Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Brentwood
If your gate won’t open, sags against the ground, or grinds halfway down the rail, you need a technician who shows up on time and quotes a number that doesn’t move. Carver Gate Repair dispatches background-checked, uniformed technicians to every Brentwood neighborhood, from Deer Ridge to the Garin Ranch area, with written prices delivered before any work starts. We work exclusively on gates and Brentwood Gate Motor Repair, which means the person at your property in Brentwood has likely fixed your exact problem dozens of times this year. Call (469) 530-2485 and a live person answers, day or night.
Why Carver Gate Repair Is Brentwood’s Preferred Gate Repair Company
Brentwood homeowners have dealt with enough no-shows and price changes at the door. Our crew runs on the Garrison Standard: a written price before work begins, a written guarantee on every repair, and a full-year promise that covers a free second visit if the repair fails. That guarantee isn’t a sales line. It’s in writing, on paper, for every single gate we touch in Brentwood.
Our technicians are background-checked and uniformed, so when you open the gate for us, you know exactly who’s walking onto your property. We answer the phone with a live person 24/7, including weekends and holidays. No voicemail queues, no waiting until Monday for a callback. When a gate quits at 9 p.m. on a Friday in Brentwood, you get a real person on the line and a plan to get it moving again.
We service nine gate-motor brands, including FAAC, BFT, Linear, and Viking, which matters when you need parts matched to the system already bolted to your driveway. Brentwood’s housing stock runs heavily toward automated slide gates and wrought iron swing gates, and we carry the parts those systems fail on most often. Lonnie Burke leads our Brentwood service area, and the standard he holds the crew to is the same one we’ve operated under since 2008.
Sliding Gate Repair in Brentwood
Sliding Gate Repair in Brentwood usually comes down to one of three problems: a rack and pinion that’s worn or misaligned, a limit switch that’s lost its setting, or a track that’s shifted out of level. Temperature swings between Brentwood’s hot summers and chilly winter mornings cause metal rails and racks to expand and contract, which gradually knocks the operator’s limits off. The gate then stops partway, reverses for no reason, or grinds against the track.
Rack, Track, and Operator Adjustments
We recently serviced a LiftMaster slide gate in Deer Ridge where the rack and pinion was misaligned and the gate would jam halfway. After re-leveling the track and adjusting the operator’s limit switches plus testing the safety photocell and loop detector, the gate ran smoothly. That job ran $185, including the adjustment and testing, and the customer had it back the same afternoon.
Slide Gate Motor Repair
When a slide motor is beyond adjustment, replacement typically runs $600 to $1,100 in Brentwood depending on the operator and horsepower. We install and program FAAC, BFT, Linear, Viking, and five other brands, and we stock the common replacement parts locally for faster turnaround. Before swapping a motor we verify the track, wheels, and rack are sound, because a new operator on a bent rail will fail the same way the old one did.
Wrought Iron Gate Repair in Brentwood
Wrought Iron Gate Repair in Brentwood frequently starts with a post that’s settled in clay soil. The gate itself may look fine, but the post has shifted a fraction of an inch, and the panel now sags far enough to drag on the latch side. Brentwood’s clay-heavy ground expands when wet and contracts when dry, and that cycle works on post footings year over year. Hinge adjustments help for a while, but the only lasting fix is resetting or re-torquing the post footing, then re-aligning the panel.
Hinge and Post Reset
We re-torqued a hinge post on a swing gate in Deer Ridge recently to stop a sag that had started rubbing the concrete. The fix involved resetting the post in fresh concrete, re-hanging the gate, and checking the latch and closer alignment. That job ran $320 and took one visit. A bent hinge replacement on a wrought iron gate in Brentwood typically runs $140 to $220 per hinge, depending on size and hardware.
Rust Repair and Repainting
Brentwood’s dry summers slow rust, but winter fog and irrigation overspray push it along. We cut out rusted sections, weld in matching stock, grind the repair smooth, and prime and paint to match the existing finish. Wrought iron rust repair in Brentwood usually runs $220 to $450 depending on how far the rust has gone.
Trusted Brands We Service in Brentwood
Our technicians are trained on FAAC, BFT, Linear, and Viking equipment, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common replacement parts staged for Brentwood jobs, which means a motor replacement or limit switch repair often happens same-visit rather than after a week waiting on a shipment. If your gate operator has a brand label on it, we probably have a technician who knows it cold. More on our equipment coverage on the Gate Repair hub page.
Common Gate Repair Problems We See in Brentwood Homes
- Hinge post settling in clay soil. Brentwood’s clay-heavy lots expand and contract with moisture, and swing gate posts set into it gradually lean inward. The gate sags, binds on the latch, and eventually refuses to close. Fixing just the panel won’t last because the post keeps moving. The post has to be reset.
- Slide gate rack and pinion wear from temperature swings. Brentwood sees summer highs near 100 and winter lows in the 30s, and that range works metal parts loose over time. Missed limits and a gate that stops mid-travel are the usual signs.
- Safety photocell misalignment after landscaping or ground shifts. When a sprinkler line settles the ground or a gardener bumps a sensor post, the photocell loses its beam. The operator then refuses to close, which reads as a stuck gate. Realigning and testing the beam usually solves it.
- Gate lock and latch failure from age and weather exposure. Exterior locks on Brentwood gates take full summer sun and winter fog. Cylinders seize, latch bolts stick, and keyless entry pads crack. We replace or rebuild locks and keep the closer working smoothly.
Pricing for Gate Repair in Brentwood, CA
A typical Brentwood gate repair runs $175 to $325 for most on-site fixes: limit switch adjustments, track realignment, hinge tightening, and lock repair. Motor replacement runs $600 to $1,100 depending on the operator, and gates that need post resets or welding work run $300 to $500. Rust repair and repainting on wrought iron runs $220 to $450. We give you a written price before any work starts, and that number doesn’t change at the door. Call (469) 530-2485 for a free estimate, and the price you hear is the one you’ll see in writing.
For a look at how we price repairs across the wider area, see Gate Repair in Brentwood.
We Also Serve Cities Near Brentwood
Our Brentwood crew regularly works in Brentwood and the surrounding communities of Oakley, Discovery Bay, Antioch, and Clayton. If your gate is in one of those towns, the same written pricing and background-checked technicians cover you.
Serving Brentwood, CA – Our Local Coverage Area
We’re based in the Brentwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Brentwood
Most halfway stuck gates in Brentwood are slide gates with a worn rack and pinion or a misaligned track. Temperature swings expand and contract the metal, which knocks the operator’s limit switches out of calibration. The fix is re-leveling the track, adjusting the limits, and testing the safety sensors. Call (469) 530-2485 for an exact quote, estimates are free.
Test safety photocells monthly by blocking the beam with a box or hand while the gate closes. The gate should reverse immediately. In Brentwood, ground shifts from clay soil and irrigation often throw photocells out of alignment after a season, so an annual visual check by a technician is worth the visit.
Yes. A bent hinge on a wrought iron gate in Brentwood gets replaced or reinforced at $140 to $220 per hinge. If the sag is actually from a post that’s settled in clay soil, the post has to be reset in fresh concrete before the panel is re-hung, or the sag will return. We’ll tell you which one you have before quoting.
We service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are trained on all nine brands, and we keep common replacement parts staged in the area to cut downtime on Brentwood jobs.
No. Gate installation in Brentwood requires a free measure, a written price, and then scheduling because the work includes groundworks, power runs, safety edges, and reversal testing. Same-day installation would mean cutting corners on the parts that keep a gate safe. We schedule installations deliberately and you get a firm written price before anything is ordered. Call (469) 530-2485 to start with a free measure.
Contact Carver Gate Repair in Brentwood
If your gate is stuck, sagging, or grinding in Brentwood, call (469) 530-2485. A live person answers 24/7, gives you a free estimate, and schedules a background-checked technician who arrives with the parts and a written price. Every repair is covered by the 365-Day Done Right Promise, and if it fails within a year, we’re back at no charge.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Brentwood since 2008.