Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Parker
Gate repair in Parker, TX typically costs between $180 and $650 depending on the problem, with most service calls completed in a single visit. Our dispatch team coordinates from our Dallas-Fort Worth office, and crews serving Parker carry parts for FAAC, BFT, Linear, and Viking systems so we don’t waste your afternoon driving back for hardware. Call (469) 530-2485 and a live person will pick up, 24 hours a day, including weekends and holidays.
Parker’s mix of newer ranch-style homes off Parker Road and established properties near the historic downtown means we see everything from sagging wrought-iron estate gates to automated driveway systems that have taken a beating from North Texas hail and summer heat. We’ve worked on gates along FM 2551, in the subdivisions near Allen Farm, and throughout the zip code 75002 area. The clay-heavy soil around Parker shifts with seasonal moisture changes, and that ground movement is hard on gate posts and hinges. We account for that when we realign a gate or reset a post so the fix lasts.
Our Gate Repair team operates to The Garrison Standard, which means a written price before any work starts, a background-checked and uniformed technician on every call, and a 365-Day Done Right Promise backed in writing. If the repair fails inside that year, we come back free. No argument, no re-diagnosis fee.
Why Carver Gate Repair Is Parker’s Preferred Gate Repair Company
We’ve built our reputation in Parker by showing up when we say we will and leaving the site clean. Homeowners here don’t have patience for no-shows or technicians who track mud through the driveway. Our crew knows the area, respects the property, and finishes the job without turning a simple hinge replacement into a multi-day project.
Response time to Parker is typically same-day or next-day for standard repairs. Emergency calls, where a gate is stuck open and the property is exposed, get priority dispatch. We don’t make you wait until Monday if your operator fails on a Saturday evening.
Every technician is background-checked and arrives in a marked Carver uniform. You’ll know who’s coming through your gate before they get there. That matters in Parker, where many homes sit on acre-plus lots and the gate is often the first and only security layer.
The Garrison Standard has governed every Carver location since 2008. Lonnie Burke leads this operation, and the same rules apply here that apply across the Garrison Partners family: written prices, written guarantees, and a live person on the phone around the clock.
Wrought Iron Gate Repair in Parker
Wrought Iron Gate Repair in Parker addresses the decorative and structural failures that come with age, weather exposure, and the occasional collision from a delivery truck or landscaping equipment. Most wrought iron repairs in this market run $280 – $550 for welding and rust remediation, with full section replacement climbing to $800 – $1,200 if the damage is extensive. Parker homeowners with iron gates near the older downtown corridor or along tree-lined stretches of Parker Road often call us when rust blooms at weld points or when scrollwork starts to separate from the frame.
Rust and Weld Restoration
We grind out rusted material, weld in fresh steel, and apply a primer and paint match that holds up to Parker’s sun and occasional ice events. A proper weld repair on a wrought iron gate should outlast the original factory joint if it’s done right.
Hinge and Latch Realignment
Iron gates are heavy. When the hinge pin wears or the post settles, the gate drags, stresses the frame, and eventually cracks at stress points. We reset posts in concrete rated for local soil conditions and swap to heavy-duty ball-bearing hinges that carry the load without binding.
Metal Gate Repair in Parker
Metal Gate Repair in Parker covers steel and aluminum driveway gates, including the welded tube-frame styles common in newer subdivisions and the industrial-grade systems guarding commercial properties near the U.S. 75 corridor. Typical metal gate repairs in Parker cost $180 – $420 for hinge work, post resetting, or panel straightening, with motor-mount repairs or track replacement adding $150 – $300 to the total. Aluminum gates resist rust but dent easily; steel holds up to impact but needs attention at weld seams after a few seasons of temperature swing.
Track and Roller Service
Sliding metal gates depend on a level track and rollers that haven’t flat-spotted. We replace worn v-groove or cantilever rollers, realign track sections, and check the gate’s travel path for obstructions. A gate that shudders or jumps the track is usually a roller or alignment issue, not a motor problem.
Frame Straightening and Reinforcement
When a metal gate frame bows from impact or repeated stress, we heat-straighten or section-replace depending on the damage. For aluminum gates, we use TIG welding with compatible filler rod so the repair doesn’t corrode at the joint six months later.
Trusted Brands We Service in Parker
Our technicians train on nine gate-motor brands, and we stock common parts for FAAC, BFT, Linear, and Viking systems at our Dallas-Fort Worth supply point. That local parts availability means Parker customers aren’t waiting a week for a control board or limit switch to ship from out of state. We also work on LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Whether your system uses an articulating arm for a swing gate or a slide operator with rack-and-pinion drive, we match the right components to the equipment already installed. For Gate Motor Repair in Parker, we carry replacement logic boards, loop detectors, and safety edge sensors on the truck.
Common Gate Repair Problems We See in Parker Homes
- Post lean from clay soil expansion. Parker’s black clay soil swells when wet and shrinks in drought, tilting gate posts and throwing off alignment. We set posts deeper than code minimum and use concrete rated for expansive soil so the gate stays plumb through seasonal cycles.
- Hail damage to operator housings and solar panels. North Texas spring storms dent operator covers and crack solar charging panels on gate systems. We inspect the housing seal and replace damaged components before water gets to the control board.
- Gate drag after foundation or landscaping work. When Parker homeowners add irrigation, regrade, or pour new concrete, the gate’s clearance changes by an inch or two. We adjust the hinge geometry or trim the gate bottom so it swings free without scraping.
- Corroded safety edges and photo eyes. Humid summers and sprinkler overspray degrade the rubber safety edges and cloud the lenses on photo-eye sensors. We replace these with weather-rated components and reposition sensors to avoid direct spray.
Pricing for Gate Repair in Parker, TX
Most gate repairs in Parker fall between $180 and $650. Hinge replacement or post resetting runs $180 – $320. Weld and rust repair on wrought iron starts around $280 and tops out near $550 for extensive work. Motor diagnostics and minor control repairs range $200 – $420, with full operator replacement climbing to $1,200 – $2,400 depending on brand and horsepower. Gate realignment, where we adjust the entire frame and hardware set, typically costs $240 – $380.
What moves the number: gate material and weight, accessibility of the work area, whether the post needs full replacement, and whether the motor system requires parts we don’t stock locally. We diagnose on-site, give you a written price before touching a tool, and you approve it or we leave. No charge for the estimate, and the price on the paper is the price on the invoice. For larger projects, we also handle Gate Installation in Parker with the same upfront pricing structure.
We Also Serve Cities Near Parker
Our crews work throughout the Dallas-Fort Worth metroplex and travel to Houston, San Antonio, Dallas, and Fort Worth for larger commercial and residential gate projects. If you’re searching for Gate Repair in Parker specifically, we dispatch locally and carry the parts inventory to match.
Serving Parker, TX – Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Parker
We typically arrive same-day or next-day for standard repairs in Parker, with emergency calls prioritized when a gate is stuck open and the property is unsecured. Call (469) 530-2485 for an exact arrival window; estimates are free.
We service the full Parker area including properties near Allen Farm, along Parker Road, off FM 2551, and throughout the 75002 zip code. Our dispatch team routes crews based on your location and the parts needed.
Yes, our phones are staffed by a live person 24 hours a day, 7 days a week, including weekends and holidays, and we dispatch emergency repairs when a gate failure creates a security or safety issue. Call (469) 530-2485 anytime.
Parker pricing is consistent with our broader DFW market rates; we don’t add a travel surcharge for Parker addresses. A hinge replacement or post reset costs the same in Parker as it does in Dallas, and our written price guarantee applies everywhere we work.
Every repair carries our 365-Day Done Right Promise in writing. If the same problem returns within a full year from the service date, we come back and fix it free, including parts and labor. No re-diagnosis fee, no argument. Call (469) 530-2485 to schedule a free estimate and get your written price before any work starts.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Parker and the Dallas-Fort Worth area to The Garrison Standard since 2008.