Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Reedley
Gate repair in Reedley usually comes down to one of two things: the gate itself is out of square, or the operator is fighting a gate it was never meant to move. Most calls we run in Reedley start with a sagging swing gate or a slide gate that’s started grinding. We dispatch technicians who know the difference between a footing problem and a motor problem, because in this part of the Central Valley, that distinction saves you real money. If your gate won’t open, drags on the ground, or trips its safety sensors, call (469) 530-2485 and we’ll give you a written price before any work begins.
Why Carver Gate Repair Is Reedley’s Preferred Gate Repair Company
We run every Reedley job to The Garrison Standard. That means a background-checked, uniformed technician shows up, diagnoses the gate, and hands you a written price before touching a single bolt. No estimate that grows once the job is open. No second visit charge if the repair fails inside the guarantee year. Reedley homeowners have dealt with enough no-shows and moving numbers. We don’t operate that way.
Our crews cover Reedley from the neighborhoods around Reedley College out to the ag parcels east of town along Manning Avenue. We know the housing stock here: mid-century ranch homes on expansive clay, newer stucco subdivisions, and agricultural properties with long driveway runs. That local read matters when a gate starts sagging. Reedley soil moves. Footings shift. Operators that worked fine for years suddenly bind. We check the post before we condemn the motor, because that’s the repair that actually holds.
Lonnie Burke runs our service operation, and the standard is simple: the repair is guaranteed in writing for a full year, and if it fails inside that window, we come back free. That’s not a promotion. It’s the baseline.
Commercial Gate Repair in Reedley
Commercial Gate Repair in Reedley covers the heavy-use equipment that runs on farms, packing houses, cold storage facilities, and industrial lots around the city. These gates cycle constantly, especially during stone fruit and table grape season, and a down gate stops trucks. Not a nuisance. A logistics problem.
Slide Gate Rack and Pinion Repair
Long driveways out toward the Kings River and along the agricultural outskirts chew through rack and pinion gear faster than most owners expect. When a slide gate starts jerking or making a popping sound, the rack is usually worn or sitting out of alignment. We replace rack sections, re-align chain or belt drive, and re-set limit switches so the gate stops where it’s supposed to instead of slamming the end post.
Operators, Loop Detectors, and Safety Edges
Commercial operators in Reedley need to hold up to dust, heat, and constant cycling. We service LiftMaster, DoorKing, and Viking slide and swing operators, replace loop detectors buried in the asphalt when they stop sensing truck traffic, and test photoelectric safety edges so an operator never closes on someone who’s still in the gate path. Expect a commercial slide gate repair in Reedley to run roughly $450 to $1,200 depending on the parts needed and how much of the rack or operator has to come out.
Iron Gate Repair in Reedley
Iron Gate Repair in Reedley starts with figuring out whether the gate frame itself is still true. Wrought iron and ornamental steel gates look sturdy, but they’re heavy, and when a hinge post moves, the whole gate starts to drag and twist. Weld repairs on the panel don’t fix a footing that’s rotated in the clay.
Hinge Post Reset and Sag Correction
Reedley sits on expansive clay that heaves with winter moisture and contracts in summer heat. That cycle slowly works hinge posts out of plumb. When a swing gate droops at the latch end, the operator has to push uphill every cycle. We re-set the post in fresh concrete, correct the sag, and re-hang the gate so the reveal stays consistent. A hinge post reset in Reedley typically runs $600 to $1,400 depending on whether we saw-cut and re-pour the footing or the post can be re-bedded in place.
Weld and Rust Repair
Open pickets and bottom rails take the worst of it on iron gates along rural roads where irrigation overspray and weed control chemicals hit the metal. We grind out rust, weld in replacement sections, and match the existing coating so the repair doesn’t stand out. It’s work that should be done before a hinge tears out of the frame entirely.
Trusted Brands We Service in Reedley
We work on the equipment Reedley homeowners and businesses actually have installed: Linear, Viking, Ghost Controls, and DoorKing, alongside LiftMaster and the rest of the major operators. That matters because parts availability is half of gate repair out here. We keep common boards, limit switches, and photocells on the truck for the brands we see most, so a Reedley repair doesn’t wait a week on a shipping delay. When you call, we match the right technician to the brand already sitting on your property. For more on what we cover across the board, see our Gate Repair page.
Common Gate Repair Problems We See in Reedley Homes
- Sagging swing gates from shifted hinge post footings. Reedley’s expansive clay moves with the seasons, and a gate that dragged all winter often levels out in summer. The fix is re-setting the post, not shimming the hinges.
- Slide gate rack wear on agricultural driveways. Harvest season means gates on the outskirts of Reedley cycle hundreds of times a day. Rack and pinion gears wear down and the gate starts to lurch or stall midway.
- Safety sensor failures that go unnoticed. Older gates around town predate current UL 325 entrapment requirements. A photocell that’s drifted out of alignment gets bypassed, and then the gate won’t reverse when it meets resistance. We test reversal on every repair.
- Solar operator batteries cooked by Central Valley heat. Rural parcels east of Reedley run a lot of solar gate openers, and the summer sun bakes batteries that sit in unshaded boxes. The gate works on cool mornings, then dies by afternoon when the board can’t hold a charge.
Pricing for Gate Repair in Reedley, CA
Gate repair in Reedley runs a wide range because a limit switch adjustment is not the same job as a footing replacement. A standard service call with a safety sensor adjustment or hinge tightening typically lands between $150 and $350. A board replacement on a Linear or Ghost Controls operator runs $350 to $700 with parts. A full hinge post reset on a swing gate, including concrete and re-hanging, sits at $600 to $1,400. Complete operator replacement with a new LiftMaster or DoorKing unit starts around $1,500 and climbs with the amount of groundworks and wiring needed. Every one of those numbers is quoted in writing before work starts, and the repair is guaranteed for a full year. Call (469) 530-2485 and we’ll come out, look at the gate, and hand you a firm price. Free estimate, no obligation.
We Also Serve Cities Near Reedley
Our Reedley crews regularly run to Reedley neighborhoods and the surrounding towns. We cover Parlier and Orange Cove to the east, Kingsburg to the south, and Selma to the west. Same crew, same written guarantee, same live phone line when you call.
Serving Reedley, CA – Our Local Coverage Area
We’re based in the Reedley area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reedley
More often in Reedley, it’s the gate, not the motor. The hinge post footing has usually shifted in the expansive clay, pulling the gate out of square so the operator has to push uphill. We saw exactly this at a home near Reedley College: a swing gate that dragged for months, a panel that had already been re-welded once, and a LiftMaster operator that was fighting a crooked hinge post the whole time. After re-setting the footing and correcting the sag, the gate cycled smoothly without touching the motor. Call (469) 530-2485 and we’ll check the post before anyone tells you to replace the operator.
Yes. A proper automatic operator installation in Reedley is measured, quoted, and scheduled, not knocked out in an afternoon. The job includes checking the gate’s weight and swing so the right operator goes in, trenching or surface-running power, mounting the operator and gate brackets, setting the limit switches, installing required safety edges or photocells, and running a full reversal test. Most residential installs take one to two days once equipment and materials are on hand. The price is written before we start, and it includes the groundworks and safety equipment. Call us for a free measure and written quote.
Yes. Any automatic gate operator installed or serviced in Reedley must meet UL 325 entrapment protection requirements, which means monitored photocells, contact edges, or an equivalent reversing mechanism. If your gate doesn’t reverse when it meets resistance, it’s not compliant and it’s not safe. We test reversal on every gate we touch, and we won’t leave a gate operational if the safety devices are bypassed or non-functional.
The highest-value maintenance for a slide gate out on the ag parcels around Reedley is rack and wheel service. Grease and dust build up during harvest months, the rack wears unevenly, and the gate starts popping or binding at the motor. We clean and re-lube the track, check chain or belt tension, inspect the rack for chip-out, and re-set the limit switches. A maintenance visit on a rural slide gate in Reedley runs $200 to $450 and prevents most mid-harvest failures. Call (469) 530-2485 to schedule a look before the next big push.
Yes. Solar gate openers on parcels east of Reedley sit in full sun with no shade, and the two failure points we see most are cooked batteries and charge controllers that quit. We test the panel output, check battery condition under load, and replace the board or batteries as needed so the gate isn’t dead every afternoon. A solar gate opener diagnostic in Reedley typically runs $150 to $250, and parts are quoted before installation.
Get a Written Price Before Any Work Starts in Reedley
If your gate is sagging, grinding, stuck, or refusing to reverse, call (469) 530-2485. We’ll put a background-checked, uniformed technician on it, diagnose the actual problem, and hand you a written price before any work starts. Every repair comes with a written one-year guarantee, and if it fails inside that year, we come back free. That’s how we’ve run gate repair since 2008, and it’s how every Reedley job gets done.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Reedley under The Garrison Standard.