Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Freeport, TX
Gate work in Freeport means dealing with salt air, coastal winds, and soil that shifts with every wet season. A gate that works fine in a drier climate corrodes faster here, and the hardware takes more abuse than homeowners expect. Carver Gate Repair handles Gate Repair in Freeport, Gate Installation in Freeport, and Gate Motor Repair in Freeport with written pricing and a full-year guarantee on every repair. Call (469) 530-2485 and you’ll get a live person, not a voicemail box.
Why Freeport Homes Are Different
Freeport sits on the Gulf Coast where the Brazos River meets the sea, and that geography shows up in every gate we open. The humidity and salt spray moving off the Gulf accelerate rust on hinges, bolts, and motor housings. We regularly see gate frames in Freeport where the powder coating has failed at the weld points and the steel underneath has started to pit. A standard steel gate in this climate needs more than a paint touch-up; it needs the corrosion addressed before the structural metal thins.
Soil movement is the other constant. The clay-heavy ground near the Brazos expands and contracts through wet and dry cycles, and that pushes gate posts out of alignment. A gate that swings clean in March can drag by September. Homes along the older streets near the Freeport Municipal Park and down toward the river tend to have gate posts set in shallow concrete, which makes the problem worse as the ground shifts. We check post plumb and hinge alignment on every repair call in Freeport, because a misaligned post is usually the root cause of a gate that won’t latch or a motor that strains against the load.
Our Main Freeport Services
Gate Repair in Freeport
Most Freeport repair calls start with a gate that won’t close, a hinge that’s pulled loose, or a latch that no longer catches. Salt corrosion attacks the moving parts first, so we inspect hinges, wheels, and the latch strike before anything else. We carry replacement hardware that’s sized for the heavier gates common in Freeport, and we quote a written price before any work begins. If the repair fails inside a year, the second visit is free under the 365-Day Done Right Promise. Gate Repair in Freeport covers the full scope of what we take on.
Gate Installation in Freeport
New gate installations in Freeport should be spec’d for coastal conditions from the start. That means galvanized or properly powder-coated steel, stainless hardware where the gate meets the post, and posts set deep enough to hold through the seasonal soil shifts. We measure the opening, account for the grade at the driveway or entrance, and write a fixed price for the full job before we order materials. Gate Installation in Freeport walks through what a new gate includes and what it costs.
Gate Motor Repair in Freeport
Gate motors in Freeport die faster when the gate itself is out of alignment and the operator has to work harder on every cycle. The salt air also gets into control boards and limit switches, so we check those components closely on motor calls. We service nine brands, including Linear, Viking, Ghost Controls, and DoorKing, and we keep common parts for those systems on the truck. Gate Motor Repair in Freeport covers the details on operators and automation.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Freeport
Our technicians work on Linear, Viking, Ghost Controls, and DoorKing systems, among others. We stock common replacement parts for these brands locally and can have less common components ordered and scheduled quickly. Visit our brands page for the full list of equipment we service.
Pricing for Gate Company in Freeport, TX
These are the price ranges Freeport homeowners typically see on our jobs. Every quote is written and agreed before work starts, so the number on the sheet is the number you pay.
| Service | Typical range in Freeport |
|---|---|
| Gate spring replacement | $150 – $300 |
| Hinge replacement (standard gate) | $100 – $250 per hinge |
| Gate wheel or caster replacement | $80 – $180 |
| Gate latch or lock replacement | $90 – $240 |
| Adjustment and minor alignment | $70 – $120 |
| Gate motor replacement | $500 – $1,200 |
| Control board replacement | $250 – $500 |
| Limit switch replacement | $120 – $280 |
| Loop detector installation | $300 – $600 |
| Full gate replacement | $900 – $4,000+ |
Prices in Freeport push higher when a gate is heavily corroded and the post mounts need rebuilding, or when a motor has to be matched to an older operator that’s no longer made. We write the quote before any work begins, so there’s no surprise at the end of the job.
Neighborhoods We Serve in Freeport
We cover all of Freeport and the surrounding Brazoria County communities. Most calls inside Freeport proper get a same-day or next-day visit, depending on when you call and what’s already on the schedule.
- Freeport Municipal Park area
- Velasco
- Old Freeport near the Brazos River
- Areas along Gulf Boulevard
- Neighborhoods off N Brazosport Boulevard
Service Area – Cities Near Freeport
Beyond Freeport, we take gate repair and motor work in the neighboring communities. That includes Clute, TX, Lake Jackson, TX, Angleton, TX, and Alvin, TX. If you’re in one of those cities, call (469) 530-2485 and we’ll get you on the schedule.
Serving Freeport, TX – Our Local Coverage Area
We’re based in the Freeport area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Freeport
Yes. We cover the entire Freeport area, including Velasco, the neighborhoods near Freeport Municipal Park, and homes along Gulf Boulevard and N Brazosport Boulevard. We also serve Clute, Lake Jackson, Angleton, and Alvin. Call (469) 530-2485 to confirm your address.
Most gate repairs and replacements don’t need a permit, but new installations with electrical runs for motors can require one depending on the scope. We’ll check the current Freeport requirements for your job and include any permit work in the written quote before anything starts.
Most Freeport repair calls get a same-day or next-day visit. If the job is an emergency, like a gate stuck open or a motor that won’t disengage, tell the phone operator and we’ll prioritize it. Call (469) 530-2485 for the current schedule. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Freeport Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.