Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hurst, TX
Gate work in Hurst comes down to two things: heat and soil movement. Most of the gates we service here sit on clay-heavy ground that shifts with every drought-and-deluge cycle, so posts lean and gates that once swung clean start dragging at the latch. Add summer temperatures that cook capacitor boards inside gate motors, and you get a market where repair calls spike hard in July and August. We handle gate repair, gate installation, and gate motor repair across Hurst with written pricing before any work begins. If you need a Hurst gate technician today, call (469) 530-2485.
Why Hurst Homes Are Different
Hurst housing stock runs older than a lot of the mid-cities neighbors. Much of the city was built between the 1950s and 1970s, and what that means for gate work is consistent: the original gates and openers were installed for a different era of hardware. Gate posts here are frequently set on shallow concrete footings that predate modern frost and movement standards. When the clay soil expands after spring rains, post blocks lift. When it bakes dry through a Fort Worth summer, the same posts settle back down a half inch in the other direction. Gates bind, latches misalign, and motors strain against the added load until a limit switch or gear strip fails. Any repair in Hurst that doesn’t account for soil movement will fail again inside two years. That’s the first thing we look at before quoting a board replacement or hinge repair.
HOA presence in Hurst is scattered, not universal. Some neighborhoods, especially the newer communities east of Precinct Line Road and around Hurst Hills, have covenants that dictate gate style, height, and color. If you’re in an HOA-governed section, we can help size the replacement against the written standards so you don’t pay for an install that gets flagged at approval. The city does require permits for new gate construction, and we handle that paperwork as part of any installation quote.
One more thing specific to Hurst: wind. We’re not in a tornado alley peak zone the way northern Tarrant County is, but the city sits open enough that storm season gusts regularly push swing gates past their wind stops. That’s a wear item most homeowners don’t know they have until the arm bends. When we see wind damage on a swing gate, we replace the gate hinge and wind-stop hardware as a pair, not one at a time.
Our Main Hurst Services
Most of the calls we take from Hurst homeowners start as a gate that won’t open or a gate that’s fallen out of alignment, and from there the work splits into three service lines, each with its own Hurst page below.
Gate Repair in Hurst
Repair work in Hurst is about the gate’s mechanical wear points: hinges, latch assemblies, wheel trucks on slide gates, and the steel frame itself where rust has taken hold. Driveway gates here that face north see less sun but more trapped moisture, and that’s where we find corrosion behind the powder coat. We repair what’s repairable and tell you honestly when a gate has reached the point where welding another patch onto a rusted frame is throwing money away. Every repair is quoted in writing before the first tool comes off the truck, and it’s backed for a full year under the 365-Day Done Right Promise. Full detail on the work we do is on the Gate Repair in Hurst page.
Gate Installation in Hurst
A new gate in Hurst is a measured job, not a same-day one. We spec the gate to the opening, order the steel, and schedule the install once the permit clears. Where soil movement is the known risk, we dig deeper than code minimum on the post holes and set the posts in full-footing concrete rather than the shallow blocks we find on almost every older Hurst home. Options include ornamental steel, wood, and driveway-style aluminum, with hardware matched to the brand of opener you run or plan to run. We measure, price, and permit the whole job up front so the number you approve is the number you pay. See the full scope on Gate Installation in Hurst.
Gate Motor Repair in Hurst
Motor work in Hurst runs heavily toward heat-failure diagnostics this time of year. Capacitors fail, boards cook, and gear boxes strip when a gate has been fighting a misaligned track for a full season. We work on LiftMaster, DoorKing, Viking, Linear, and several other brands so the fix matches the system already installed rather than forcing a generic board into a housing it wasn’t designed for. Every motor repair carries the same written one-year guarantee and free second visit if the repair fails inside the window. That’s the standard we run every motor job to, and the breakdown is on the Gate Motor Repair in Hurst page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hurst
Our technicians service and install Linear, Viking, Ghost Controls, and DoorKing equipment in Hurst, among several other motor lines. Because gate motors are what we do all day, every day, we keep the common failure parts on the truck: boards, capacitors, limit switches, and remotes for the brands Hurst homes actually run. See the full brand list on our brands page.
Pricing for Gate Company in Hurst, TX
| Service | Typical range in Hurst |
|---|---|
| Gate repair, minor (hinge, latch, wheel) | $120 – $280 |
| Gate repair, structural (post, frame weld) | $300 – $600 |
| Gate installation, single swing (basic) | $1,000 – $2,500 |
| Gate installation, slide gate | $1,500 – $3,500 |
| Gate installation, driveway ornamental | $2,000 – $5,000 |
| Gate motor replacement (standard swing) | $500 – $1,200 |
| Gate motor installation (new, complete) | $800 – $1,800 |
| Gate motor repair (board, capacitor, limit switch) | $100 – $350 |
| Loop detector replacement | $200 – $400 |
| Remote replacement / programming | $50 – $120 |
Prices in Hurst push higher when a gate has been misaligned long enough that the motor has to be replaced rather than repaired, and when soil movement means the posts need resetting before anything else will hold. Every quote you get from us on a Hurst job is written, delivered before work starts, and locked. The number doesn’t move at the door.
Neighborhoods We Serve in Hurst
We run jobs across the entire Hurst city footprint, from the older side streets off Pipeline Road up through the subdivisions around Hurst Hills and the newer construction east of Precinct Line Road. Typical dispatch time within Hurst is the same day for repair calls, and we route installation and motor work by measured appointment.
- Hurst Hills
- Bellaire Park North
- Precinct Line Road corridor
- Shady Oaks
- Midway Park area
Service Area – Cities Near Hurst
Our Hurst crews cover the surrounding mid-cities area for gate repair and installation, including North Richland Hills, TX, Bedford, TX, Colleyville, TX, and Haltom City, TX. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, with local technicians dispatched to all of those cities.
Serving Hurst, TX – Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hurst
Repair calls in Hurst typically get a same-day dispatch, because we keep technicians routed through the mid-cities area most weeks. Installation and motor work are scheduled by appointment with a measured quote and written price before anything is ordered. Call (469) 530-2485 to get an arrival window.
Yes, the City of Hurst requires a permit for new gate construction. We handle the permit paperwork as part of the installation quote, so you don’t have to file separately. HOA approval is separate where it applies, and we can help match the gate spec to your covenants. The written price covers the gate, the install, and the permit.
Every repair we make in Hurst comes with a written 365-Day Done Right Promise. If the repair fails inside the full year from the date of service, we return and make it right at no charge. That’s in writing on the job sheet before we start, and it isn’t an upsell.
If your gate is misbehaving in Hurst, call (469) 530-2485 for a written estimate and a real person on the line, 24 hours a day.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hurst Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.