Gate Repair in Weston - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Weston

Gate repair in Weston usually runs between $185 and $2,800 depending on whether we’re realigning a hinge post, replacing an operator arm, or rebuilding a footing that’s shifted in the fill soil. Most single-issue repairs on swing gates land in the $185 – $640 range and can be scheduled the same week, sometimes the same day when a technician is already working in Weston. We know which Weston communities have the heaviest settling, which HOA boards move quickly on approvals, and how to get a gate cycling clean without making you babysit the job. If your gate is dragging, reversing mid-travel, or dead at the keypad, call (469) 530-2485 and we’ll get a background-checked technician out to look at it.

Call (469) 530-2485

Why Carver Gate Repair Is Weston’s Preferred Gate Repair Company

Weston homeowners call us after they’ve already tried the generalist route. The security gate company that shows up late, quotes a number over the phone, then changes it after the post is pulled. We run on The Garrison Standard, and that changes how the whole job goes. Every repair gets a written price before any work starts. Every technician is background-checked and uniformed. Every repair carries a written guarantee, good for a full year, and if the repair fails inside that window we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing, not verbal.

Lonnie Burke runs our Weston coverage, and he’s built the crew around a simple rule: answer the phone, show up when you say you will, and leave the gate working with the site swept clean. Mr. Burke has worked on gate systems across Florida’s coastal and inland communities, and he knows the specific failure patterns Weston’s fill soil produces. We handle the work the right way the first time, because a gate that sags again in eight months isn’t a repair, it’s a refund waiting to happen.

Metal Gate Repair in Weston

Metal gate repair in Weston is our most common call, and the job usually starts at the hinge post, not the panel. Most of the aluminum and wrought-iron gates here are hung on posts set in fill soil, and when that soil shifts, the post tips out of level. That puts the entire load on the hinges, which then bind, sag, or stress-crack the welds at the frame. We see it constantly in Weston: a gate that starts grinding against the latch post, or one that used to swing smooth and now needs a shove. The fix is often a re-pour of the footing, not just a new hinge.

Metal gate repair in Weston typically runs $220 – $640 for hinge replacement, post straightening, and latch realignment. When the post has to be pulled and re-set in new concrete, expect $600 – $1,400, and that job takes a few days because the footing needs to cure before the gate gets re-hung. Repainting or rust remediation after the weld repair runs $350 – $900 depending on panel size and access.

Hinge and Post Work

A gate that’s dragging on the latch side almost always means the hinge post has crept out of level. In Weston, we’ve re-set more posts in The Ridges and Savanna than we can count. The correct repair is to pull the post, excavate the old footing, pour a deeper one, and bed the post back with proper drainage. Bolting on a new hinge will buy you a few months, and then the sag comes back.

Weld and Rust Repair

South Florida’s humidity, especially through the rainy season, finds every cut edge and pin weld. We grind out the failing welds, re-weld with the right filler for the gate material, then prime and topcoat. If the rust has gone structural at a corner joint, we’ll plate it from the back side so the repair is stronger than the original. Weld repair on a Weston gate typically runs $240 – $580 per repair point.

Wood Gate Repair in Weston

Wood gate repair in Weston is less common than metal work, but the gates that exist here are usually custom board-on-board or tongue-and-groove panels matched to HOA-approved design standards. The same fill-soil settling affects wood gates, though the failure shows differently: the frame twists instead of the hinges binding, and the gate starts to drag at one corner while the top rail pulls apart. Left alone, the hardware tears out of the soft grain and the gate drops completely.

Wood gate repair in Weston typically runs $240 – $780 for frame straightening, hinge re-seating, and section replacement. A full wood gate rebuild, where we repair the frame, replace rotted boards, and re-hang with new hardware, typically runs $700 – $1,800. That’s often the better long-term play here, because a gate installed on shifting soil needs a frame that works as a unit, not a collection of patched boards.

Frame Straightening and Board Replacement

Moisture cycling in the summer wet season swells wood and loosens old hardware. We re-set the frame, replace boards that have rotted at the bottom, and shim the hinges back to level. If the post has moved, we’re back to the footing, which means no amount of wood patching solves the problem. We tell homeowners that plainly, because spending $500 on a patch that fails in six months is worse than the honest fix.

Gate Realignment and Catch Hardware

A wood gate that’s started to bind at the latch often only needs the hinges shimmed and the catch re-set. But on Weston lots where the post has settled, the correction is a post lift, not a latch adjustment. We’ll measure the reveal on both sides and tell you which one it is before we touch the hardware.

Trusted Brands We Service in Weston

Our Weston technicians are trained across the common operator brands in this market: Linear, Viking, Ghost Controls, and DoorKing, among others. We keep parts for those systems stocked in our South Florida operation, so a limit switch or control board for a Linear actuator usually doesn’t mean a week of waiting. For a full list of the systems we repair, see our Gate Repair service page. Matching the right parts and programming to the operator already installed is the difference between a repair that lasts and one that creates a callback.

Common Gate Repair Problems We See in Weston Homes

• Hinge posts out of level from fill-soil settling. This is the single biggest gate problem in Weston, and it shows up as a gate that drags, reverses mid-travel, or grinds at the latch. We re-pour the footing or re-set the post, then re-align the operator to the corrected swing path.
• Safety photocells knocked out of alignment. When a post settles or the landscaping grows up around the photo-eyes, the beam breaks and the gate refuses to close, or the operator disables the entrapment protection. UL 325 requires working photo-eyes or edge sensors on automatic gates, and we re-aim or replace them on almost every service call where a gate keeps reversing.
• Undersized or corroded post footings. Many original Weston installs used shallow concrete footings that never anticipated soil movement. We find posts set in 18 inches of crumbling concrete, and the right repair is a deeper pour with better drainage. The panel was never the problem.
• HOA architectural review delays. Nearly every Weston community requires association approval before a replacement gate or a new operator gets installed. We help prepare the submittal with specifications, materials, and finish options, and we schedule the work once the board signs off. That approval step is not optional, and skipping it creates a violation notice on a brand-new gate.

Pricing for Gate Repair in Weston, FL

We Also Serve Cities Near Weston

Carver Gate Repair serves Weston plus a few surrounding areas for larger installations and scheduled service work: Jacksonville, Miami, Tampa, and Orlando. If you’re in one of those cities, the same written-price standard applies. For a deeper look at the service area, see Gate Repair in Weston.

FAQs About Gate Repair in Weston