Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Celina, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor work in Celina year-round. Homes here sit on larger lots than you’ll find closer in toward Dallas, which means longer driveway runs, heavier gate leafs, and operators that cycle more often. That changes the work. Clay soil movement shifts gate posts out of plumb faster than in rockier ground, and open exposure to north Texas wind puts constant load on hinges and cantilever rollers. If your gate is dragging, sagging, or failing to close, call us at (469) 530-2485 and we’ll send a background-checked, uniformed technician with a written price in hand before any work begins.
Why Celina Homes Are Different
Celina’s growth has produced a mix of gate setups. East of Preston Road, you’ll find newer acreage communities like Mustang Lakes and Carter Ranch where ornamental steel driveway gates, often automated, are standard. West Celina and older sections along Highway 289 have a different profile: lighter farm-style gates, chain-link frames, and manual swing gates that predate today’s operator systems. Both need different approaches.
Soil is the biggest factor. Celina sits in the Blackland Prairie belt, where expansive clay expands and contracts with rain and drought. We regularly see gate posts lean, latch bars fall out of alignment, and operators bind because the post moved a half inch. On a service call, we level the gate, reset the post base if needed, and recalibrate the operator to the new geometry rather than just greasing hinges and leaving. It’s the difference between a gate that still works in August and one that’s back to binding by Thanksgiving.
Wind exposure is the second factor. Celina is flat and open, with few mature tree lines compared to established suburbs. A 16-foot gate leaf catches a lot of north wind in March. We check hinge welds and roller frames for fatigue on every call, because a gust-loaded gate fails at the weld, not the latch.
Our Main Celina Services
Most Celina homeowners reach out for one of two reasons: a gate that no longer opens or closes, or a motor that responds intermittently. Here’s how each job goes.
Gate Repair in Celina
Repair calls in Celina usually involve sagging or binding gates with posts that have shifted in clay soil. We straighten or reset posts, re-hang the leaf, replace worn hinges and rollers, and weld cracked frames when needed. Gate Repair in Celina covers the full range, from latch replacement to structural fixes. Every repair carries a written one-year guarantee through the 365-Day Done Right Promise. If the same problem returns inside a year, we come back and make it right at no charge.

Gate Installation in Celina
New gate work in Celina starts with measuring the driveway opening, checking the ground slope, and confirming post depths against clay soil movement. We build and set steel frames, hang the leaf, and coordinate any operator installation you request. Gate Installation in Celina walks through material choices, design, and scheduling. You get a written price for the full job before we order anything, so the number doesn’t move once work starts.

Gate Motor Repair in Celina
Motor failures in Celina cluster around two causes: limit switches out of adjustment after post movement, and control boards degraded by north Texas heat and lightning surges. We diagnose the specific issue, replace the failed component when possible, and only recommend a full operator swap when the repair math doesn’t work. Gate Motor Repair in Celina has the details. Technicians carry common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which keeps most repairs to one visit.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Celina
Our Celina trucks stock parts and control boards for Linear, Viking, Ghost Controls, and DoorKing systems, among the nine brands we cover. Because we service our brands across the metro daily, we can usually match the exact torque rating and board revision of what your gate already has, which matters more than people realize on replacement parts.
Pricing for Gate Company in Celina, TX
| Service | Typical range in Celina |
|---|---|
| Gate repair service call | $89 – $149 |
| Hinge replacement (steel, both leafs) | $180 – $340 |
| Gate post reset (single post, in place) | $285 – $475 |
| Latch or lock replacement | $110 – $220 |
| Welded frame repair (cracked steel) | $150 – $300 per section |
| Gate installation (single swing leaf, steel) | $2,400 – $5,800 |
| Gate installation (double swing, steel) | $4,500 – $9,200 |
| Slide gate installation | $3,800 – $8,500 |
| Gate motor / operator replacement | $850 – $2,100 |
| Limit switch replacement | $160 – $280 |
| Loop detector replacement | $220 – $380 |
| Remote / keypad programming (per opener) | $60 – $120 |
Prices in Celina run toward the higher end when a post has shifted deep in clay and we’re digging and re-setting concrete, or when a door is oversized and the operator needs a heavier-duty arm. Lower-end pricing assumes standard hinge work or a straightforward component swap. Whatever the quote is, it’s written down before we touch the gate. The number does not change at the door or after the job is open.
Neighborhoods We Serve in Celina
We run calls across Celina daily, from the acreage east of Preston Road to the newer sections around Light Farms and the older streets west of downtown. Typical response for non-emergency repair is one to two business days, and we keep enough parts on the truck to resolve most motor and hinge jobs on the first trip.
- Light Farms
- Mustang Lakes
- Carter Ranch
- Sutton Fields
- Bluewood
Service Area – Cities Near Celina
Our Celina crews also cover the neighboring markets where homeowners run the same soil and wind conditions. If your property is just over the line, we can often route a technician the same day. That includes Prosper, TX, Frisco, TX, Melissa, TX, and McKinney, TX. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, with crews dispatched locally to Celina.
Serving Celina, TX – Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Celina
We maintain Celina coverage Monday through Saturday, with most non-emergency calls scheduled within one to two business days. A gate that is stuck open and protecting a backyard or driveway gets priority routing. Call (469) 530-2485 and a live person answers around the clock.
It depends on your subdivision’s covenants. Communities like Light Farms and Mustang Lakes often require pre-approval for visible changes like a full gate replacement or a new operator type. Straight repairs to existing equipment usually move forward without review. We can tell you what your HOA typically asks for during the estimate.
No separate travel fee applies for Celina. Our service-call rate covers the trip and on-site diagnosis, and you receive a written quote for any repair before work starts. If you approve the work, the service-call fee rolls into the job total.
For gate work in Celina, call (469) 530-2485. A real person picks up, you get a written price before the work begins, and every repair is covered by a one-year written guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Celina Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.





Before
After
Before
After
Before
After