Gate Repair in Hurst - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Hurst

Gate repair in Hurst typically runs $140 to $680 depending on the failure, and most service calls are completed in a single visit. We dispatch ready-to-work technicians from our Dallas-Fort Worth office to Hurst neighborhoods every day, with a written price agreed before any work begins. A sagging wooden gate on Norwood Drive is a different job than a slide gate fault off Precinct Line Road, and we treat them that way. If you need a gate fixed in Hurst, call (469) 530-2485. Lonnie Burke leads our crew, and the same Garrison Standard applies on every call: written prices, background-checked technicians, and a full year of written guarantee on the repair.

Call (469) 530-2485

Why Carver Gate Repair Is Hurst’s Preferred Gate Repair Company

Hurst homeowners tend to be direct about what they want: a gate that opens and closes without a fight, a price that does not move at the door, and a technician who shows up when they say they will. That is the whole reason Carver Gate Repair exists. Every Hurst call gets a written price before tools come off the truck, and every repair carries the 365-Day Done Right Promise. If the repair fails inside the guarantee window, we return and fix it free. No charge, no argument.

Our Gate Repair team works on wooden and metal gates across Hurst, but the local reputation is built on showing up. Phones are answered by a live person 24 hours a day, seven days a week, including weekends and holidays. No voicemail boxes, no callback queues. The responding technician is background-checked and uniformed, so when someone arrives at your gate, you know exactly who you are letting through it. That matters to Hurst homeowners who have already been burned by a no-show or a moving price.

The local knowledge runs deeper than scheduling. We know the ranch corridors off Bedford-Euless Road, the mid-century lots along Norwood Drive, and the newer construction near Precinct Line Road. Each area has its own gate failures, and Gate Repair in Hurst requires a technician who can read the gate and the ground it is set in before recommending work.

Metal Gate Repair in Hurst

Metal Gate Repair in Hurst most often involves re-hanging a steel or iron gate that has dropped on its hinges, re-welding a cracked frame, or fixing a slide gate that grinds instead of glides. The steel picket and tubular frame gates common on Hurst driveways are built to last, but the hardware is not. Hinges wear, weld joints crack under daily use, and rack-and-pinion tracks collect debris that stresses the operator. A typical metal gate re-hang in Hurst runs $190 to $420. Weld repairs and rust remediation run $250 to $680 depending on how much of the frame must be cut out and replaced.

Hinge & Post Repair

Heavy metal gates concentrate all their force on the hinge side, which is why the hinge post is the first failure point on years-old installations. We replace bent or seized hinges regularly across Hurst and inspect the post footing each time. A repaired hinge on a failing post just moves the problem down the line.

Weld & Rust Repair

Steel gates in Hurst take Texas sun, humidity, and the occasional severe thunderstorm. Rust creeps in at the weld joints and bottom rails first. We cut out the compromised section, weld in a replacement, and treat the area so the same joint is not rotting again in two years. The gate should outlast the repair.

Wood Gate Repair in Hurst

Wood Gate Repair in Hurst almost always starts with the hinge post, not the panel. The cedar and pressure-treated pine swing gates on mid-century ranchers look solid from the street, but the post below grade is often softening and leaning. A proper repair means resetting the post footing, correcting the sag, and then re-hanging the panel so it swings true. Typical wooden gate repair in Hurst runs $160 to $380. If the panel itself is rotted through, replacement boards and full panel rebuilds run $280 to $620.

Post Footing & Sag Correction

Hurst’s housing stock around the 1960s through 80s ranch corridors means most driveways have older wooden swing gates bolted to original hinge posts. Post footing rot, not the panel itself, drives the majority of our sag calls here. That makes post inspection the first step on nearly every Hurst gate, not an upsell afterthought. We reset the footing, brace the post, and re-align the gate before the operator ever gets touched.

Gate Realignment

A wooden gate that drags the driveway or will not latch is usually out of square, not broken. We correct the alignment with the post fixed, not with shims stacked on the hinge. The gate should close square and stay closed, not fight the latch on every cycle.

Trusted Brands We Service in Hurst

Carver Gate Repair technicians are trained on LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. In Hurst, the brands we see most are LiftMaster on older slide-gate installs, FAAC and Ghost Controls on newer swing gates, and Linear on mid-market automatic systems. If you need Hurst Gate Motor Repair, we keep common parts for these brands on every truck, which means fewer Hurst repair calls need a return visit for a part. We keep common parts for these brands on every truck, which means fewer Hurst repair calls need a return visit for a part. If your gate is acting up and the operator is one of these names, the technician who arrives will already know the wiring, the limit switch logic, and the reset procedure for that specific board.

Common Gate Repair Problems We See in Hurst Homes

• Rotted hinge posts on older wooden swing gates. The panel looks fine, but the post below grade has given way. Fixing only the panel means fixing it twice, so we inspect the footing first on every Hurst gate.
• Phantom reverses and nuisance stops on slide gates. The operator gets blamed, but the trip is often a mis-aimed loop detector or a fouled safety photocell. We diagnose the sensor chain before we replace a board.
• Aging automatic operators that have never been re-tested. A gate that opens and closes is not necessarily compliant. UL 325 entrapment protection has to be tested on photosensors and edge devices, and many Hurst installations have not been checked in years.
• Swing gates tripping the reversing edge on every close. We see this most on FAAC and Ghost Controls installs near Precinct Line Road. A shifted bracket or a gate slightly out of square causes the edge sensor to read pressure where there should be none.

Pricing for Gate Repair in Hurst, TX

We Also Serve Cities Near Hurst

Carver Gate Repair regularly handles calls across Hurst and the surrounding area, including North Richland Hills, Bedford, Colleyville, and Haltom City. The same written pricing and the same guarantee apply on every call in the northeast Tarrant County corridor. If you are just outside Hurst city limits, you still get the same live-person phone coverage and the same background-checked technician.

FAQs About Gate Repair in Hurst