Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lauderdale-by-the-Sea
Gate repair in Lauderdale-by-the-Sea typically runs $180 – $650 depending on the damage, and most calls are completed same-day when you reach us before early afternoon. Our dispatch team operates out of Carver’s Miami (South FL) office, with crews already working throughout Broward County and ready to route to Lauderdale-by-the-Sea properties on short notice. Salt air from the Atlantic, hurricane-season moisture, and the town’s mix of mid-century and newer construction all wear on gates differently here than inland, and we’ve learned those patterns over years of working this coastline. Call (469) 530-2485 and a live person picks up, 24 hours a day, including weekends and holidays. We’ll give you a written price before any work starts, and every repair carries our 365-Day Done Right Promise.
Why Carver Gate Repair Is Lauderdale-by-the-Sea’s Preferred Gate Repair Company
We’ve built our reputation in Lauderdale-by-the-Sea on showing up when we say we will and leaving the site cleaner than we found it. That’s The Garrison Standard, and it’s how we’ve operated since 2008.
Our technicians are background-checked and uniformed, so you know exactly who you’re letting through your gate. No independent contractors, no unmarked vans, no surprises about who’s on your property.
We answer calls with a live person around the clock, every day of the year. No voicemail boxes, no call-back queues, no waiting until Monday morning while your gate hangs open or won’t budge.
Every repair comes with a written price agreed before work starts and a written guarantee good for a full year. If something fails inside that window, we come back free of charge, no argument. That’s not an upsell, it’s how Carver Gate Repair works.
Wrought Iron Gate Repair in Lauderdale-by-the-Sea
Wrought Iron Gate Repair in Lauderdale-by-the-Sea addresses the corrosion and weld failures that salt-laden Atlantic air accelerates on decorative and security gates throughout town. We see this work most often on the ornate entry gates common along the side streets between A1A and the Intracoastal, where ironwork has been a signature of the architecture since the town’s earlier decades. A typical wrought iron repair in Lauderdale-by-the-Sea runs $220 – $480 for weld and rust remediation, hinge replacement, or section rebuilding; full panel replacement on larger estate gates can reach $650 – $1,200 depending on fabrication complexity.
Rust Damage and Weld Restoration
Surface rust on wrought iron isn’t just cosmetic in Lauderdale-by-the-Sea’s climate, it eats through material faster than inland locations because salt particles cling to damp metal year-round. We grind to clean metal, weld in replacement sections where pitting has compromised strength, and apply marine-grade primer and finish coating rated for coastal exposure.
Hinge and Post Fatigue
Heavy iron gates stress their hinges and posts over time, especially where coral-rock soil conditions make proper post-setting more demanding. We assess whether the post itself has shifted or the hinge hardware has worn, then recommend repair or replacement with the approach that lasts.
Metal Gate Repair in Lauderdale-by-the-Sea
Metal Gate Repair in Lauderdale-by-the-Sea covers aluminum, steel, and mixed-material gates that have bent, seized, or suffered motor-mount failure. These gates dominate the newer construction around the northern reaches of town and the commercial properties along Commercial Boulevard, where clean lines and low maintenance are priorities. Typical metal gate repair in Lauderdale-by-the-Sea costs $180 – $420 for track realignment, roller replacement, or panel straightening; operator re-mounting or structural reinforcement runs $350 – $650.
Track and Roller Seizure
Sliding metal gates jam when rollers corrode or tracks collect debris and salt residue. We disassemble the running gear, replace worn rollers with sealed-bearing units rated for coastal environments, and re-level the track to prevent recurrence.
Panel Impact and Alignment
Vehicle contact, storm debris, or gradual settling can throw a metal gate out of square so it drags, binds, or over-travels its limits. We measure the frame diagonally, heat-straighten or replace bent members, and reset limit switches so the gate stops exactly where it should.
Trusted Brands We Service in Lauderdale-by-the-Sea
Our Gate Repair team trains on and stocks parts for nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Lauderdale-by-the-Sea customers, that means we’re not ordering parts from a warehouse three states away and making you wait. We carry common Linear and Viking control boards, Ghost Controls battery kits, and DoorKing loop detectors on our trucks, so most motor repairs finish in one visit. If your system is one of the older FAAC or BFT units common in the town’s original estate homes, we know those legacy boards and can source replacements without guessing. The right part, the right know-how, and a written guarantee on the repair.
Common Gate Repair Problems We See in Lauderdale-by-the-Sea Homes
- Salt corrosion on limit switches and control enclosures. The ocean breeze carries salt inland farther than most homeowners expect, and it settles inside motor housings and on circuit boards. We see failed limit switches and corroded terminal blocks on gates within blocks of the beach, often before the equipment has reached half its rated service life.
- Hurricane-season water intrusion in underground loops and conduit. Summer storms saturate the ground quickly in Lauderdale-by-the-Sea’s low-lying areas, and water finds its way into loop detector wiring or low-voltage conduit. The gate opens randomly, refuses to close, or throws a fault code that points to the wrong problem until a technician traces the actual moisture path.
- Swing gate post settling in coral-rock substrate. The shallow, rocky soil throughout much of Broward County doesn’t grip concrete footings the way denser soils do. Posts lean gradually, gates drag, and hinges bind until we reset or re-core the footing with the right depth and diameter for the gate’s weight and wind load.
- Automatic gate safety sensor misalignment from heat and vibration. Photoelectric eyes and edge sensors shift slightly over months of sun exposure and daily cycling, especially on the busy vacation-rental properties near the beach. We realign, clean, and test to code, then document the safety check in writing.
Pricing for Gate Repair in Lauderdale-by-the-Sea, FL
We believe you should know what gate repair costs before you pick up the phone, so here’s what we typically see in the Lauderdale-by-the-Sea market:
| Service | Typical Range in Lauderdale-by-the-Sea |
|---|---|
| Hinge and post repair | $180 – $320 |
| Gate realignment and track work | $200 – $380 |
| Lock and latch repair | $150 – $280 |
| Weld and rust repair (wrought iron) | $220 – $480 |
| Motor diagnostics and repair | $280 – $550 |
| Full operator replacement | $650 – $1,400 |
What moves the number: gate size and weight, material type, accessibility for our welding equipment, whether the post needs re-setting, and whether the motor is a standard model or a legacy unit requiring special-order parts. We diagnose on-site, present a written price, and get your approval before any work begins. The price we write is the price you pay. Estimates are free, and there’s no charge for us to come look.
We Also Serve Cities Near Lauderdale-by-the-Sea
Our crews work throughout South Florida and across the state. If you’re outside Lauderdale-by-the-Sea, we also dispatch to Lauderdale-by-the-Sea neighboring areas including Jacksonville, Miami, Tampa, and Orlando. Each location operates to The Garrison Standard with the same written pricing, background-checked technicians, and 365-Day Done Right Promise. If you need Gate Installation in Lauderdale-by-the-Sea or Gate Motor Repair in Lauderdale-by-the-Sea, we handle those too.
Serving Lauderdale-by-the-Sea, FL – Our Local Coverage Area
We’re based in the Lauderdale-by-the-Sea area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lauderdale-by-the-Sea
Most Lauderdale-by-the-Sea calls booked before 2 p.m. receive same-day service, and emergency calls get prioritized in the dispatch queue. Our Miami (South FL) office coordinates routing throughout Broward County, so we’re rarely more than 30 – 45 minutes from properties in town. Call (469) 530-2485 and a live person will give you the next available window.
Yes, we work throughout Lauderdale-by-the-Sea from the oceanfront properties along El Mar Drive to the inland homes near the Intracoastal Waterway and Commercial Boulevard corridor. No neighborhood is outside our service area.
Yes, our phones are staffed by a live person 24 hours a day, 7 days a week, every day of the year including holidays. If your gate is stuck open, stuck closed, or creating a safety hazard, we’ll dispatch a technician as quickly as routing allows.
Pricing in Lauderdale-by-the-Sea falls within the same South Florida range we see in Miami and Fort Lauderdale, typically $180 – $650 for most repairs. Labor rates are comparable across the metro area, though beachfront properties sometimes require additional corrosion protection or access planning that can nudge the total slightly higher.
Every repair carries our 365-Day Done Right Promise, a written guarantee good for a full year from the date of service. If the same problem recurs or our repair fails within that window, we return and fix it free of charge, no argument. That’s not an extended warranty you buy, it’s standard on every job we do. Call (469) 530-2485 with your invoice date and we’ll schedule the follow-up.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Lauderdale-by-the-Sea as part of the Garrison Partners family since 2008.