Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Beverly Hills, CA
Gate work in Beverly Hills comes down to three things: older estates with original ironwork, newer hillside builds with long driveways, and a city that expects things done right the first time. We’re Carver Gate Repair, and we handle gate repair, gate installation, and gate motor repair across Beverly Hills with written prices, background-checked technicians, and a full-year guarantee on every repair. If your gate is down, stuck, or groaning on its track, call (469) 530-2485 and a live person answers, day or night.
Why Beverly Hills Homes Are Different
Beverly Hills gates take more abuse than most people realize. The hillside lots above Sunset and through the Trousdale Estates sit on slopes where a gate that’s even slightly out of level fights its own weight every time it cycles. That constant strain wears down hinges, wheels, and motor gears faster than a flat-lot gate in the flats. We see it regularly: a gate that worked fine for years suddenly binds because the post has shifted a half inch in expansive soil, or because the cantilever rollers have chewed through their track after too many dry seasons.
The housing stock matters too. Much of Beverly Hills was built between the 1920s and 1960s, which means a lot of ornamental steel and wrought iron that was never designed for modern automation. Retrofitting a swing operator onto a 400-pound iron gate on a sloped driveway is a different job than installing on a new aluminum gate in a flat subdivision. The neighborhoods south of Santa Monica Boulevard and up into the Beverly Hills Flats tend toward estate gates with long setback driveways, while the canyons above Coldwater and Benedict add elevation, tight switchbacks, and occasionally a gate that has to clear a drainage swale. None of this is unusual for us, but it does mean we plan each job around the actual terrain, not a generic template.
Our Main Beverly Hills Services
Most Beverly Hills calls start with one of three problems: a gate that won’t open, a gate that needs replacing, or a motor that stopped responding. Each service has its own page with full pricing and detail.
Gate Repair in Beverly Hills
When a gate stops mid-cycle, drags on the ground, or won’t latch, Gate Repair in Beverly Hills covers the diagnosis and fix. We work on sagging hinges, bent tracks, broken wheels, failed limit switches, and misaligned sensors. Beverly Hills hillside gates often need the post re-set or the track re-leveled before the repair holds, so we check alignment before we touch the hardware. Every repair gets a written price before work starts and a written guarantee good for a full year.
Gate Installation in Beverly Hills
A new gate in Beverly Hills usually means matching an existing architectural style, whether that’s a modern horizontal-slat gate in the Hills or a traditional estate gate on a long driveway. Gate Installation in Beverly Hills covers the full job: removing the old gate, setting posts to handle the terrain, hanging the new gate, and testing it through hundreds of cycles. We measure, quote a written price, and order materials to spec. No surprises when the invoice comes.
Gate Motor Repair in Beverly Hills
When the operator runs but the gate doesn’t move, or the motor hums and stops, the problem is usually in the drive system, the control board, or a burned-out capacitor. Gate Motor Repair in Beverly Hills handles swing, slide, and barrier operators from the major brands, with parts matched to what’s already installed. We test the full circuit including loop detectors and safety edges, because a motor that keeps tripping its thermal overload usually has a mechanical cause behind it.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Beverly Hills
We service Linear, Viking, Ghost Controls, and DoorKing operators regularly across Beverly Hills, along with five other major gate motor brands. Common boards, remotes, and drive parts for these systems are stocked on our trucks, which means many motor repairs are finished on the first visit. See our brands for the full list.
Pricing for Gate Company in Beverly Hills, CA
These are the ranges we typically quote for gate work in Beverly Hills. The exact number depends on your gate’s size, material, and what failed, but you’ll always see the written price before we start.
| Service | Typical range in Beverly Hills |
|---|---|
| Standard gate repair | $295 – $575 |
| Gate motor replacement | $575 – $1,250 |
| Hinge replacement (steel or iron) | $180 – $450 per hinge |
| Track and roller replacement | $350 – $850 |
| Swing gate operator installation | $850 – $1,900 |
| Slide gate operator installation | $900 – $2,100 |
| Loop detector repair or replacement | $225 – $500 |
| Limit switch replacement | $150 – $300 |
| Control board replacement | $250 – $600 |
| Full gate installation (standard driveway) | $2,750 – $7,500 |
| Custom gate installation (estate or hillside) | $6,500 – $18,000 |
Two things push prices toward the higher end in Beverly Hills: hillside access where we have to work from a slope or run power over longer distances, and heavier gates that need larger operators and stronger posts. Whatever the job, you get a written price before any work starts and that number doesn’t move at the door.
Neighborhoods We Serve in Beverly Hills
We dispatch to every part of Beverly Hills, and our scheduling is coordinated from the brand’s Los Angeles office with crews serving the city locally. Typical response time for service calls is same-day or next-day depending on call volume.
- Trousdale Estates
- Beverly Hills Flats
- Benedict Canyon
- Coldwater Canyon
- The Golden Triangle
Service Area – Cities Near Beverly Hills
We also run gate repair and motor service calls into the surrounding area. If you’re in West Hollywood, CA, Culver City, CA, Santa Monica, CA, or Marina del Rey, CA, the same crew standards and written pricing apply. Scheduling goes through the same phone number and the same live dispatchers.
Serving Beverly Hills, CA – Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Beverly Hills
We dispatch same-day for most repair calls in Beverly Hills, and phones are answered by a live person 24/7, including weekends and holidays. A gate stuck open is a security problem, and a gate stuck closed traps cars in or out, so we treat both as urgent. Call (469) 530-2485 and we’ll give you a real arrival window, not a voicemail.
Most repair work on an existing gate doesn’t require HOA or city approval, but replacing a gate or changing its style often does, especially in gated communities or historic districts. We’ll flag that early so the job doesn’t stall. What we can always do is quote the repair in writing before anything is touched.
Yes. Beverly Hills has a lot of ornamental iron and stone-column gate systems, and they need careful handling because the post work is structural. We match the hardware to the existing material and confirm alignment before the gate goes back on its hinges. Call (469) 530-2485 for a written estimate on your specific gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.