Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Los Angeles, CA
Gate repair in Los Angeles means working on properties that range from 1920s Spanish Colonials in Hancock Park to gated hillside estates in Studio City, with everything in between. The climate is forgiving on steel, but the terrain, security expectations, and sheer variety of gate hardware across this city are not. We handle gate repair, gate installation, and gate motor repair across Los Angeles with written prices before any work starts, background-checked technicians on every call, and a 365-Day Done Right Promise in writing on every repair. If you need a gate fixed, replaced, or automated, call (469) 530-2485 and a live person answers, any hour.
Why Los Angeles Homes Are Different
Los Angeles gate work is shaped by three things: age of the housing stock, elevation changes, and security requirements that go well beyond curb appeal. In neighborhoods like Los Feliz and Silver Lake, many properties were built between 1920 and 1960. That means gate posts set in soil that has shifted for decades, hinges that have carried more weight than they were designed for, and driveway slopes that put constant stress on wheel gates and slide tracks. A gate that binds halfway open on a flat lot in the Valley is one problem. The same gate on a steep incline in Mount Washington is a different animal entirely, and it needs a technician who understands grade, drainage, and post anchoring, not just hinge lubrication.
The second factor is security. Los Angeles homeowners expect a gate to actually secure the property. That means chains and operators sized correctly for the gate’s weight and cycle count, photo eyes aligned so the gate will not close on a car or a child, and loop detectors that read the vehicle every time. The third factor is consistency across the city: coastal air in Playa del Rey and Pacific Palisades accelerates corrosion on exposed steel and circuit boards, while inland heat in Sherman Oaks and Encino shortens the life of plastic gears inside swing operators. A Los Angeles gate technician has to diagnose for the specific microclimate, not just the symptom.
Many Los Angeles neighborhoods also have specific expectations around noise and appearance. HOA-governed communities in areas like Westchester or Baldwin Hills often require gate styles and operator placement to match the existing streetscape. We deal with those constraints daily.
Our Main Los Angeles Services
Most Los Angeles homeowners call us for one of three reasons: a gate that has stopped moving, a gate that needs to be replaced entirely, or a motor that runs but will not open or close the gate. Each of these is handled on its own Los Angeles page, with specific pricing and details. Here is a short route to what you need.
Gate Repair in Los Angeles
A gate repair call in Los Angeles typically starts with a gate that sags, drags, or will not latch. The cause is usually a worn hinge, a bent post, or a wheel that has flattened on one side after years of running the same track. In older Los Angeles neighborhoods, we regularly find gate posts that were set directly in concrete without proper depth, and after thirty or forty years of soil movement, the post has started to lean. That lean pulls the gate leaf out of square, and no amount of hinge adjustment fixes it until the post is addressed. We repair the gate itself, not just the visible symptom. Full details, including what the written quote covers, are on the Gate Repair in Los Angeles page.
Gate Installation in Los Angeles
Installing a new gate in Los Angeles means matching the gate to the driveway grade, the post condition, and the look of the house. A single-swing gate on a slope in Eagle Rock needs different hinges than a double-swing gate on a flat lot in Culver City. A driveway gate off a busy street in Highland Park often needs an operator with a faster open speed than a gate at the end of a long private drive in Beverlywood. We measure, quote a written price, and install the gate and its hardware as one job, not as pieces from different suppliers. If you are planning a new gate rather than a repair, start with Gate Installation in Los Angeles.
Gate Motor Repair in Los Angeles
When the motor runs but the gate does not move, or the gate opens halfway and reverses, the problem is usually a limit switch, a failing capacitor, or a control board that has given up after repeated power surges. Los Angeles sees its share of surge-related motor failures because older neighborhoods have older electrical service. A motor on a swing arm in Atwater Village behaves differently from a slide operator in Tarzana, and the fix depends on which of the nine major brands is installed. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, with parts matched to the existing system. Gate Motor Repair in Los Angeles has the breakdown, including what a typical motor replacement costs in this market.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Los Angeles
We work on Linear, Viking, Ghost Controls, and DoorKing motors, among the nine brands we stock parts for. That matters in Los Angeles because so many gates were installed years ago by different contractors, and the motor model on the gate tells you what is actually compatible. Our technicians arrive with the right parts for the common failures on each brand, so the job gets done in one visit. See our brands for the full list.
Pricing for Gate Company in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Gate repair (minor, hinge/wheel/latch) | $180 – $340 |
| Gate repair (major, post reset or frame work) | $425 – $850 |
| Gate motor repair (limit switch, capacitor, or board) | $240 – $480 |
| Gate motor replacement (operator swap, parts and labor) | $850 – $1,900 |
| Full gate installation (single swing, standard steel) | $1,800 – $3,200 |
| Full gate installation (double swing or slide gate) | $3,500 – $6,800 |
| Electric strike or gate lock replacement | $220 – $390 |
| Photo eye or loop detector replacement | $190 – $360 |
| Remote or keypad programming (per unit) | $80 – $160 |
What pushes a Los Angeles gate job up in price is usually access and site conditions: a hillside driveway that needs staging, a post set in concrete that requires cutting and re-pouring, or a gate that has to match an HOA spec. You will see every line item in writing before we start, and the number does not move at the door.
Neighborhoods We Serve in Los Angeles
We cover the full Los Angeles area, from the Valley through the Westside and across to the Eastside. Typical response for a repair call inside the core service area is same-day or next-day, depending on the season and the time of day you call. These are some of the neighborhoods where our crews are dispatched regularly:
- Studio City and Sherman Oaks (Valley corridor, slide gates on flat lots)
- Los Feliz and Silver Lake (older hillside homes, steep driveways)
- Eagle Rock and Highland Park (pre-war houses, narrow side yards)
- Westchester and Playa del Rey (coastal air, hardware corrosion)
- Beverlywood and Culver City (mid-century homes, HOA-sensitive gate styles)
Service Area – Cities Near Los Angeles
We also take calls from the smaller cities on the edges of Los Angeles where gate work is just as consistent. That includes Huntington Park, CA, South Gate, CA, Bell, CA, and Maywood, CA. If you are in one of those areas and need a gate repaired or a motor replaced, call the same number and we will route the nearest crew to you.
Serving Los Angeles, CA – Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Los Angeles
For most Los Angeles repair calls, we can have a technician out same-day or next-day. The exact window depends on the neighborhood and the volume of calls that day, but when you call, the dispatcher gives you a real arrival window, not a four-hour guess. Call (469) 530-2485 and you will speak to a person.
Most gate replacements on an existing driveway do not require a city permit, but some hillside properties and HOA-governed neighborhoods have their own review process. If your Los Angeles home is in an HOA, check the governing documents before the install date. We can work within HOA specs as long as they are provided at the time of the written quote.
Yes. We service nine gate-motor brands, including Linear, Viking, Ghost Controls, and DoorKing, so the replacement parts fit the system you already have instead of forcing a whole new setup. Matching the existing brand avoids rewiring and keeps the install simpler. We will tell you in the written quote whether a repair or a full motor replacement makes more sense on your gate.
For a written price on any gate repair, gate installation, or gate motor repair in Los Angeles, call (469) 530-2485. A live person answers, day or night, and every repair carries the 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.