Gate Repair in Antioch - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Antioch

Gate repair in Antioch usually runs between $220 and $680 depending on whether it’s a sagging wood gate, a twisted metal hinge post, or a failed motor on an automatic driveway gate. Most repairs we handle across Antioch are completed in a single visit, and we carry the common parts for Linear, Viking, Ghost Controls, and DoorKing operators on our trucks. If your gate won’t open, won’t stay closed, or has started dragging across the driveway, call (469) 530-2485 and you’ll get a live person on the line, not a voicemail box. We dispatch uniformed, background-checked technicians to Antioch neighborhoods every weekday, and we answer phones around the clock for emergency calls.

Call (469) 530-2485

Why Carver Gate Repair Is Antioch’s Preferred Gate Repair Company

Antioch homeowners call us because gates here fail in predictable ways, and we address the cause rather than just patching the symptom. Our technicians work on gates throughout Antioch, from the older subdivisions off Lone Tree Way to the newer developments south of Highway 4 and the neighborhoods backing up to the San Joaquin River corridor. We know what the Delta wind does to a 14-foot wood swing gate, and we know what Antioch’s clay soil does to hinge posts over three or four seasons.

Every Carver technician arrives in uniform with a background check already on file. Before any work begins, you get a written price. That number doesn’t move at the door. Every repair is covered by a written 365-Day Done Right Promise, which means if the repair fails within a year, we come back and make it right at no charge. That’s the Garrison Standard, and it applies to every job in Antioch, no exceptions.

Lonnie Burke, who leads our Antioch service area, holds the crew to a simple rule from the Garrison Code: show up when you say you will, quote a fair number, and leave the gate working better than you found it. We don’t do estimates that grow once the job is open, and we don’t leave a mess in your driveway.

Metal Gate Repair in Antioch

Metal gate repair in Antioch typically costs $240 to $640, and the most common jobs we perform are hinge and post replacement, weld repair on rusted or cracked steel, and realignment of gates that have sagged out of square. Homes in Antioch with steel or wrought iron driveway gates face a particular problem: the expansive clay soil under the posts moves with wet winters and dry summers. That movement racks the gate frame until it binds against the latch or drags on the concrete.

A proper metal gate repair in Antioch starts with the post, not the gate leaf. We check whether the post is still plumb and whether the footing is set deep enough to resist seasonal movement. If the post has shifted, resetting and re-anchoring it in a deeper concrete footing is the only repair that lasts. Bolting on a new hinge to a post that’s still moving just means you’ll call us again next spring.

Hinge and Post Replacement

When a metal gate starts scraping the ground or the latch won’t line up, the hinges and posts have usually moved. We cut out the old hinge barrels, re-plumb the post, and weld in new greaseable hinges sized for the gate’s weight. The gate should swing with one hand when we’re done, on both the open and close stroke.

Weld and Rust Repair

Delta moisture works its way into unpainted steel and iron, especially at the bottom rail and the hinge plates. We cut out the rusted section, weld in matching steel, and grind the joint smooth before priming and painting. If the damage is beyond local repair, we’ll tell you straight before quoting a replacement section.

Wood Gate Repair in Antioch

Wood gate repair in Antioch generally runs $180 to $520. Most of what we fix here comes down to two things: post rot from groundwater and Delta moisture, and frame sag from the gate’s own weight. A heavy cedar or redwood gate swinging on three-inch hinges will eventually tear the screws out of a softened post, and once the gate sags, the latch stops lining up and the bottom edge drags the sidewalk.

Our approach is to correct the structure before touching the surface. We rebuild the gate frame with pressure-treated lumber where it meets the post, replace rotted sections, and install a diagonal brace in the correct orientation so the gate holds its shape. If the post itself has rotted at ground level, we dig it out, replace it, and set the new post in concrete with drainage graded away from the base.

Frame Rebuilding and Sag Repair

A wood gate that drags usually has a broken or missing diagonal brace. We rebuild the frame with glued and screwed joints, add the brace, and then re-hang the gate on new hardware with longer lag bolts that actually grab solid wood. The gate should clear the driveway by a consistent inch across the full swing.

Rot and Post Replacement

Antioch’s clay soil holds water against the buried section of a wood post long after the surface looks dry. We inspect the post at ground level with an awl test, and if it’s soft, we replace it. New posts go into concrete footings with gravel drainage so they don’t sit in standing water through the wet season.

Trusted Brands We Service in Antioch

We work on the operator brands already installed on Antioch gates, including Linear, Viking, and DoorKing, plus Ghost Controls for residential swing systems. Our trucks carry the common boards, remotes, limit switches, and safety sensors for these brands, which means we can usually complete a motor repair in one trip instead of ordering parts and making you wait. If your operator is old enough that parts aren’t reliably available, we’ll show you replacement options matched to your gate’s weight and cycle count, and we’ll quote you a written price before ordering anything. Carver’s technicians are trained on nine gate-motor brands, so the repair matches the system you already have.

Common Gate Repair Problems We See in Antioch Homes

• Settled hinge posts from expansive clay. Antioch’s soil swells in wet winters and shrinks in dry summers, which slowly racks gate posts out of plumb. The gate then drags, binds, or the latch refuses to line up, and the fix requires resetting the post in a deeper footing.
• Misaligned slide gate operators on sandy soil. In areas with non-compacted, sandy fill near the San Joaquin River corridor, slide gate tracks shift and the rack-and-pinion drive jumps teeth. We re-level the track, re-bed the footing, and align the operator so the motor isn’t fighting the track with every cycle.
• Missing safety photocells and loop detectors on older operators. Many original operators on older Antioch properties predate current UL 325 entrapment standards. We retrofit photocells and loop detectors where they’re missing and test the immediate-reverse function so the gate stops and reverses under obstruction.
• Wind damage on oversized wood swing gates. The Delta breeze pushes hard against tall wood gates, and a 12-foot gate with weak hinges flexes and tears at the hardware. We install heavier hinges, stiffen the frame, and verify the operator’s force limits are set low enough to reverse safely.

Pricing for Gate Repair in Antioch, CA

We Also Serve Cities Near Antioch

Our service area covers the surrounding communities of Oakley, Pittsburg, Clayton, and Brentwood. If you’re just outside Antioch and need a gate repaired, call us and we’ll let you know when we can have a truck out. Our scheduling is coordinated from our San Francisco Bay Area office, and our crews work locally in Antioch throughout the week. For a full overview of what we do, see our Gate Repair service area and our dedicated page for Gate Repair in Antioch.

FAQs About Gate Repair in Antioch