Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Irving
Gate repair in Irving usually means one of two things: a gate that won’t open, or a gate that won’t stay where it’s supposed to. Both are fixable, often the same day we hear from you. Carver Gate Repair sends background-checked, uniformed technicians to Irving homes and HOA communities, and every job starts with a written price before any work begins. We work on swing gates, slide gates, wood gates, and the operators that move them. If your gate is binding, sagging, stalling, or dead at the keypad, call us at (469) 530-2485 and a live person answers, day or night.
Why Carver Gate Repair Is Irving’s Preferred Gate Repair Company
Our Gate Repair team works Irving neighborhoods every week, from Las Colinas to Valley Ranch to the older subdivisions off Story Road. We know the equipment that Irving builders installed, which means we carry the parts that actually fail here rather than guessing. Technicians operate to The Garrison Standard: written prices, background-checked crews, and a 365-Day Done Right Promise on every repair, in writing. That guarantee covers a full year, and if a repair fails inside the guarantee window, the second visit is free. No argument, no service charge.
We don’t ask Irving homeowners to take our word for any of it. We hand you a written price before the work starts, so the number at the end of the job matches the number at the beginning. Dispatch is coordinated from the Dallas-Fort Worth area, and crews serve Irving directly. You’ll know who’s coming through your gate because the technician arrives in uniform and introduces themselves by name.
Wood Gate Repair in Irving
Wood Gate Repair in Irving calls for a different approach than metal gate work because the material moves with the seasons. Irving’s heat and occasional heavy rain cycles cause cedar and pine gate frames to swell, shrink, and eventually pull at the hardware. A wood gate that drags in August may have bound hinges in March too, and the fix isn’t always obvious to someone who doesn’t look at gate hardware daily. We typically see wood gate repairs in Irving run $180 to $420 depending on whether we’re re-hanging a leaf, replacing hinge posts, or straightening and reinforcing a frame that’s begun to rack.
Re-hanging and realignment
A sagging wood gate almost always traces back to one of three things: the hinge post leaning, the hinges themselves pulling loose, or the gate frame joints opening up. We re-set posts where possible, upgrade hinges to heavier hardware, and add diagonal bracing so the gate doesn’t start sagging again inside a season. The goal is a gate that swings level and latches without lifting.
Frame repair and rot treatment
Where wood has started to soften or split, we cut back to solid material and sister in new framing rather than trying to patch rot. The repair gets primed and painted or sealed to match. This matters in Irving because irrigation overspray against gate posts is common, and it continually wets the wood at ground level.
Driveway Gate Repair in Irving
Driveway Gate Repair in Irving usually involves an operator problem more often than a structural problem, especially in the planned communities that cover much of the city. A driveway gate that’s opening halfway and reversing usually points to a failing limit switch, a loop detector reading falsely, or a rack and pinion that’s worn from heavy daily cycling. Repair costs in Irving typically land between $220 and $650 for operator work, with full motor replacement running higher. Every quote is written and agreed before we open a single panel.
Operator diagnostics and repair
We start by listening to what the gate does and doesn’t do, then work through the control board, the limit settings, the safety inputs, and the drive mechanism. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, which covers nearly every system installed across Irving. Most repairs are completed in one visit because the problem is usually one component, not a mystery.
Safety system checks
Every automatic gate repair we finish includes a check of the entrapment protection. That means verifying photocells, edge sensors, and reversal force settings. Older operators in Irving’s early Las Colinas and Valley Ranch communities often lack current UL 325 protection, which is a serious safety matter and a code issue. We’ll flag it plainly and give you a written price to bring the system current.
Trusted Brands We Service in Irving
We service the gate motors already installed across Irving: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That list matters because a technician who only knows one brand will often blame the equipment instead of fixing the fault. We keep common boards, limit switches, loops, remotes, and photo eyes stocked for Irving customers so a repair doesn’t stretch out waiting on parts. If we’re working on a Viking or DoorKing operator on a Valley Ranch estate gate or a Ghost Controls system on a Las Colinas community entry, we’ve handled that exact model before.
Common Gate Repair Problems We See in Irving Homes
- Post footings shifting in expansive clay: Irving sits on soil that shrinks and swells with moisture, and gate posts set without deep concrete footings will lean within a few years. A leaning post makes a swing gate bind and a slide gate run off its track.
- Overworked HOA entry operators: Long shared driveways in Valley Ranch and Las Colinas mean one operator cycles dozens of times a day. Rack and pinion wear, blown capacitors, and failed keypads are routine consequences.
- Missing or bypassed safety edges: Older community-entry gates often lack working photocells or edge sensors. In some Irving HOA communities, these systems haven’t been updated since the original install, and a gate that reverses unexpectedly is usually an entrapment sensor failing.
- Wood gates pulling at hardware: Irving’s alternating hot-dry and wet periods cause wood frame joints to open up, which then strips hinge screws and throws the latch out of alignment. Tightening hardware without addressing the cause means another call in a few months.
Pricing for Gate Repair in Irving, TX
Most Irving gate repairs land between $180 and $650, depending on what’s actually wrong. A simple hinge re-set or keypad replacement stays at the lower end. A full operator replacement for a heavy slide gate can exceed $1,200 when the motor, board, and rack are all replaced. The difference is determined by what we find, and you’ll know the number before we turn a wrench. We write the price, we agree on the price, and the guarantee is on paper too. Call (469) 530-2485, describe what your gate is doing, and we’ll give you a straight answer about what it’ll cost in Irving.
We Also Serve Cities Near Irving
Along with our Irving coverage, our crews handle Gate Repair calls in Dallas, Balch Springs, Hutchins, and Mesquite. If your property sits on the edge of Irving or you own rental property in a nearby city, the same Garrison Standard applies: written prices, uniformed technicians, and a full-year written guarantee. Read more about our Gate Repair in Irving service area and how we cover the communities around it.
Serving Irving, TX – Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
A gate that stops halfway is usually an operator or safety sensor issue, not a footing problem, unless you can see the post leaning or the gate visibly binding. We start by checking the limit switch, the loop detector, and the safety photocells. In Irving, where clay soil does move post footings, we’ll also check whether the gate is binding at a specific point along its travel. Call (469) 530-2485 with the operator brand and behavior, and we’ll tell you what’s most likely before we arrive.
Yes. We service LiftMaster and FAAC operators throughout Irving, along with BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common replacement parts and boards on hand for Irving jobs, so most repairs are a single visit. If your operator is obsolete and parts are no longer made, we’ll give you a written price for a compatible replacement rather than leaving you with a dead gate.
Yes, in most cases a sagging wood gate can be repaired without full replacement. We re-hang the gate with heavier hardware, re-set or brace the hinge post, and reinforce the frame with diagonal bracing or sistered lumber where needed. Replacement is only worth discussing when the frame is rotten through in multiple areas or the gate is so racked that sections would need to be rebuilt. A typical wood gate re-hang in Irving runs $180 to $420.
Yes, UL 325 entrapment protection is required for automated gates under current standards, and many older Irving systems don’t meet it. Gates installed years ago in Las Colinas and Valley Ranch often lack working photocells or have edge sensors that were disconnected over time. We will not leave an automated gate operating without functioning entrapment protection, and we’ll provide a written price to bring the system into compliance.
Most driveway gate repairs in Irving take between one and three hours on site. That includes diagnostics, the repair itself, and a full test cycle with the safety systems. If we need a part that isn’t stocked on the truck, we schedule the return visit and hold to the original written price. Emergencies are answered around the clock at (469) 530-2485.
If your gate won’t open, won’t close, or is dragging and grinding, call Carver Gate Repair today at (469) 530-2485. We’ll diagnose the problem, write your price, and get your gate working on schedule.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Irving, TX.