Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Angleton, TX
Carver Gate Repair is the gate company Angleton homeowners call when a gate stops opening, sags into the drive, or needs a full replacement. We work exclusively on gates and gate motor systems, which means the technician who shows up at your house has spent the day working on gates, not splitting time between fences, garage doors, and whatever else came in that week. Call (469) 530-2485 and you’ll get a live person who can schedule a visit. Before any work starts, you get a written price. That number does not move.
Why Angleton Homes Are Different
Angleton sits in Brazoria County, about ten miles inland from the Gulf. The air here carries salt and heavy humidity most of the year. That combination works on gate hardware steadily: hinges rust, powder coating breaks down, and circuit boards inside gate operators corrode faster than they would in drier towns like Alvin to the northeast. We see it on nearly every service call. A gate that looks fine from the street often has pitted rollers and a control board with green corrosion creeping across the terminals once we open the cover.
Housing stock here spans a wide range, from established neighborhoods with homes built in the 1960s and 1970s to newer subdivisions on the west side of town. Older properties often have gates that were welded on site decades ago, with non-standard hinge spacing and posts that have shifted in the gumbo soil. Gumbo clay expands and contracts with moisture, and gates that were hung level ten years ago are now out of square by half an inch or more. That means repairs in Angleton frequently require resetting the post block or adjusting the hinge geometry before the gate will close properly again. Brusly, Stratton Ridge, and neighborhoods along Highway 288B all present their own versions of these conditions, but the salt air and shifting soil are consistent across the entire Angleton service area.
Our Main Angleton Services
The two calls we get most from Angleton homeowners are for repair work on existing gates and for motor systems that have given up. So we built dedicated pages for each of those services, plus installation, so you can read the details that apply to your situation and call with a clear idea of what to expect. Here’s what those pages cover and why each matters in Angleton specifically.
Gate Repair in Angleton
This is the page for gates that stick, sag, drag on the concrete, or have hardware that’s rusted through. In Angleton, the salt air and gumbo soil mean we’re often repairing hinge welds, replacing rollers, and rebuilding post mounts that have shifted rather than just adjusting a latch. Gate Repair in Angleton walks through the common failures we find here, what a repair visit involves, and what you’ll pay before we start. Every repair is backed by our written guarantee, good for a full year.
Gate Installation in Angleton
New gate work in Angleton starts with getting the post footings deep enough for gumbo soil, which moves more than most homeowners expect. That affects the whole job: concrete depth, gate weight, and which hardware will hold up to salt air. Gate Installation in Angleton covers what a proper installation includes, how we size a gate to the opening, and why the written quote you approve is the price you pay. We schedule a free measure first, then deliver a written price for the full job.
Gate Motor Repair in Angleton
When a gate motor hums but won’t move, or trips the breaker, or works only when the weather is dry, the cause is usually inside the operator. Humidity near the Gulf shortens the life of control boards, limit switches, and capacitors. Gate Motor Repair in Angleton covers the brands we service, what we test first, and how we get the system running without selling you a new motor when a component repair will do the job. If the repair fails inside the guarantee year, the second visit is free.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Angleton
We’re trained on nine gate-motor brands, and in Angleton we see a lot of FAAC, BFT, and Linear operators on residential drives, with some Viking systems on larger properties. Common parts for those brands are stocked on our service trucks, which keeps most jobs to one visit. If you’re not sure what brand you have, our brands page shows what each system looks like.
Pricing for Gate Company in Angleton, TX
These are the price ranges we quote most often for gate work in the Angleton area. Every price is confirmed in writing before work begins.
| Service | Typical range in Angleton |
|---|---|
| Gate repair service call (diagnostic, no parts) | $75 – $125 |
| Minor gate repair (hinge adjustment, latch replacement) | $145 – $250 |
| Moderate gate repair (roller, wheel, or post bracket work) | $250 – $500 |
| Major gate repair (re-weld, section replacement, post reset) | $500 – $1,100 |
| Gate motor diagnostic (on-site, non-warranty) | $89 – $185 |
| Gate motor repair (limit switch, capacitor, minor board work) | $185 – $450 |
| Gate motor replacement (operator only, standard brands) | $550 – $1,450 |
| Full gate installation (standard single-swing, includes hardware) | $900 – $2,400 |
| Full gate installation (double-swing or heavy custom) | $2,200 – $5,600 |
| Loop detector installation or replacement | $250 – $500 |
What pushes a quote higher in Angleton is usually the post. Gumbo soil movement means some repairs require resetting a post or pouring a new footing before the gate can be rehung, and that adds labor and concrete time to the invoice. You’ll know if that’s needed before we start, because the written price covers the whole job, not just the part you called about.
Neighborhoods We Serve in Angleton
We run service calls across the Angleton area, including the neighborhoods and roads below. Response time for most non-emergency repair calls is same-day to next-day depending on call volume; emergency calls are handled through our live phone line, which is answered 24/7.
- Brusly
- Stratton Ridge
- Angleton town center, near the county courthouse
- Neighborhoods along Highway 288B
- Westside subdivisions near Highway 35
Service Area – Cities Near Angleton
We also run calls in the communities around Angleton, including Lake Jackson, TX, Clute, TX, Freeport, TX, and Alvin, TX. Dispatch and scheduling for all of these areas is coordinated from the brand’s Dallas-Fort Worth office, with local crews serving Angleton and the surrounding Brazoria County towns.
Serving Angleton, TX – Our Local Coverage Area
We’re based in the Angleton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Angleton
For most repair calls we can get a technician to your Angleton property the same day or the next morning. Emergency calls go through our live phone line at (469) 530-2485, which is answered around the clock, seven days a week. We’ll give you a realistic window when you call, not a vague “sometime today.”
Some Angleton HOAs require approval before a new gate goes in, especially in newer subdivisions. We can’t file that for you, but we’ll tell you what to check before you schedule installation. Repairs to an existing gate rarely need permits or HOA sign-off. Call (469) 530-2485 if you want to talk through your neighborhood’s situation.
We serve Angleton and the nearby communities of Lake Jackson, Clute, Freeport, and Alvin. If you’re right on the edge of the service area, call us at (469) 530-2485 with your cross streets and we’ll confirm on the spot whether we can schedule you.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Angleton Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.