Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lake Worth Beach
Gate repair in Lake Worth Beach runs $185 – $540 for most hinge, sag, and lock failures, and $650 – $1,400 when a motor or operator board replacement is involved. We dispatch background-checked, uniformed technicians to Lake Worth Beach neighborhoods like College Park, Mango Grove, and the South Ocean Boulevard corridor, usually within the same day for a stuck gate that can’t secure the property. Coastal salt air is rough on gate hardware here, and we carry marine-grade stainless fasteners on the truck because standard galvanized parts simply don’t hold up. If your gate is grinding, sagging, or dead at the keypad, call (469) 530-2485 and you’ll speak to a live person, not a queue.
Every job gets a written price before work starts. Not an estimate that grows after the hinge is cut open. The number you see is the number you pay. That’s the Garrison Standard, and it’s been the operating rule since 2008.
Why Carver Gate Repair Is Lake Worth Beach’s Preferred Gate Repair Company
Lake Worth Beach homeowners call us after they’ve already been burned once. A handyman said he could weld the sag out of a driveway gate, charged by the hour, and left the gate worse than he found it. Or a national franchise sent a tech who looked at the motor, quoted a replacement over the phone, and never followed up with a written number. That’s the pattern we hear most often from customers off Dixie Highway and Lake Worth Road.
Our Gate Repair team does one thing: gates. We don’t do fences, patios, or “general contracting.” That means the technician at your gate has already fixed your exact model dozens of times. He’s worked on DoorKing slide operators at commercial lots off Lake Worth Road. He’s rebuilt Viking arm assemblies on residential swing gates. He’s replaced Ghost Controls board components on solar openers. When he arrives, he knows what he’s looking at before the truck door closes.
Lonnie Burke leads the crew. He set the tone years ago: show up on time, keep the site clean, write the price down, and stand behind it for a full year. That’s not a mission statement. It’s how the job gets done.
Response time to Lake Worth Beach is typically same-day for anything that leaves the property unsecured. A gate stuck open means the pool enclosure, the backyard, the equipment cage, or the loading dock isn’t protected. We treat that as a priority, not a scheduling convenience. Calls are answered live, 24 hours a day, every day of the year. No voicemail. No call-back queue.
Commercial Gate Repair in Lake Worth Beach
Commercial Gate Repair in Lake Worth Beach covers slide gates, barrier arms, and swing gates on apartment complexes, marinas, contractor yards, and retail properties between Dixie Highway and the Lake Worth Lagoon. Salt air is hardest on these systems because gates run dozens of cycles a day, and a corroded limit switch or loop detector failure shuts the whole entry down. A commercial gate repair in Lake Worth Beach typically runs $330 – $890 for sensor and switch failures, and $900 – $2,400 for operator or motor replacement depending on the brand and duty cycle. We coordinate dispatch and scheduling from our South FL office in Miami, with crews serving Lake Worth Beach locally.
Apartment and HOA Gate Systems
Multifamily gates face constant cycle counts. Viking and DoorKing slide operators are common on Lake Worth Beach properties, and we stock the limit switches, loop detectors, and control boards those systems use. When an apartment gate stops responding to a keypad or clicker, 90% of the time it’s a failed edge sensor or a corroded terminal, not a dead motor. Replacing the whole operator first is a parts-sale, not a repair.
Marina, Warehouse, and Retail Gate Access
Commercial properties along the lagoon and downtown Lake Worth Beach deal with salt spray plus vehicle traffic. Slide gates plated with standard zinc hardware rust at the track and seizing the wheels within two years. We replace with 316 stainless and sealed enclosures. It costs more on the front end, and it’s the only fix that lasts on the coast. A commercial slide gate rehab usually runs $1,100 – $2,100 when tracks, wheels, and an operator board are involved.
Iron Gate Repair in Lake Worth Beach
Iron Gate Repair in Lake Worth Beach is a different trade inland than it is here. Waterfront properties on the barrier island and along South Ocean Boulevard get onshore salt breeze every afternoon. Iron gates rust from the inside out, rust-jacking at the welds, and the hinge post corrodes below the soil line. By the time the gate sags, the post is usually the problem, not the panel. A welded hinge repair on a Lake Worth Beach iron gate runs $185 – $400, and a full post replacement with re-welding and alignment runs $600 – $1,100 depending on access and gate weight.
Rust Repair and Structural Welding
Rust streaks on a gate are cosmetic. A sagging corner is structural. We don’t weld over rust-thinned steel; it burns through and the weld fails again within months. The correct repair is cutting out the rusted section, welding in a new plate or tube, and drilling matching drain holes so water doesn’t pool inside. Then it’s primed with a zinc-rich primer and painted with a marine-grade topcoat.
Hinge Post Replacement and Gate Realignment
A post that’s corroded from the inside out can’t be straightened by adjusting hinges. It needs to be dug out, replaced with new steel, set in concrete, and the gate re-hung level. On coastal lots, we use 316 stainless fasteners and galvanized posts. The gate should then be re-aligned so the latch catches without lifting and the operator isn’t fighting a sag that destroys the motor.
Trusted Brands We Service in Lake Worth Beach
Our technicians are trained on nine gate-motor brands, including Viking, Ghost Controls, DoorKing, and Elite. That matters in Lake Worth Beach because the right replacement part isn’t always sitting on a shelf at the supply house. We stock the local failure parts: Viking arm assemblies, DoorKing loop detectors, Ghost Controls control boards, Elite photo-eyes. When a motor fails, we match the replacement to the system already installed, not whatever brand the truck happens to carry. Every repair is backed by a written guarantee, good for a full year from the date of service.
Common Gate Repair Problems We See in Lake Worth Beach Homes
- Hinge posts corroded from the inside out. Salt spray works its way into the post through bolt holes and the top cap, then the post rots below ground where you can’t see it. The gate sags and the latch won’t line up no matter how much you adjust it.
- Operator control boards corroded by salt air humidity. LiftMaster and FAAC boards with open or poorly gasketed enclosures get green terminals and fail. Sealed enclosures with marine-grade gaskets prevent this. Standard enclosures don’t.
- Weld rust-jacking at hinge points. Iron gates rust at the weld seam where water sits, the rust expands, and the weld cracks. The gate then hangs from the remaining weld until that fails too.
- Entrapment protection sensor failures. Photo-eyes and edge sensors on gates near the Lagoon get salt film on the lenses and corrosion on the wiring. A gate that reverses randomly or won’t close usually has a failing sensor edge, not a bad motor.
Pricing for Gate Repair in Lake Worth Beach, FL
Here’s what gate repair in Lake Worth Beach actually costs, based on what we’ve quoted and completed in this market. Hinge and weld repairs run $185 – $400. Gate realignment runs $150 – $300 when the posts are sound. Lock and latch replacement runs $95 – $240. Operator boards for LiftMaster and FAAC units run $350 – $700 installed. Full motor replacement runs $650 – $1,400 for residential operators, and $900 – $2,400 on commercial slide and barrier systems. Coastal hardware upgrades to stainless fasteners and sealed enclosures add $80 – $220 on most repairs. Every price is written down before work starts, so the number never moves at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Lake Worth Beach
Beyond Lake Worth Beach, our crews serve Jacksonville, Miami, Tampa, and Orlando. No matter where the gate is, the same rules apply: written price before work, background-checked technicians, and a one-year written guarantee on every repair. If you’re outside Lake Worth Beach, the trip time changes but the standard doesn’t. See Gate Repair in Lake Worth Beach for local specifics.
Serving Lake Worth Beach, FL – Our Local Coverage Area
We’re based in the Lake Worth Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Worth Beach
Wellington and Royal Palm Beach sit inland, so their gates deal with heat and humidity but not salt. Lake Worth Beach gates on the barrier island and along the Lagoon get daily onshore salt breeze, which corrodes steel hinges and posts at two to three times the rate. Salt-loaded water works into bolt holes and weld seams, rust starts inside, and the hinge fails from within. Coastal repairs require marine-grade stainless fasteners and sealed hardware, which inland gates don’t need. If your gate is already sagging, call (469) 530-2485 and we’ll quote the repair before any work starts.
If the corner is sagging, welding over the rust won’t hold. The failed section has to be cut out, a new plate or tube welded in, and the post checked for internal corrosion. Rust streaks alone are cosmetic and can be sanded and recoated. A sagging corner means the steel has thinned and the weld has cracked from rust-jacking. We quote the full repair in writing before starting, and the weld work is guaranteed for a year. Call (469) 530-2485 and we’ll look at it.
Yes. Automatic gates in Lake Worth Beach must meet UL 325 entrapment protection standards, which means working photo-eyes or contact edges that reverse the gate if someone or something is in the path. Salt film on photo-eye lenses and corrosion on edge sensor wiring causes false reversals and failures. A gate that reverses randomly or won’t stay closed usually has a failing sensor edge, not a dead motor. We test and replace entrapment protection on every automatic gate repair, and we quote the cost before work starts.
We service DoorKing, Viking, Elite, LiftMaster, FAAC, BFT, Linear, and Ghost Controls operators on commercial properties in and around downtown Lake Worth Beach. DoorKing and Viking are the most common slide and barrier operators in the area, and we stock their control boards, loop detectors, and edge sensors on the truck. If a commercial gate is down, call (469) 530-2485 and a live person will schedule the call.
Solar gate openers near the coast fail faster because salt air corrodes the control board terminals inside the housing, and the battery terminals lose contact as corrosion builds. The panel itself holds up fine, but the electronics don’t. Sealing the housing with a marine-grade gasket and using dielectric grease on the terminals extends the life. If your solar opener is dead or intermittent on a Lake Worth Beach driveway gate, the board and battery terminals are the usual culprits. Call (469) 530-2485 for a quote.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Lake Worth Beach under the Garrison Standard since 2008.