Gate Repair in White Plains - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across White Plains

If your gate in White Plains won’t open, stalls halfway, or sags far enough to scrape the driveway, the fix usually comes down to two things: alignment and footing. Not parts-swapping. Most gate failures around here happen because driveways are short, sloped, and tight, so every component has to work within inches. We’re Carver Gate Repair, and we dispatch background-checked, uniformed technicians to White Plains addresses on a schedule that respects your time. Call (469) 530-2485 and you’ll get a live person, a straight answer, and a written price before any work starts. No voicemail, no call-back queue, no number that changes when the tech arrives.

Call (469) 530-2485

White Plains Gate Repair That Solves the Real Problem

White Plains isn’t like the flatter, roomier lots you find further out. The downtown core and the older residential streets off Mamaroneck Avenue, North Broadway, and Bryant Avenue were built tight. Gates here sit on sloped concrete aprons, behind short setbacks, and between retaining walls. That means a gate that works fine on a wide, flat driveway in Scarsdale can bind, false-trigger, or stall here because the operator, loop detector, and safety photocell were never tuned to the actual grade. Our crew works to Gate Repair standards that start with measuring the slope, checking the post footings, and watching the gate run through full cycles before we touch a single component. We serve White Plains homeowners who want the gate fixed once, not adjusted every season. Call (469) 530-2485 and describe what you’re seeing. We’ll tell you what’s likely happening and what it costs to make it right.

Key Takeaways:

• Gate repair in White Plains typically runs $180 – $340 for common mechanical fixes; motor replacement starts around $550 and most jobs land between $550 and $1,050.
• Every repair comes with a written price before work starts, and a written guarantee good for a full year.
• We service Linear, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Viking, Elite, and Mighty Mule operators.
• If the same repair fails inside the guarantee window, we return free. No charge, no argument.

Why Carver Gate Repair Is White Plains’s Preferred Gate Repair Company

White Plains homeowners call us because they’ve already been through the other kind of gate repair. The tech who shows up late, quotes a number over the phone, then finds “more problems” once the panel is open. Or the general contractor who treats the gate as an afterthought between bigger jobs. We don’t operate that way. Every Carver technician is background-checked and uniformed, so you know exactly who’s coming through the gate before they arrive. Every job gets a written price before work begins. The number doesn’t move at the door. Every repair carries a written guarantee, good for a full year from the date of service. That’s The Garrison Standard, and it’s how we’ve been operating since 2008.

We answer calls with a live person 24 hours a day, seven days a week, including weekends and holidays. If your gate fails at 10 p.m. on a Sunday, you’ll talk to a human being who can schedule a dispatch to White Plains, not a recording. Reviews from White Plains customers consistently mention the same things: the tech arrived when promised, explained the failure in plain language, and left the site clean. We’re part of the Garrison Partners family, and every location works to the same standard. The phone number is the same whether you’re calling about an electric gate on Mamaroneck Road or an automatic gate on a side street off Central Avenue: (469) 530-2485.

Iron Gate Repair in White Plains

Iron Gate Repair in White Plains usually means one of three things: a sagging panel, a rusted hinge that’s seized, or a post that’s shifted out of plumb on an older concrete footing. The panel is rarely the root cause. On many White Plains driveways, the concrete was poured decades ago and has settled unevenly, which shifts the hinge post and throws off the gate’s weight distribution. A homeowner sees the sag, assumes the hinges are loose, tightens them, and the gate still drags. What’s needed is a proper footing reset, not another turn on a bolt. A typical iron gate repair here runs $220 – $400, depending on whether we’re replacing hinges, grinding and re-welding a cracked frame member, or resetting a post.

Post Footing and Hinge Work

When a post shifts on older concrete, the fix means drilling, resetting with new anchor bolts or a new pour, and re-hanging the gate so the weight carries evenly. We don’t patch the panel and leave the post moving underneath it. That’s a two-week fix, not a repair. Weld and rust repair is often part of this work: grinding out corrosion where the hinge plate meets the frame, treating the metal, and reinforcing before repainting.

Realignment on Sloped Driveways

White Plains driveways that fall toward the street put constant downhill pressure on iron gate hinges. We check the gap at the latch side, the clearance at the bottom rail, and the alignment at both hinge barrels. When the gate is re-hung true, the sag doesn’t return in a season. Homeowners who’ve fought the same sag for years are usually surprised at how long the fix holds when the post is actually the thing that got repaired.

Sliding Gate Repair in White Plains

Sliding Gate Repair in White Plains almost always starts with the rack and pinion. A slide gate moves along a toothed rack bolted to the gate frame, and when that rack wears unevenly, the gate binds mid-travel and the operator stalls. That stall is frequently misdiagnosed as a dead motor, when the mechanical drivetrain is the actual problem and our Gate Motor Repair in White Plains starts with verifying that diagnosis first. On a tight White Plains driveway, where the slide track is short and the gate has to stop precisely, a worn rack or a shifted guide roller is enough to kill the cycle. Typical sliding gate repair in White Plains runs $240 – $480. Replacing the operator adds cost, but only if the operator is actually the failure.

Rack Replacement and Guide Roller Alignment

When a rack wears on one side, the gate lurches rather than glides, and the limit switch stops seeing the gate in the right position. We replace the rack section, set the guide rollers to the correct clearance, and check that the gate runs straight across the full travel. After that, the operator does its job without working against the track.

Loop Detector and Safety Photocell Correction

On tight driveways, a slide gate’s loop detector and safety photocell are squeezed right up against the boundary. If the photocell’s beam is even slightly off-axis after a bump or a freeze-thaw shift, the gate reverses mid-travel for no obvious reason. We re-aim the photocell, verify the loop detector’s sensitivity against the actual driveway pad, and test the reversal force. UL 325 entrapment protection isn’t optional, and we test it on every slide gate we repair.

Trusted Brands We Service in White Plains

We carry parts and programming knowledge for the operators White Plains homeowners actually have: Linear swing operators on side entries, Ghost Controls and DoorKing slide operators on apartment and condo lots, and Viking systems on older estate properties. Our technicians are trained on all nine major brands, so when a board fails on a Ghost Controls unit off Bryant Avenue, we don’t have to spend a week waiting on parts or reading the manual. We match the right parts to the system already installed, not whatever’s on the truck. For White Plains customers, that means shorter downtime and a fix that’s compatible with the existing wiring, remote controls, and keypad.

Common Gate Repair Problems We See in White Plains Homes

• Sagging swing gates with a patched panel and a shifting post. Older concrete driveways in White Plains settle unevenly over decades. The gate panel gets shimmed or the hinges get cranked tighter, but the post underneath is still moving. A proper repair resets the footing so the gate hangs true again.
• False-triggering loop detectors and safety photocells on sloped driveways. When the gate and operator sit on a grade, a photocell that’s a half-inch out of alignment reads as an obstruction and reverses the gate for no visible reason. We correct the alignment and tune the detector to the actual driveway pad, not the factory default.
• Slide gates that bind after a power dip or board fault. A rack and pinion system takes a beating when the operator gets a power surge. The rack wears unevenly, the gate catches, and the motor overloads. The fix is mechanical: replace the rack, re-align the rollers, test the board’s output. Not a new operator because someone didn’t look underneath first.
• Frozen or seized hinges on iron gates. White Plains winters do a number on untreated hinge pins, especially on gates that face north and stay shaded. We grind out the corrosion, replace the pin and bushing where needed, and treat the hinge so it moves freely instead of forcing the operator to muscle a rusted joint every cycle.

Pricing for Gate Repair in White Plains, NY

We Also Serve Cities Near White Plains

Our crews cover the surrounding area as well, including Yonkers, New Rochelle, Mount Vernon, and the Bronx. The same Gate Repair in White Plains standards apply everywhere we go: written prices, background-checked techs, and a full-year guarantee on every repair. If you’re just north or south of White Plains, call the same number and we’ll put you on the schedule.

FAQs About Gate Repair in White Plains