Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haltom City
If your gate won’t open in Haltom City, it’s usually one of three things: a failing operator, a hinge post that shifted, or a safety device knocked out of alignment. Our crew works on all of them. We dispatch background-checked, uniformed technicians into every Haltom City neighborhood, from the older streets off Denton Highway to the subdivisions near Haltom Road and Broadway Avenue. Most repair calls are diagnosed and quoted the same visit. Call (469) 530-2485 and a live person answers, any hour, any day.
We’re not a generalist handyman service. Gates and gate operators are the only thing we work on. That focus matters in Haltom City, where a lot of homes sit on alley easements and rail-corridor lots that push gates into harder service than a typical front yard ever would. Soil movement, drainage, electrical spikes after storms – we see the pattern before we even pull up.
Why Carver Gate Repair Is Haltom City’s Preferred Gate Repair Company
Haltom City homeowners call us because the price we quote is the price on the invoice. That’s not a slogan. We hand you a written price before any work begins, and it doesn’t move. The Garrison Standard, which every Carver location has operated under since 2008, makes that non-negotiable. Lonnie Burke leads our operation, and he holds every tech to that standard on every single job.
Our technicians are background-checked and uniformed, so you know who you’re opening the gate for. They’re trained on nine gate motor brands, including Viking, DoorKing, and Elite – three we service constantly in Haltom City. When a motor fails, the fix isn’t guesswork. It’s knowing the board layout, the limit switch positions, and the right part off the truck.
Every repair carries a written guarantee good for a full year. If the same repair fails inside that window, the second visit is free. No argument, no invoice. Around northeast Tarrant County, where voltage spikes and clay soil put real stress on gate systems, that guarantee is doing actual work.
Metal Gate Repair in Haltom City
Metal Gate Repair in Haltom City usually means one of the following: a steel or iron swing gate that’s dropped on its hinge side, a slide gate that binds mid-track, or a rust-compromised frame that needs cutting and re-welding. For a typical sag correction on an ornamental iron gate, expect $225 to $480 depending on whether the post needs resetting or just re-shimming. If the hinge barrel itself is worn, replacement runs $140 to $260 per hinge, installed.
Slide gate work is different. A binding slide gate on a Haltom City alley easement often traces back to a foundation or track problem, not the gate leaf. You can’t fix a shifting post by adjusting wheels. The footing has to be addressed. That kind of repair runs $400 to $900 when it includes concrete work and rail realignment.
Hinge and Post Repair
When a steel gate starts dragging, the hinge post has usually moved. Haltom City’s clay soil expands and contracts through the year, and older post footings cracked under that cycle. We dig out the failed concrete, set the post plumb, and re-pour – then re-hang the gate so it clears evenly. $380 to $850 is the honest range for a post reset with new concrete.
Weld and Rust Repair
North Texas humidity and the occasional ice storm chew through thin-gauge steel. A rusted bottom rail or broken picket weld is a panel-strength issue, not just a look. We cut out the compromised section, weld in new material, and coat the repair. Most rust-and-weld jobs on a 10 to 14 foot gate run $250 to $600.
Wood Gate Repair in Haltom City
Wood Gate Repair in Haltom City is largely a post game. The wood itself – usually cedar or pressure-treated pine – sags when the hinge post leans, and the post leans because the footing gave way. A 12-foot wood swing gate that’s dragging on its latch side runs $300 to $650 to re-hang properly, including shimming or replacing hinge hardware. If the post footing needs full replacement, plan $500 to $900.
Wood gates also rot where water sits: bottom rails, the latch-side stile, and any place two boards trap moisture. Rebuilding a rotted bottom section with new lumber and proper drainage clearance usually runs $200 to $450. Replacing an entire cedar gate panel starts around $700 and goes up with height and hardware.
Gate Realignment
Sometimes the gate isn’t broken, it’s just twisted. A wood gate that racks out of square pulls on its hinges and eventually strips the lag bolts. We square the frame, add a tension rod or corner brace where the design allows, and reset the closure. A straightening job on a wood gate typically runs $150 to $350.
Lock and Latch Repair
A gate that won’t close securely is a gate that isn’t doing its job. We replace worn latch sets, adjust strike alignment, and install keyed or keypad-capable locks on wood gates throughout Haltom City. Most lock repairs run $120 to $280, and we quote the specific hardware before any work starts.
Trusted Brands We Service in Haltom City
Your gate operator is the brain of the system, and we service the brands actually installed across Haltom City. DoorKing slide operators show up on heavier commercial-style driveway gates. Viking and Elite operators are common on residential swing gates, particularly in the subdivisions where builders put in automatic driveway gates in the last fifteen years. We stock common boards, remotes, and safety accessories for these brands locally, so we’re not waiting on a distributor to get your gate moving again. When a DoorKing board fails or a Viking arm won’t retract, we show up with the right part and the right diagnostic equipment the first time.
Not every company works on all nine lines we carry. Most pick two or three. That limits their parts access and their depth of knowledge. Our techs train across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule because we don’t know what’s on a property until we arrive. We’d rather be ready for all of them.
Common Gate Repair Problems We See in Haltom City Homes
- Hinge post failure from soil movement. Haltom City sits on expansive clay that shrinks in drought and swells after rain. Post footings cracked and shifted, and the gate follows. We reset the post and re-pour the footing to grade.
- Operator control board faults after storms. Northeast Tarrant County gets real spring storm seasons, and voltage spikes knock out boards and loop detectors. We replace the board and often add surge protection at the disconnect.
- Safety photocell misalignment on alley easements. Gates that back onto rail-corridor or alley access points get jolted by traffic vibration, knocking photo eyes out of alignment. The operator then refuses to close, which is the system working as designed – but it still needs recalibration.
- Rack and pinion wear on slide gates. Older slide gate installs in Haltom City often skipped proper post footings. Once the post shifts, the rack strips or the pinion binds. We realign the drive and replace worn rack sections before the motor tears itself apart.
Pricing for Gate Repair in Haltom City, TX
Here’s what most Haltom City jobs actually cost, in plain numbers. A diagnostic service call runs $85 to $125, and that fee is applied to the repair if you approve the work. Full repairs on swing gates: $225 to $850. Slide gate repairs: $300 to $950. Operator or control board replacement: $450 to $1,200, depending on the motor and board. Full gate replacement runs $1,300 to $4,500, including posts, hardware, and installation. Every price is written down and agreed to before we touch a tool. Estimates are free. Call (469) 530-2485 for an exact quote on your gate.
We Also Serve Cities Near Haltom City
Our crews cover the whole northeast Tarrant County area, so if you’re in Fort Worth, North Richland Hills, Hurst, or Bedford, the same team and the same written-guarantee standard apply. Our full Gate Repair service reaches every neighborhood in the corridor, and we’re familiar with the gate hardware common across the region. This page is specific to Gate Repair in Haltom City, but the standard doesn’t change one zip code over.
Serving Haltom City, TX – Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haltom City
The sag usually isn’t the hinge hardware. It’s the post. Haltom City’s clay soil shifts seasonally, and once a post footing cracks, no amount of hinge tightening will hold the gate level. The post has to be dug out, reset plumb, and re-poured. That’s a $500 to $900 repair on most gates, and it’s permanent when done right. Call (469) 530-2485 and we’ll tell you whether the post is moving before you spend another dollar on hinge bolts.
Yes. Any automatic gate operator installed after UL 325 standards took effect is required to have an entrapment protection system – usually a set of photo eyes mounted near the gate opening. If your gate closes on an object or won’t close at all, the photocells are often the cause. We test and replace photo eye pairs for $150 to $350 installed.
If the gate moves fine with the remote but not the keypad, it’s the keypad circuit or its wiring. If nothing moves the gate, check the control board for error codes – that’s the operator. We diagnose the exact failure and quote the fix, whether it’s a keypad replacement at $180 to $320 or a board replacement in the $450 to $800 range. The written quote covers it before we start.
No, and any company that promises that is cutting corners. A proper operator installation includes the pad, wiring, safety edges, and testing – that work is measured and scheduled. What we do offer is same-day diagnosis for most repair calls, and a scheduled install with a written price before we begin. You’ll get a date, a time window, and a number that doesn’t move.
Yes. We repair steel, iron, aluminum, cedar, and pressure-treated pine gates across Haltom City. The failure modes are different – metal gates hinge and weld, wood gates rack and rot – but we handle both daily, along with the operators that drive them. If you’re not sure what your gate is made of or what’s failing, call (469) 530-2485 and we’ll diagnose it.
One More Thing About Haltom City Gates
Haltom City sits along the old Texas and Pacific Railway corridor, and that history shaped how the city’s lots were laid out. Many homes back onto rail-adjacent easements or alleyways where the primary access isn’t a street-facing driveway – it’s a 4-foot swing gate or a slide gate operator at the back of the property. That changes what fails. Those gates run on loop detectors and safety photocell calibration more than any mechanical component. The operator is doing the work; the sensors are what keep it safe. It’s the most common service call we field in Haltom City, and we show up ready for that exact failure.
We recently repaired a sagging 12-foot wood swing gate on a residential alley easement near Northern Hills Drive. The homeowner thought it was a hinge problem, and we understood why – the gate had been dragging for months. But the real failure was at the hinge post footing. Years of North Texas soil movement had cracked the concrete and shifted the post. We reset the post, corrected the sag, and re-commissioned the LiftMaster operator with a fresh safety photocell pair, bringing it back into UL 325 compliance. The gate now swings true and reverses on contact with the test object, the way it’s supposed to.
That’s the pattern. In Haltom City, the gate you see is almost never the whole story. The post, the footing, the drainage, the sensor alignment – that’s where the work lives. And that’s what we quote, in writing, before any work begins. Call (469) 530-2485 for a free estimate, and we’ll tell you exactly what your gate needs and what it’ll cost.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Haltom City with The Garrison Standard since 2008.