Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Burlingame, CA
Gate repair in Burlingame, CA comes down to finding a crew that answers the phone, shows up when promised, and puts the price in writing before any work begins. Burlingame’s mix of older east-side homes, newer Hillsborough-adjacent estates, and coastal weather means gates here see real wear: rust on iron hinges, wind pressure on tall driveway gates, and motor strain from frequent daily cycles. We’re Carver Gate Repair, and every Burlingame job runs on the Garrison Standard: a written price first, a background-checked technician, and a one-year written guarantee on the repair. Call (469) 530-2485 and a live person picks up, day or night.
Why Burlingame Homes Are Different
Burlingame’s gate work is shaped by three things. First, the housing stock: the Easton Addition and Lyon-Hoag neighborhoods hold dozens of 1920s through 1950s homes with original wrought-iron driveway gates. Those gates were built well, but hinge posts set in old concrete have often shifted, and the gates themselves gain weight with each repaint. Second, the climate: morning fog off the Bay and steady breezes off the Peninsula accelerate surface rust on iron and steel, especially on west-facing gates that never fully dry. Third, lot geometry: many Burlingame properties along El Camino Real and the flats have short setbacks, which means swing gates open toward the street and need careful travel-limit calibration so they never clip a passing car or a pedestrian on the sidewalk.
Permits are a real factor here too. Burlingame’s planning department reviews gate and fence work for height, setback, and sightline compliance, particularly on corner lots. A gate installation that ignores this will cost more to fix later than it saves up front. We account for local code on every quote, and our technicians carry the details of Burlingame’s current requirements so the job passes the first time.
Our Main Burlingame Services
The two calls Burlingame homeowners make most often are a gate that won’t open and a gate they need built. Below are the three services we handle in Burlingame, each with its own dedicated page covering prices, timelines, and what to expect.
Gate Repair in Burlingame
Most Burlingame repair calls start with a gate that’s sagging, dragging on the driveway, or latching poorly. On older east-side properties, weld fatigue at the hinge is common; on newer installations, the issue is usually a limit switch that’s drifted or a sensor that’s been knocked out of alignment. A repair visit includes an inspection of the hinges, the operator arm, the safety edges, and the control board, with a written price before any work starts. If the gate won’t move at all, we diagnose the motor and the power supply as part of the same call. Gate Repair in Burlingame covers troubleshooting, typical repair costs, and our same-day response for jammed or stuck gates.
Gate Installation in Burlingame
A new gate in Burlingame is a measured job, not a dispatched one. We start with a site visit to check the driveway grade, the setback, the wind exposure, and the condition of the existing posts. Then we quote the full job in writing: the gate, the operator, the power run, the safety edges, and the removal of the old gate. Burlingame corner lots often require a swing gate rather than a slide, and we’ll tell you that on the first visit rather than halfway through. Gate Installation in Burlingame walks through materials, operator options, and what a full installation includes in this city.
Gate Motor Repair in Burlingame
When the gate itself is solid but the motor won’t respond, the problem is usually the operator: a failed limit switch, a worn capacitor, a receiver that’s lost its programming, or a control board that’s gone bad after years of fog exposure. We service nine motor brands, including Linear, Viking, and DoorKing, and we carry common parts for these systems in our Bay Area stock. A motor repair starts with a full diagnostic, and the price is on paper before we touch anything. Gate Motor Repair in Burlingame covers common failure points, repair versus replace decisions, and expected turnaround for this area.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burlingame
Our technicians work on our brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Burlingame jobs, we commonly see Linear and Viking operators on older estates, and Ghost Controls kits on newer driveway gates. Keeping common parts for these systems in stock means most motor repairs don’t wait on a shipment.
Pricing for Gate Company in Burlingame, CA
| Service | Typical range in Burlingame |
|---|---|
| Gate hinge replacement (single gate) | $180 – $340 |
| Gate hinge replacement (double gate) | $260 – $490 |
| Gate wheel or caster replacement | $140 – $230 |
| Gate post reinforcement or reset | $320 – $610 |
| Weld repair (per broken weld point) | $110 – $200 |
| Gate opener motor replacement | $480 – $920 |
| Gate opener control board replacement | $240 – $450 |
| Safety sensor or photo-eye replacement | $150 – $280 |
| Gate opener limit switch replacement | $130 – $240 |
| Remote or keypad programming | $80 – $160 |
Prices in Burlingame run toward the higher end on older gates where rust has spread into the posts, and on long driveways where the power run is longer and the operator works harder. However, the price we quote is the price you pay: written down, agreed to, and signed before any work starts. No surprises at the door.
Neighborhoods We Serve in Burlingame
We cover all of Burlingame, from the flats along El Camino Real to the hillside properties near Mills Canyon and the tree-lined streets of the Easton Addition. Our typical response for a stuck gate in Burlingame is same day when you call before early afternoon.
- Easton Addition
- Lyon-Hoag
- Burlingame Terrace
- Mills Estate
- Downtown Burlingame
Service Area – Cities Near Burlingame
Burlingame sits in the middle of the Peninsula, and our crews also cover the neighboring cities along the 101 corridor. If you’re in San Mateo, CA, Millbrae, CA, San Bruno, CA, or Belmont, CA, the same written-price and one-year-guarantee terms apply. Scheduling is coordinated from our San Francisco Bay Area office, with local crews dispatched to your address.
Serving Burlingame, CA – Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burlingame
If you call before early afternoon, we can usually have a technician on site the same day. A gate that won’t open is a priority call, and our dispatchers answer live around the clock. Call (469) 530-2485 and we’ll tell you exactly when to expect the truck.
It depends on the scope. Replacing hinges, a motor, or a control board is service work and needs no permit. A new gate installation or a substantial modification may require city review for height, setback, and sightlines. We’ll tell you what applies to your property before you sign anything.
Burlingame is a regular, scheduled service area for us. Our Bay Area office dispatches crews to Burlingame daily, so there’s no out-of-area charge and no “we only come on Tuesdays” limitation. Response times are the same as for any Peninsula city we serve.
If your gate is sagging, stuck, or simply done working, call Carver Gate Repair at (469) 530-2485. A real person answers, the price is in writing before work starts, and every repair carries a full-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burlingame Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.