Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Pacifica, CA
Carver Gate Repair handles gate repair, gate installation, and gate motor repair across Pacifica, from Pedro Point to Sharp Park. Most jobs here put us face to face with salt air, steep driveways, and gates that carry real weight on a slope, which changes how we set posts, wire operators, and spec motors. If your gate is sagging, slow, or dead, call (469) 530-2485 and we’ll give you a written price before any work starts.
Why Pacifica Homes Are Different
Pacifica’s combination of coastal humidity and unstable hillside soil is hard on gate hardware. Wrought iron and steel gates in the Sharp Park and Fairmont neighborhoods rust faster than inland, so we replace hinges, weld cracked joints, and recommend hardware that holds up within a few blocks of the ocean. Driveway gates on the west slope of Skyline sit at angles that strain motors and strip gears, which is why we regularly see swing operators working harder than they should. Homes in Park Pacifica and Vallemar tend to have longer driveways, which often means a vehicle loop detector is the practical way to open a gate automatically. Permits are not usually required for replacing an existing gate or motor in Pacifica, but new gate installations can trigger a city review if the gate is on a corner lot or alters the driveway approach. Our technicians arrive with that in mind, not as an afterthought.
Our Main Pacifica Services
Most Pacifica calls to Carver Gate Repair fall into two buckets: a gate that stopped opening, and a gate that needs to be built right the first time. Below are the two services homeowners call about most, each with its own Pacifica page that goes into full detail.
Gate Repair in Pacifica
A Pacifica gate that drags, slams, or refuses to open usually has a bent hinge, a sagging post, or a section that has moved with the soil. We repair the full gate, not just the easy part: welding, leveling, replacing rollers, aligning posts, and bringing the gate back square so the motor doesn’t fight it. In Pacifica, we often find the trouble starts where wind and wet weather have worked on hardware for years. Read the full scope on our Gate Repair in Pacifica page.

Gate Installation in Pacifica
A new gate on a Pacifica hillside needs more than a good-looking panel. The post footings have to hold on a slope, the hinges have to carry the weight without sagging, and the whole line has to stay square through wet winters and dry summers. We install driveway gates, pedestrian gates, and yard gates, with the material and finish matched to the job and the neighborhood. See what a full installation includes on our Gate Installation in Pacifica page.

Gate Motor Repair in Pacifica
When a keypad, remote, or motor gives out in Pacifica, the fix is rarely just the circuit board. We check the full system: the limit switch, the loop detector, the safety edges, and the arm or operator itself, then repair or replace what’s actually failed. We carry parts and know-how for major motor brands, so a Pacifica driveway is usually back in service without waiting on a specialty call. Details are on our Gate Motor Repair in Pacifica page.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pacifica
Our Pacifica technicians work on Viking, Ghost Controls, DoorKing, and Elite equipment regularly, and carry the common parts for each on the truck. That usually means a same-visit fix instead of a second trip. See the full brand list on our brands.
Pricing for Gate Company in Pacifica, CA
| Service | Typical range in Pacifica |
|---|---|
| Gate repair, minor (hinge, latch, alignment) | $150 – $380 |
| Gate repair, major (welding, post reset, structural) | $400 – $1,400 |
| Gate motor repair | $225 – $850 |
| Gate motor replacement | $850 – $2,600 |
| Swing gate opener replacement | $1,200 – $3,400 |
| Slide gate opener replacement | $1,400 – $3,800 |
| Keypad or intercom add-on | $250 – $1,200 |
| Vehicle loop detector install | $600 – $1,500 |
| Safety edge or photo eye repair | $180 – $600 |
In Pacifica, the price moves up when a gate is on a steep slope, when coastal corrosion has spread into the structure, or when a motor has to be matched to an older system. Whatever we find, you get a written price before any work starts, so the number doesn’t change at the door.
Neighborhoods We Serve in Pacifica
Our crews work throughout Pacifica, including:
- Sharp Park
- Fairmont
- Pedro Point
- Vallemar
- Park Pacifica
Most Pacifica calls are answered the same day, and we schedule arrival windows, not open-ended “sometime between 8 and 8.”
Service Area – Cities Near Pacifica
In addition to Pacifica, we serve nearby Peninsula communities including San Bruno, CA, South San Francisco, CA, Millbrae, CA, and Daly City, CA. Scheduling is coordinated from our San Francisco Bay Area office; crews serve Pacifica locally.
Serving Pacifica, CA – Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pacifica
Most Pacifica calls are answered by a live person around the clock, and repair visits are usually available same day or next morning. The written price is set before work begins, and the repair carries a written one-year guarantee. Call (469) 530-2485 to confirm a window.
Replacing an existing gate or motor typically doesn’t require a city permit in Pacifica. New installations may need review if the gate changes the driveway approach or sits on a corner lot. We can tell you what’s likely to apply during the estimate.
Yes. We serve the full city, including the steeper streets near Skyline and the coastal neighborhoods. The main factor in scheduling is the job itself, not the address. A written price is provided before any work starts, no matter where in Pacifica the gate sits.
If your gate is giving you trouble in Pacifica, call Carver Gate Repair at (469) 530-2485 for a free estimate and a written price before any work begins. A real person answers the phone, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pacifica Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.





Before
After
Before
After
Before
After