Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Conroe
If your gate is dragging, sagging, or no longer opening at all, here’s the short version: most gate repairs in Conroe run between $180 and $450 for common fixes, motor replacement typically lands between $650 and $1,400, and we can usually get a technician to your home within 24 to 48 hours. We cover every neighborhood in Conroe, from River Plantation to Barton Creek Ranch, and we answer the phone live around the clock. Call (469) 530-2485 and you’ll get a straight answer, a written price before any work starts, and a repair that’s guaranteed in writing for a full year.
Most of the gate problems we see in Conroe aren’t mystery failures. They’re soil movement, worn limits, tired motors, and photocells that lost alignment after a hard season. We know what to look for because we see it every week on gates across Montgomery County. When you call, you’re not getting a generalist who fixes gates between fence jobs. You’re getting a crew that works on gates exclusively, shows up in a uniform, and puts the price on paper before the first tool comes off the truck.
Why Carver Gate Repair Is Conroe’s Preferred Gate Repair Company
Carver Gate Repair operates to Gate Repair standards set by the Garrison Partners family, which has run to The Garrison Standard since 2008. Every technician who arrives at your Conroe home is background-checked and uniformed, so you know exactly who’s at your driveway before you open the door. We don’t use subcontractors. The person who shows up works for us and answers to Lonnie Burke, who has built this operation around one non-negotiable: a written price before any work starts, and a written guarantee on every repair.
Homeowners across Conroe have told us the same story for years: they called someone, got a low verbal estimate, and watched the number climb once the gate was in pieces. That doesn’t happen here. The price we quote is the price on the invoice, and if a repair fails inside the guarantee window, the second visit is free. No argument, no requote, no charge. We serve Conroe from the brand’s Houston office, which handles scheduling and dispatch, while our crews work locally throughout the Conroe area. That setup means you get a live person on the phone at any hour and a technician who knows the soil, the heat, and the gate systems common to this part of Texas.
Metal Gate Repair in Conroe
Metal Gate Repair in Conroe usually starts with a careful look at the hinge post and the welds, because this city’s soil doesn’t hold still. We’re not just patching a panel. We’re checking whether the post has settled, whether the weld has cracked from repeated stress, and whether the frame is still square enough for the operator to work without fighting itself.
Post, Hinge, and Frame Work
When a metal gate sags on one side in Conroe, the panel is often fine. The problem is usually the hinge post, which slowly leans or settles as the sandy loam under it shifts through wet and dry cycles. We reset posts with deeper footings than the original install typically used, then re-hang the gate and re-square the frame before testing the operator under load.
Weld Repair and Rust Treatment
Conroe’s humidity and rain cycles are hard on uncoated steel and even some powder-coated surfaces. Weld failures at the corner joints and hinge tabs are common on gates more than ten years old. We remove the rust, repair the weld, and re-coat the area so the repair doesn’t just last a season. A typical weld and rust repair on a residential metal gate in Conroe runs $150 to $350, depending on how much structural work is needed.
Wood Gate Repair in Conroe
Wood Gate Repair in Conroe has its own set of local challenges, and the biggest one is moisture. Conroe’s climate swings between soaking wet springs and long dry summers, which warps boards, loosens hardware, and rots the base of posts that sit in damp soil. When we repair a wood gate here, we’re looking at the whole assembly: the post, the hinges, the pickets, and the diagonal brace that keeps the gate from racking.
Structural Repair and Rebuilding
A sagging wood gate usually means a failed diagonal brace or a rotted post base. We replace the rotted section or reset the post with gravel and drainage so water doesn’t sit against the wood. Then we re-hang the gate, adjust the hardware, and add a brace if the original builder skipped it. A post reset and re-hang on a typical Conroe wood gate runs $250 to $500.
Hardware Replacement and Realignment
Hinges, latches, and closer hardware take a beating in this humidity. We carry heavy-duty hardware in our trucks and match the existing finish so the hardware doesn’t look like an afterthought. Realigning a wood gate and replacing worn hardware in Conroe typically runs $120 to $300. If the operator is involved, we’ll re-set the travel limits after the gate is square again so the motor isn’t working against a misaligned panel.
Trusted Brands We Service in Conroe
Our technicians in Conroe work on Viking, Ghost Controls, DoorKing, and Elite operators, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule systems. That matters when you have a motor that’s been failing intermittently and you need the right part matched to the right board. We keep common parts for these brands staged locally for Conroe service calls, which means less waiting on a shipment and a faster turnaround when your gate is down. You don’t need to know your operator’s model number before calling. We’ll identify it on site and work from the manufacturer’s specs.
Common Gate Repair Problems We See in Conroe Homes
- Hinge post heaving or settling. Conroe’s clay-to-sand soil absorbs water in wet seasons and contracts in dry ones, which slowly moves posts out of position. A post that shifts just half an inch is enough to make a swing gate drag, bind, or refuse to close.
- Safety photocells knocked out of alignment. Pollen, heat, and the occasional storm push safety beams out of alignment or foul the lenses over time. The operator will still run, but it runs without proper entrapment protection, which is a UL 325 compliance problem we flag and correct on every call.
- Rack and pinion wear on slide gates. When the concrete pad or track shifts even slightly, the operator binds against the rack. Owners usually hear grinding first, then a gate that stalls mid-travel. We catch this early by checking the track before the operator, not after.
- Dead or weak batteries on solar gate openers. Conroe gets enough sun, but a few cloudy weeks in a row can drain aging batteries. The opener may work fine most of the year and then fail in December or after a stretch of storms.
Pricing for Gate Repair in Conroe, TX
We Also Serve Cities Near Conroe
The same team that handles Gate Repair in Conroe also runs crews into Willis, Pinehurst, Spring, and Tomball. If you’re just outside the city limits or your property sits between two service areas, call us and we’ll sort out which crew gets to you fastest.
Serving Conroe, TX – Our Local Coverage Area
We’re based in the Conroe area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Conroe
My Conroe gate sagged on one side – do I need a new gate or just a fix?
You usually need a fix, not a full replacement. In Conroe, a sagging gate is most often caused by the hinge post settling or leaning in the clay-to-sand soil, not by a panel that has reached the end of its life. We reset the post with a deeper footing, re-square the frame, and re-hang the panel, and in most cases the gate outlasts the original install. A post reset and re-hang typically runs $250 to $500 on a standard residential gate. Call (469) 530-2485 and we’ll look at it before we recommend spending money on a new gate.
How do I know my automatic gate is safe under UL 325?
Your operator should have functioning photocells that reverse the gate when someone or something crosses the beam, and it should reverse on contact when it meets resistance. The UL 325 standard covers entrapment protection for automatic gates, and we test both functions on every repair call in Conroe. If the photocells are misaligned or the reversal force is set too high, the gate is not compliant, and we’ll correct that before we call the job done.
Do you work on LiftMaster, FAAC, and BFT operators in Conroe?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. The technician will identify your operator on site, match the right parts, and work from the manufacturer’s specs rather than guessing at settings.
Can you install a new gate the same day you come out?
No, and you should be suspicious of anyone who promises that. A proper gate installation in Conroe means digging and pouring footings that can handle the shifting soil, running power or solar, setting the operator, installing safety edges and photocells, and verifying the reversal testing under UL 325. That work is measured, ordered, and scheduled, not rushed into an afternoon. What we can do is come out, measure, and give you a written price for the full installation, with a sensible timeline.
Why does my solar gate opener in Conroe stop working after a cloudy stretch?
The most common cause is a battery that has lost capacity over time. Conroe gets plenty of sun, but a sequence of cloudy days drains an aging battery faster than the panel can recharge it. We test the battery, check the panel output, and replace whichever component is failing. A battery replacement on a residential solar opener in Conroe typically runs $120 to $250, and a new panel runs $150 to $400 if the panel itself has degraded.
Call Carver Gate Repair in Conroe
If your gate is down, dragging, or just running worse than it should, call (469) 530-2485. A live person answers, day or night. We’ll set a window, send a background-checked technician in a uniform, and put the price in writing before any work begins. Every repair carries the 365-Day Done Right Promise, backed by a written guarantee. If it’s not done right, we make it right, and the second visit is free. That’s The Garrison Standard, and it’s the only way Lonnie Burke and the Carver Gate Repair team operate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Conroe and the surrounding Montgomery County area.