Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Conway
Gate repair in Conway typically runs $180 – $650 depending on what’s broken, and most calls we dispatch from our Miami office reach Conway homes the same day. A sagging driveway gate off Hiawassee Road or a swing operator that quit after last week’s thunderstorm doesn’t fix itself, and it leaves your property open to whoever drives by. We’ve handled both for Conway homeowners, and we know the difference between a quick hinge adjustment and a full post reset.
Our crew covers the full stretch from Conway proper out to the neighborhoods near Lake Conway and down toward Hoffner Avenue. Calls come through to a live person 24 hours a day, including weekends and holidays. When you reach us, we book an arrival window, confirm who’s coming, and deliver a written price before any work starts. That’s The Garrison Standard, and it’s how we’ve operated since 2008.
Need a technician now? Call (469) 530-2485. Estimates are free.
Why Carver Gate Repair Is Conway’s Preferred Gate Repair Company
We’ve built our reputation in Conway on showing up when we say we will and leaving the site cleaner than we found it. Homeowners near Curry Ford Road and Conway Gardens tell us the same thing: they’ve had general contractors treat gate work as an afterthought, then disappear when the motor fails again. We don’t do that. Every repair carries our 365-Day Done Right Promise in writing. If it fails inside that window, we come back free of charge, no argument.
Our technicians are background-checked and uniformed, and they arrive in marked vehicles. You know who’s coming through your gate before they get there. We stock parts for FAAC, BFT, Linear, and Viking systems at our South Florida facility, which means most Conway repairs don’t wait on shipping. Our Gate Repair team handles swing gates, slide gates, and barrier arms across Orange County, and we’ve worked on everything from 1980s ranch-style installs to new automated systems in the Conway Isles area.
Dispatch and scheduling run through our Miami office, but the crew that reaches your Conway property is local. That matters when you’re standing in your driveway with a gate that won’t close at 7 PM on a Saturday.
Wood Gate Repair in Conway
Wood Gate Repair in Conway, FL addresses the warped panels, rotted bottom rails, and failed hardware that Florida humidity accelerates faster than almost anywhere else. A typical wood gate repair in Conway runs $220 – $480, with full panel replacement or post work pushing toward the higher end. We see the worst damage on gates facing west, where afternoon sun bakes the wood before evening storms soak it.
Rot and Moisture Damage
Conway’s clay-heavy soil holds water against post bases, and our summer thunderstorms don’t help. We dig out rotted sections, treat the remaining wood with a copper-naphthenate preservative, and sister in new pressure-treated lumber where the structure allows. If the post itself is gone, we pour a new concrete footing and reset the gate plumb.
Hardware and Hinge Fatigue
Gate hinges on wood frames work loose over time, especially on heavier double gates common in the Lake Conway area. We through-bolt with galvanized carriage bolts rather than relying on lag screws that strip out. For gates over 200 pounds, we upgrade to ball-bearing hinges that won’t groan or bind.
Driveway Gate Repair in Conway
Driveway Gate Repair in Conway, FL covers the automated systems and heavy-duty hardware that secure most residential entrances in this part of Orange County. A standard driveway gate repair here costs $280 – $650, with motor replacement or loop detector work at the upper range. Many Conway homes built in the 1990s and 2000s have original operators nearing end of life, and the salt air from afternoon storms corrodes circuit boards faster than inland Orlando.
Operator and Motor Failures
We service nine brands including FAAC, Linear, and Viking, so we match parts to what’s already installed rather than forcing a full system swap. Common issues we find: burned capacitors from power surges during Florida lightning season, stripped worm gears from gates hitting obstacles, and failed limit switches that don’t know when to stop. Our Gate Motor Repair in Conway page breaks down motor-specific work if that’s what you’re facing.
Track and Roller Problems
Slide gates along Hoffner Avenue and the Conway Road corridor collect debris in their tracks, and the aluminum rollers flatten where they carry too much weight. We clean and level the track, replace worn V-groove or cantilever rollers, and adjust the chain tension so the motor isn’t fighting friction every cycle.
Trusted Brands We Service in Conway
We maintain active parts inventory for FAAC, BFT, Linear, and Viking operators, which covers the majority of automated gates we see in Conway. That inventory sits at our South Florida facility, not a warehouse three states away. When a Conway homeowner calls with a Viking slide operator that won’t respond to the remote or a BFT swing arm that’s leaking hydraulic fluid, we don’t order parts and make you wait. We pull them, load the truck, and head your way. Our technicians train on each brand’s diagnostic protocols, so we read error codes correctly the first time rather than guessing through a reset sequence. If your system is one of the other five brands we cover, we source parts through our dealer network with next-day availability to the Orlando metro.
Common Gate Repair Problems We See in Conway Homes
- Lightning and surge damage to control boards. Conway sits in one of Florida’s most active lightning corridors. A direct hit or near-miss sends voltage through the loop detector and fries the logic board. We install surge protectors on new repairs and keep replacement boards in stock for FAAC and Linear systems.
- Rust-through on welded steel frames. The combination of high humidity and afternoon downpours attacks gate frames from the inside out, especially on older installs near Lake Conway where the water table sits high. We cut out rotted sections, weld in fresh steel, and apply a zinc-rich primer before finishing.
- Misaligned gates from shifting posts. Conway’s sandy clay soil expands and contracts with rainfall, and gates that were plumb in March drag by September. We reset posts with deeper footings and add adjustable hinge plates so future settling doesn’t bind the gate.
- Failed safety loops and photo eyes. Vehicles running over the driveway cut the loop wire, and Florida sun degrades photo eye lenses. We splice loop wire with waterproof connections and replace faded eyes with IR units rated for direct sunlight exposure.
Pricing for Gate Repair in Conway, FL
Here’s what gate repair costs in Conway’s market right now:
| Service | Typical Range |
| Hinge adjustment or replacement | $180 – $280 |
| Post reset or replacement | $320 – $550 |
| Wood gate panel repair | $220 – $480 |
| Driveway gate operator repair | $280 – $480 |
| Gate motor replacement | $650 – $1,400 |
| Loop detector or safety device | $180 – $340 |
| Weld and rust repair | $240 – $520 |
These are the ranges we quote before work starts, not after. The final price depends on what we find when we open the gate up, but you’ll know that number before we touch a tool. Factors that move the needle: gate size and weight, accessibility for our welding equipment, whether the post footing has to be broken out and re-poured, and whether the motor is a standard 115V unit or a commercial 230V three-phase system. We also handle Gate Installation in Conway when repair isn’t economical, and we’ll tell you straight if that’s the case. Call (469) 530-2485 for a free written estimate.
We Also Serve Cities Near Conway
Our crews work throughout Central and South Florida, including Jacksonville, Miami, Tampa, and Orlando. Dispatch runs through our Miami office, and we coordinate local technicians to each market. If you’re outside Conway proper but within the Orlando metro, the same live-answer phone line and written-price guarantee apply.
Serving Conway, FL – Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Conway
Most Conway calls reach a technician the same day if you contact us before 3 PM, and next-day for later calls. We dispatch from our Miami office and route the nearest available crew to your address. Call (469) 530-2485 to check current availability.
Yes, we serve Conway proper, Conway Isles, the area around Lake Conway, and neighborhoods along Hoffner Avenue, Curry Ford Road, and Hiawassee Road. If your address shows Conway, FL, you’re in our service area.
Yes, our phones are staffed by a live person 24 hours a day, every day of the year, including holidays. We don’t use voicemail queues. For true emergencies, a gate stuck open that compromises security, we prioritize same-day dispatch even after hours.
Conway pricing sits in line with Orlando metro rates, slightly below Miami due to lower crew travel time from our dispatch point. The ranges we publish above are specific to what we quote in Conway, not a national average. Call (469) 530-2485 for an exact quote on your gate.
Every repair carries our 365-Day Done Right Promise in writing. If the same problem returns within a full year from the service date, we come back and fix it free of charge. No service fee, no parts markup, no argument. That’s The Garrison Standard, and it applies to every Conway job we complete.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Conway since 2008.