Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antelope
If your gate won’t open, sags on its hinges, or grinds against the post every time the motor cycles, you need a technician who understands what Antelope’s soil does to gate hardware. Our crews work on driveway gates across Antelope every week, from the established lots along Walerga Road to newer subdivisions north of Elverta Road. The clay under this part of Sacramento County expands and contracts with every dry spell and rain cycle, and that movement is the root cause of most gate failures we diagnose here. Call (469) 530-2485 and we’ll send a background-checked technician who gives you a written price before any work starts.
Why Carver Gate Repair Is Antelope’s Preferred Gate Repair Company
Homeowners in Antelope call us because they’ve already dealt with the alternative: a general contractor who shows up late, quotes one number, and hands over an invoice for something else. We operate to The Garrison Standard. Every repair gets a written price before the work begins, every technician is background-checked and uniformed, and every job carries a 365-day written guarantee. If the repair fails inside that window, the second visit is free. No argument, no re-quote.
Our dispatchers answer the phone around the clock. When a gate fails on a triple-digit afternoon in Antelope and your driveway is suddenly open to the street, you reach a live person, not a voicemail queue. Lonnie Burke leads our team, and he built the crew around one rule: the number on the quote is the number on the invoice. That holds whether we’re replacing a hinge bracket in Antelope or resetting a swing operator on the other side of the county.
Response time to Antelope is typically same-day for repair calls. We keep the common failure parts in local stock: hinge brackets, limit switches, photocells, and motor capacitors for the brands we service. When we say we can fix it today, we have the parts to back that up.
Driveway Gate Repair in Antelope
Driveway Gate Repair in Antelope starts with finding out why the gate stopped behaving, not just swapping parts until something works. Most driveway gates here are swing gates mounted on steel posts set into Antelope’s clay-heavy soil. When the ground shifts, the post tilts. The gate drops. The motor strains. The fix that lasts is the one that addresses the post footing first, then the gate leaf, then the operator. A typical driveway gate repair in Antelope runs $180 to $480 depending on what’s actually failed. Post resetting and re-footing work runs higher, usually $600 to $1,400, because it involves digging, concrete, and re-leveling the gate leaf.
Hinge and Post Work
When a gate sags in Antelope, the hinge post is usually the culprit. Expansive clay soil heaves with moisture and shrinks in the dry heat. Over a few seasons, that repeated movement works a post loose. We pull the post, drill or dig a deeper footing, set it in concrete rated for soil movement, and re-hang the gate so it clears the ground and closes square against the stops.
Operator Diagnostics and Limit Resets
Sometimes the gate panel is fine and the post is plumb, but the operator has lost its travel limits or burned out a capacitor. We test the motor under load, check voltage at the board, and reset limits so the gate opens fully and closes without slamming. If the operator is past saving, we quote a replacement matched to the existing mounting and brand.
Gate Welding in Antelope
Gate Welding in Antelope matters because steel gates here live in a brutal environment. Triple-digit summers bake the finish, winter rain seeps into joints, and the constant soil movement puts stress on weld points. We weld cracked hinge brackets, split rails, and broken pickets on site. Mobile welding rigs let us do the work at your property without hauling the gate to a shop. Typical weld repair on a driveway gate in Antelope runs $150 to $450, depending on the extent of the cracking and the thickness of the steel. A full hinge post rebuild with welded reinforcement runs $400 to $900.
Rust Repair and Reinforcement
Bottom rails that sit close to sprinkler overspray collect moisture against the steel. We grind back the rust, weld in new stock where the metal has thinned, and coat the repair so it doesn’t fail again in the next wet season. If the rust has compromised the structural integrity of a rail, we’d rather replace the section than weld over a problem.
Cracked Brackets and Hinge Tabs
Hinge tabs crack from years of the gate’s weight working against shifting posts. A cracked tab isn’t a cosmetic issue: it changes the gate’s swing geometry and overloads the operator. We cut out the old tab, weld in a new one, and re-hang the gate so the load sits properly on the hinge instead of the weld.
Trusted Brands We Service in Antelope
Our technicians are trained on the gate operators most common in Antelope driveways, including FAAC, BFT, Linear, and Viking equipment. We stock common control boards, remotes, photocells, and limit switches for these systems so a repair call doesn’t turn into a week of waiting on parts. When a FAAC board fails or a Linear arm strips a gear, the parts we need are usually in our local inventory. That means faster turnaround and a written price that holds.
Every repair carries the same 365-Day Done Right Promise regardless of brand. If a FAAC limit switch we installed fails within a year, we come back and replace it at no charge. That’s the guarantee, in writing, on every single job.
Common Gate Repair Problems We See in Antelope Homes
- Sagging gates from shifted hinge posts. Antelope’s clay soil expands and contracts dramatically between the wet winter and the 100°F summer. Posts that weren’t set deep enough will heave, and the gate drops with them. Fixing the panel without fixing the footing just means you’ll be calling again next season.
- Operators that overheat in summer. On days above 100°F, older operators can thermally trip or fail outright. Voltage sag from the long wire runs to the gate makes it worse. We check the circuit and the motor temperature rating before condemning a unit.
- Safety photocells that go out of alignment. When the gate or post shifts, the photo eye beams no longer line up. Under UL 325, a gate operator with non-functioning safety devices is a code violation. We realign or replace them so the gate reverses properly if anything crosses its path.
- Hinge welds cracking at the attachment point. The repeated micro-movement of a gate leaf against a shifting post fatigues the weld. What starts as a hairline crack turns into a hinge that tears loose. Weld repair is far cheaper than replacing the gate leaf, and it restores the original geometry.
Pricing for Gate Repair in Antelope, CA
Most gate repairs in Antelope fall between $180 and $700. A limit switch replacement or photocell realignment sits at the low end. A hinge post reset or a welded bracket rebuild lands in the $400 to $900 range. Full operator replacement, including the new motor and control board, typically runs $800 to $1,800 depending on the brand and whether we’re reusing existing mounting hardware. You’ll get a written price before we touch the gate, and that price doesn’t move when the job is open. Call (469) 530-2485 for a free estimate on any gate repair in Antelope.
We Also Serve Cities Near Antelope
Our crews cover Antelope and the surrounding communities including North Highlands, Elverta, Rio Linda, and Citrus Heights. If you’re just outside Antelope proper, you’re still inside our service area. For full details on coverage and what to expect, see our Gate Repair service page or Gate Repair in Antelope city overview.
Serving Antelope, CA – Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antelope
Because the post footing wasn’t addressed the first time. A previous repair likely just re-hung the gate on the same shifted post or tightened the hinge bolts, which buys a few months before the soil movement wins again. Antelope’s expansive clay heaves with rain and shrinks in summer heat, and unless the post is set deeper in a proper concrete footing, it will keep moving. We pull the post, dig a deeper hole, set it in the right concrete, and only then re-hang the gate. Call (469) 530-2485 if your gate has sagged more than once.
Yes. Under UL 325, which governs automatic gate operators, every system must have working safety devices: photocells at the travel area and a reversing edge or inherent entrapment protection on the motor. A gate operating without functional safety sensors is both a code violation and a liability. Homeowners insurance can deny a claim if an injury happens and the sensors were disabled or not aligned. We test every sensor on every call and replace failed units as part of the repair.
Not necessarily. Often the motor is fine and the problem is mechanical drag from a sagging gate, a seized hinge, or a misaligned track. The operator is working against too much resistance and either trips its clutch or overheats. We check the gate’s balance first, free up the hinges, and only then test the motor under load. In Antelope, where soil movement throws gates out of alignment regularly, this is one of the most common false alarms we diagnose.
Antelope gets excellent sun for solar, but triple-digit heat shortens battery life and can reduce panel efficiency. A solar setup works if the panel is sized correctly and the battery bank is rated for high temperatures. We install and service solar gate openers and can assess your specific exposure. For a free estimate and an assessment of your site, call (469) 530-2485.
Most driveway gate repairs in Antelope finish in two to four hours. Hinge bracket replacements, limit resets, and photocell realignments are routinely same-day jobs. Post resetting or major weld work can take longer depending on digging conditions and concrete cure time, but we’ll tell you the expected timeline and the written price before we start. Call (469) 530-2485 to schedule.
Call Carver Gate Repair for Gate Service in Antelope
The gate that keeps your driveway secure is only as good as the footing it stands on and the technician who fixes it. We don’t just swap parts. We find the actual failure, fix it the right way, and stand behind the work for a full year with a written guarantee. When you call (469) 530-2485, a live person answers, day or night. We’ll schedule a background-checked, uniformed technician to your Antelope property, give you a written price before the work starts, and leave the site clean when the job is done. That’s The Garrison Standard, and it’s how we work on every gate, every time.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Antelope and the surrounding Sacramento area.