reached same-day or next morning, and we’ll give you a straight arrival window when you call.
- Cross Creek Ranch
- Fulbrook
- Weston Lakes
- Jordan Ranch
- Fulshear Run
Service Area – Cities Near Fulshear
If you’re outside Fulshear proper, we also cover Richmond, TX, Katy, TX, Rosenberg, TX, and Sugar Land, TX. Dispatch for all of these runs from our Houston office, and the same written-price and written-guarantee standard applies wherever the job lands.
Serving Fulshear, TX – Our Local Coverage Area
We’re based in the Fulshear area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fulshear
Most Fulshear calls are reached the same day you call, with afternoon being the busiest window. If the gate is stuck open or won’t close, tell the person on the phone and we’ll prioritize it. You’ll get a straight arrival window, not an open-ended time range.
For a single-family driveway gate, usually not, but if you live in a community with a shared or monument entrance gate, yes, the HOA typically has to approve the work before we start. We can provide a written quote with the equipment names and scope to submit to your board.
Every gate repair is covered by a written guarantee for a full year from the date of service. If the same repair fails inside that window, we come back and fix it at no charge. That’s the Garrison Standard, and it’s printed on your invoice, not buried in fine print.
Whether it’s a dragging gate in Fulbrook or a dead operator in Weston Lakes, call Carver Gate Repair at (469) 530-2485 for a free estimate. A live person answers around the clock, seven days a week, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fulshear Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.