Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Highlands
Gate repair in North Highlands, CA typically runs $180 – $340 for common fixes like hinge adjustments, wheel replacements, and limit switch work, while full operator replacements start around $850 and climb from there. Most repairs on swing and slide gates take two to four hours once our tech is on site. We answer the phone live, every time, and dispatch crews to North Highlands from our Sacramento coordination office, with technicians who know the difference between a Watt Avenue property and a Larchmont Drive half-acre. Call (469) 530-2485 when a gate stops acting right.
Why Carver Gate Repair Is North Highlands’s Preferred Gate Repair Company
North Highlands homeowners tend to call us after another company has already disappointed them. The garage-door outfit that said they could “probably” handle a gate. The handyman who tightened a hinge and left. The estimate that changed when the job was already open. We run on a different rule. Gate Repair is all we do, and every job gets a written price before work starts, a background-checked uniformed technician, and a written guarantee good for a full year. That’s The Garrison Standard, and it’s been how Carver Gate Repair operates since 2008 as part of the Garrison Partners family.
Our crews work the whole North Highlands grid, from the older blocks off Walerga Road to the newer infill around McClellan. When a gate fails on a Friday evening, you’re not waiting until Monday. A real person answers the phone 24/7, takes the address, and gets a tech scheduled. Lonnie Burke runs our operation with one standing order: the number quoted is the number billed, and the site is left cleaner than we found it.
Wrought Iron Gate Repair in North Highlands
Wrought iron gate repair in North Highlands is one of the most common calls we take, and the work usually comes down to three things: the hinge post, the gate panel, or the operator. Most wrought iron gates in this area are swing gates mounted on posts set into soil that shifts with the seasons. A gate that drags on one corner often looks like a panel problem. It’s usually a post that has moved. Fixing the panel without resetting the post is a waste of your money and ours.
Hinge Post Reset and Gate Re-Hang
When a wrought iron gate sags on one side, we check plumb on the hinge post before touching the panel. In North Highlands, our crews regularly pull posts that have tilted a quarter inch or more in the dirt. We cut the old bolts, pull the post, set a new concrete footing, and re-hang the gate so it swings level and latches clean. Hinge post resets on this side of Sacramento County typically run $260 – $480 depending on post size and footing conditions.
Rust Repair and Weld Work on Iron Gates
Wrought iron gates on older North Highlands properties pick up rust at the bottom rail and around scroll work where water sits. Our techs grind out failing welds, repair or replace rotted sections, and repaint the repaired area to match. Weld and rust repair on a typical ornamental gate runs $180 – $320 per section, less when caught early, more when the lower rail has gone soft. We tell you the range before we start, in writing.
Metal Gate Repair in North Highlands
Metal gate repair in North Highlands covers a lot of ground: tubular steel driveway gates, chain-link swing gates, aluminum slide gates, and the welded steel frames that carry them. The frame is structural. The operator is mechanical. The safety edge is electrical. A repair that addresses one and ignores the other two will fail again, which is why our techs check the whole system on every call, not just the part that stopped working.
Slide Gate Track and Rack Repair
Slide gates on North Highlands driveways fail most often at the rack and pinion, where the drive gear meets the rack on the gate panel. Wear here strips teeth slowly, and seasonal temperature swings speed it up. A gate that stalls mid-travel, shudders, or makes a grinding noise at one spot on the track usually has a worn rack section. We replace the section, re-set the pinion lash, and test the gate under load. Rack and pinion work starts around $240 and most full sections land between $300 and $550.
Gate Realignment and Roller Replacement
Metal gates that suddenly drag or bind usually have a bearing issue or a post that’s moved. On slide gates, the rollers wear at different rates, and a gate that ran true for years starts chewing into the track. We re-shim or replace the roller assemblies, square the panel, and set the stops so the gate closes clean. Realignment work in North Highlands typically runs $160 – $300 depending on access and how far the gate has drifted.
Trusted Brands We Service in North Highlands
We work on the equipment already installed on North Highlands properties, not just the brands we sell. Our technicians are trained on FAAC swing operators, BFT control boards, Linear and LiftMaster arm operators, and Viking slide operators, among others. That means when a BFT board throws a limit fault on a gate off Walerga Road, we’re carrying the right diagnostic approach and the right parts approach on the first visit. North Highlands customers get a tech who knows the machine in front of them, not someone seeing the brand for the first time.
Common Gate Repair Problems We See in North Highlands Homes
- Sagging swing gates where the hinge post has shifted in the soil. North Highlands has a patchwork of soil types, even from one block to the next. Replacing a panel without addressing the post means the same gate fails again in a season or two.
- Buried or undersized loop detector wire on long driveways. Older half-acre properties often have loop wire that was installed shallow decades ago. The operator misses vehicles, holds open unexpectedly, or cycles for no reason. We test the loop before swapping the board.
- Worn rack and pinion on slide gates. Temperature swings between Sacramento Valley summers and North Highlands winters stress the rack teeth on slide gates. Stripped teeth stall the gate mid-travel. This is a mechanical repair, not an electrical one.
- Operator arm failures on wrought iron swing gates. When the gate itself is heavy and the arm has been working against a sagging post, the operator fails early. We fix the post, then replace the arm. Do it the other way and the new arm won’t last.
Pricing for Gate Repair in North Highlands, CA
Here are the numbers we quote most often in North Highlands. Hinge and latch repair: $140 – $220. Roller replacement on a slide gate: $180 – $300. Photocell or safety edge replacement: $120 – $240. Limit switch adjustment or replacement: $110 – $190. Full operator replacement including labor: $850 – $1,600 depending on brand and gate weight. Weld and rust repair on a wrought iron gate: $180 – $320 per section. A complete new gate installation, including groundworks, concrete, operator, safety devices, and testing: $2,400 – $6,500 depending on gate type, length, and power run. Every quote is written before work begins, and the price does not move unless the scope changes and you approve it first. Call (469) 530-2485 for a free estimate.
One Soil Problem That Shows Up Everywhere in North Highlands
North Highlands’ mix of older half-acre parcels and newer infill lots means gate work here swings between reviving tired wrought-iron swing gates on established properties and installing new slide gates on tight driveways. Because lots and soil conditions vary block to block, a proper installation must be judged on its own groundworks and power plan, not a one-size template. On a half-acre property off Larchmont Drive, we took on a wrought-iron swing gate that dragged and stuck halfway open. The real problem wasn’t the panel. The hinge post had shifted in the soil, so our tech pulled the old post footing, set a new concrete footing, re-hung the gate, and replaced the worn LiftMaster operator arm. We then re-aimed the safety photocell and ran a full reversal test before calling the job done. That’s the difference between treating a symptom and fixing the gate.
We Also Serve Cities Near North Highlands
Our crews serve North Highlands and the surrounding communities, including Antelope, Carmichael, Rio Linda, and Elverta. If you’re just outside the North Highlands border, call us anyway. We’ll get you scheduled with a tech who knows this side of the county. Gate Repair in North Highlands coverage extends to the full service area our customers live in.
Serving North Highlands, CA – Our Local Coverage Area
We’re based in the North Highlands area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Highlands
In North Highlands, it’s usually the post. Our soil expands and contracts with the wet and dry seasons, and hinge posts set without enough concrete or depth move over time. We check the post first. If the post is true, we look at worn hinge bushings or a bent panel. If the post moved, we reset it before addressing the gate. You can check the gap between the gate and the post, a widening gap at the top hinge often means the post has tilted. Call (469) 530-2485 and we’ll come check it properly.
Yes. We repair and install both swing and slide gates across North Highlands, from wrought iron swing gates on older half-acre properties to chain-link and ornamental slide gates on newer infill lots. The two gate types fail differently, swing gates wear at the hinges and posts, slide gates wear at the rollers and rack. Our techs are trained on both, and we carry parts for FAAC, BFT, Linear, Viking, and LiftMaster operators.
When the operator motor runs but the gate doesn’t move, the most common cause in North Highlands is a stripped drive gear or worn rack and pinion on a slide gate, or a broken or detached arm on a swing gate. It can also be a shear pin that’s failed, which is actually a designed failure point to protect the operator. We diagnose the mechanical side before assuming the board or motor is bad. Most of these repairs run $180 – $400 and are done same day. Call (469) 530-2485 for a written quote.
Yes. We install gate operators, safety photocells, safety edges, and loop detectors on both new and existing gates in North Highlands. A safe installation includes the power run, proper grounding, a tested safety edge on the closing edge, photocell placement that prevents entrapment, and a full reversal test under load. We do not shortcut the safety devices to save money. Installation pricing depends on the gate type and power run distance, but a complete operator and safety package typically runs $1,200 – $2,800 installed.
Most repairs take two to four hours on site. A hinge post reset takes longer because the new concrete footing needs to cure, the gate is re-hung the same day and temporarily supported, but we tell you when it’s safe to run the operator again. A full new gate installation runs one to three days depending on the gate type, groundworks, and whether we’re pulling new power. We schedule installations, we don’t rush them. That’s how the gate lasts. Call (469) 530-2485 for a free estimate and a straight answer on timing.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving North Highlands, CA and the surrounding communities.