Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Brentwood, CA
Carver Gate Repair handles gate work across Brentwood, CA, from swing-gate hinge replacements in the older ranches near downtown to full motor overhauls in the newer subdivisions east of Fairview Avenue. We’re a gate-only shop, not a general contractor, which means the technician who shows up works on drive gates and gate motors every day. If you need a gate looked at in Brentwood, call (469) 530-2485 and you’ll reach a live person, not a voicemail box.
Why Brentwood Homes Are Different
Brentwood sits at the eastern edge of Contra Costa County, where the Delta breeze meets hot inland summers. That temperature swing matters for gate hardware. Steel expands and contracts through a typical Brentwood July, and we regularly see gate hinges that bind in the afternoon heat and loosen again overnight. Powder-coated finishes hold up better here than raw steel, but the real trouble spot is the electronics: control boards mounted inside metal boxes can cook on a 100-degree day, which shortens capacitor life and explains a lot of the motor failures we see in the Stonewood and Garin Ranch areas.
The housing stock varies enough that there’s no single “Brentwood gate.” Older homes along Balfour Road and near the downtown core often have chain-link or tubular steel gates on track wheels, with decades of soil settling behind them. Newer subdivisions in the Vineyards or the neighborhoods off Lone Tree Way lean toward ornamental iron and heavy composite driveway gates on steel posts. Each one fails differently, and the fix has to match what’s actually installed, not what a franchise tech assumes from a photo.
Our Main Brentwood Services
Most Brentwood calls to us fall into one of three categories: a gate that won’t open, a gate that needs to be replaced, or a motor that’s making noise and not doing its job. Each service has its own Brentwood page with local pricing and the details of how we work.
Gate Repair in Brentwood
A sagging gate in Brentwood is usually a hinge or post problem, not a mystery. We see it in older neighborhoods where the post footings have shifted in clay soil, and we see it in newer ones where a builder-grade hinge was never right. Our technicians will tell you exactly what’s failed, show you the worn part, and give you a written price before any work starts. The full breakdown of what we fix and what it typically costs is on the Gate Repair in Brentwood page.
Gate Installation in Brentwood
A new gate in Brentwood has to be sized for the wind gap between the Delta and the hills, and it has to sit on posts that won’t shift in the area’s expansive clay. We measure in person, order to the actual opening, and don’t cut corners on the post depth or the hardware. Every installation gets a written quote before we schedule, and the number does not move on install day. See the Gate Installation in Brentwood page for what a full install includes.
Gate Motor Repair in Brentwood
Heat and dust are the two things that kill gate motors in Brentwood. A motor that works fine in March can fail in August when the control board overheats or the limit switch shorts from accumulated grit. We carry parts for the common brands and can usually diagnose the fault in one visit. If the motor needs replacing, you’ll get the number in writing before we order anything. The Gate Motor Repair in Brentwood page covers the details.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Brentwood
Our technicians work on FAAC, BFT, and Linear equipment every week, along with Viking controllers on some of the larger Brentwood estate gates. We keep common boards, limits, and arm parts in local stock, so the fix usually doesn’t wait on a parts order. See our brands page for the full list.
Pricing for Gate Company in Brentwood, CA
These are the ranges we quote most often in Brentwood. The final number depends on your gate, your access, and what’s actually broken, but you’ll see the price in writing before we start.
| Service | Typical range in Brentwood |
|---|---|
| Hinge replacement (standard swing gate) | $180 – $340 |
| Track wheel replacement | $150 – $280 |
| Gate sag adjustment and realignment | $220 – $400 |
| Gate motor repair (control board or limit switch) | $250 – $550 |
| Gate motor replacement (single swing arm) | $900 – $1,800 |
| Safety sensor or photo eye replacement | $175 – $320 |
| Wire run repair (intermittent open/close fault) | $200 – $450 |
| Keypad or intercom replacement | $250 – $600 |
| Full gate installation (standard driveway swing gate) | $2,500 – $6,500 |
| Post replacement (single post, concrete set) | $400 – $850 |
What pushes the price up in Brentwood is usually the access: longer driveway runs, post replacements in clay soil that need deeper footings, or a motor that has to be relocated because the original mount was never done right. Whatever the number is, it’s written down and agreed before any work starts. We don’t do moving prices at the door.
Neighborhoods We Serve in Brentwood
We cover all of Brentwood and the surrounding unincorporated pockets. Most neighborhoods are within a 30-45 minute dispatch window for us, and we schedule in real arrival windows rather than “sometime between 8 and 6.”
- Downtown Brentwood and the older streets off Balfour Road
- Garin Ranch
- The Vineyards
- Stonewood
- Neighborhoods off Lone Tree Way and Fairview Avenue
Service Area – Cities Near Brentwood
Carver Gate Repair handles Brentwood and the surrounding Contra Costa cities. We regularly work in Oakley, CA, Discovery Bay, CA, Antioch, CA, and Clayton, CA. Scheduling is coordinated from our San Francisco Bay Area office, with local crews dispatched to Brentwood and the neighboring areas.
Serving Brentwood, CA – Our Local Coverage Area
We’re based in the Brentwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brentwood
For a non-working gate, we generally schedule within 24-48 hours in Brentwood, with real arrival windows. If a gate is stuck open or won’t close, call (469) 530-2485 and we’ll fit you in faster. A live person answers around the clock.
It depends on your HOA, and Brentwood has several. If your development has design review, we’ll provide the gate specs and materials list your HOA needs to approve the work. We don’t start installation until you have the approval in hand. Call (469) 530-2485 and we’ll talk through what your specific HOA requires.
We cover the full Brentwood city limits plus the unincorporated streets around the edge of town. If you’re not sure whether your property is in our service area, call (469) 530-2485 and we’ll confirm it in under a minute.
If your gate is acting up in Brentwood, call (469) 530-2485 for a free estimate. The price you get is the price you pay, and it’s in writing before we touch a wrench.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brentwood Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.