Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Paterson
Gate repair in Paterson means dealing with old post footings, narrow side yards, and gates that have been asked to hold up through decades of New Jersey freeze-thaw cycles. When a swing gate drags or an operator stops mid-cycle, the cause is usually structural, not electronic, and that’s the first thing we check. We answer the phone around the clock, quote a written price before any work starts, and our technicians arrive in uniform with the parts and tools to fix the problem on the first visit. Call (469) 530-2485 when the gate stops working, and a live person will pick up.
Why Carver Gate Repair Is Paterson’s Preferred Gate Repair Company
Paterson homeowners call Gate Repair teams after they’ve had someone else show up late, guess at a price, and leave without solving the actual problem. That’s the pattern we disrupt. Every Carver job runs on The Garrison Standard: a written price delivered before work begins, a background-checked and uniformed technician on-site, and a written guarantee on every repair, good for a full year. No exceptions, no upsells, no price movement at the door.
Paterson customers also know the difference between a generalist who says “I can probably fix that” and a gate specialist who opens the panel, reads the fault code, and tells you exactly what’s wrong in plain language. We work exclusively on gates and gate motor systems, and we’ve walked the alleys and driveways of the Eastside, Hillcrest, South Paterson, and Lakeview enough times to know what this housing stock demands. Dispatched from our New York City metro office, Gate Repair in Paterson crews reach most of the city within an hour for emergency calls.
Driveway Gate Repair in Paterson
Driveway gate repair in Paterson is rarely as simple as swapping a part. The city’s older two- and three-family homes often have narrow driveways along shared property lines, and many gates here are custom-fit swing gates, not standard kits. That means post footing placement and hinge alignment determine whether the gate clears the neighbor’s fence or slams into it. We approach every driveway gate job as a structural problem first and a mechanical problem second.
Hinge Post and Footing Work
A gate panel that drags or sags is usually telling you the hinge post has moved. Decades of runoff and freeze-thaw in Paterson can rot a wooden post at the base or crack the concrete footing it sits in. We dig out the old footing, reset the post in new concrete with the correct depth for the gate’s weight, and re-hang the panel so it swings clean and level.
Operator and Limit Correction
When a gate drags because the post shifted, the operator works harder every cycle. That extra load burns out motors and trips control boards over time. After we correct the structure, we adjust limit switches, re-check the auto-reverse sensitivity, and confirm the gate stops and returns properly at both ends of travel.
Gate Welding in Paterson
Gate welding in Paterson is the fix for broken hinges, cracked frame joints, and rusted bottom rails that keep snapping or scraping. Wrought iron and steel gates from the 1940s and 50s are common here, and they fail at the joints first. We cut out the cracked metal, weld in new steel, reinforce the hinge points, and grind the work flush so the repair is as strong as the original frame, not a patch that holds for a season.
Rust Repair and Reinforcement
A gate that sits close to the ground on a Paterson driveway collects road salt, puddle water, and dew. The bottom rail rots from the inside. We weld in new steel at the bottom rail, treat remaining surface rust, and often add gusset plates at the hinge corners to carry load better than the original design.
Breaking and Re-welding Stuck Hinges
If a hinge has seized and the gate won’t open fully, heat and leverage sometimes work, but welding is the permanent fix. We cut the old hinge barrel off the post and panel, true up the alignment, and weld new heavy-gauge hinges so the gate swings freely and closes square against the latch post.
Trusted Brands We Service in Paterson
Paterson gates run on a mix of older FAAC and BFT swing operators, LiftMaster units, and the occasional Linear or Viking install. Our technicians are trained on all of them, and we keep motor capacitors, limit switches, photocells, and receiver boards stocked for the brands most common in this area. That means a gate operator failure doesn’t turn into a three-day wait for a part. We diagnose the board, match the part to the system already installed, and get the gate back in service, whether it’s a BFT on a side yard in Lakeview or a FAAC on a two-family driveway off McBride Avenue.
Common Gate Repair Problems We See in Paterson Homes
- Hinge post rot and footing failure: Older Paterson driveways were often built with shallow post footings, and decades of rain and snowmelt have washed away the bearing soil. The panel gets blamed, but the post is the culprit, and resetting it in new concrete fixes the gate.
- Operator failure after repeated binding: A swing gate that drags because the hinge post shifted forces the operator to work harder on every cycle. The control board trips, or the motor burns out, and the operator gets replaced when the structure should have been corrected first.
- Safety photocell misalignment on narrow side-yard gates: With little clearance between the gate and the house or fence, a bumped or dirty photo-eye kills the auto-reverse. The gate stops mid-cycle and won’t respond, which is a simple realignment or cleaning fix.
- Rusted bottom rails and cracked weld joints: Road salt, standing water, and decades of use separate steel at the welds. We see this constantly on the older iron gates that front narrow driveways off Weasel Road and the numbered streets east of Park Avenue.
Pricing for Gate Repair in Paterson, NJ
A typical driveway gate repair in Paterson runs $180 to $340 when the problem is mechanical: a limit switch, a photocell, a receiver board, or a hinge adjustment. Hinge post resets that require digging, new concrete, and re-hanging the gate usually run $500 to $900 depending on footing depth and post size. Gate welding repairs run $150 to $450 for most cracked joints, rust reinforcement, or hinge replacement. Full gate operator replacement on a swing gate is typically $900 to $1,800 including the motor, arm, and setup. Every job gets a written price before any work begins, and that number is the number on the invoice. Call (469) 530-2485 and we’ll give you an exact quote over the phone, free.
We Also Serve Cities Near Paterson
Carver Gate Repair covers all of Paterson and reaches surrounding Passaic and Bergen County communities, including Paterson metro neighbors North Bergen, Union City, Newark, and Jersey City. If you’re just outside the city line and need gate service, call the same number and we’ll dispatch a technician to you.
Serving Paterson, NJ – Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paterson
The most common cause in Paterson is a misaligned safety photocell, often bumped when a car squeezes through a narrow side-yard gate. If both photo-eyes are clean and aligned, the next check is the limit switch, which tells the operator where the gate should stop. The third possibility is a dragging panel putting excessive load on the motor, which trips the internal overload and stops the gate mid-cycle. We diagnose all three and fix the actual fault, not the symptom. Call (469) 530-2485 and we’ll walk you through what’s happening, then send a technician if needed.
Yes, and we plan those installs around the tight setback, not around a catalog spec. A narrow side yard between a house and a fence often needs a custom-width swing gate, a compact operator mount, and careful hinge placement so the gate clears the neighbor’s property line without pinching a hand or catching a bumper. We measure the actual opening, check field conditions, and write a price that includes the exact work, delivered before any digging starts.
A proper automatic gate installation in Paterson includes setting the hinge posts in new concrete at the correct depth, hanging and aligning the gate panel, installing the operator and arm, running the low-voltage power feed, mounting and aligning the safety photocells, and testing the auto-reverse under load so the gate backs off when it meets resistance. We also leave the job site clean and hand you a written note on what was installed and when to re-check the posts. We do not promise same-day turnaround on an installation. This work is measured, ordered, and scheduled for the correct amount of time.
Often yes, provided the motor or control board hasn’t been completely burned out. The key is fixing the sag first. If you replace the operator without correcting the post or panel alignment, the new unit will fail the same way. We re-true the structure, check the operator’s internals and fault codes, and replace only what’s actually broken, then we run the gate through full open-close cycles to confirm it’s no longer binding. Call (469) 530-2485 for an exact quote, and remember the price is written and agreed before any work starts.
Most mechanical gate repairs in Paterson are done in 60 to 90 minutes on the first visit: limit switch adjustments, photocell realignment, receiver programming, hinge tightening. Post resets and welding work can take half a day or longer because concrete needs to cure before the gate is hung, and that’s the one time we schedule a return visit. We do offer same-day dispatch for many repairs, and we always tell you up front what the job will require before we send a technician.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Paterson with The Garrison Standard.