Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Freeport
Gate repair in Freeport typically runs $180 – $650 depending on the problem, and most calls are completed in a single visit. Our Gate Repair crews cover Freeport from the Dallas-Fort Worth dispatch office, with technicians already working the Brazoria County corridor most days of the week. We’re familiar with the salt air coming off the Gulf, the way it accelerates rust on hinges and welds, and the heavier clay soils around Oyster Creek that shift posts after heavy rains. That local knowledge matters when we’re diagnosing why your gate won’t close or why the motor keeps tripping. Call (469) 530-2485 and you’ll reach a live person, not a voicemail box.
Why Carver Gate Repair Is Freeport’s Preferred Gate Repair Company
We’ve been operating to The Garrison Standard since 2008, and that standard travels with us into every Freeport job. Homeowners in this market tell us they’ve dealt with contractors who quote one price on the phone and present a larger number at the door. We don’t do that. Every Carver customer gets a written price before any work starts, and that price doesn’t move.
Our technicians are background-checked and uniformed. You know who’s coming through your gate and why. The 365-Day Done Right Promise covers every repair we make in Freeport, good for a full year from the date of service. If something fails inside that window, we come back free of charge, no argument.
Phones are staffed by a live person 24 hours a day, including weekends and holidays. No call-back queues. No waiting until Monday morning when your gate is stuck open Saturday night.
Wood Gate Repair in Freeport
Wood Gate Repair in Freeport faces conditions you won’t find inland. The humid Gulf air swells and contracts boards seasonally, and the salt content in the breeze degrades hardware faster than in Dallas or Houston proper. We see a lot of cedar and pressure-treated pine gates in the neighborhoods off FM 1495 and along the Old Brazoria River corridor, many built in the 1990s and 2000s when this area developed heavily.
A typical wood gate repair in Freeport runs $220 – $480. That covers hinge replacement, post resetting, frame reinforcement, and hardware swaps. If the gate has sagged far enough to drag, we may need to plane the bottom edge and reset the post in concrete rated for our local clay.
Rot and Frame Separation
Water wicks up from concrete footings into end grain, especially on gates without proper cap flashing. We cut out rotted sections, sister in treated lumber, and seal with an oil-based primer that holds up to Freeport’s humidity. The post itself may need replacement if the rot extends below grade.
Hardware Corrosion
Standard zinc-coated hinges last two to three years here before pitting sets in. We upgrade to stainless or hot-dip galvanized hardware on coastal jobs, which doubles service life even within sight of the Gulf.
Driveway Gate Repair in Freeport
Driveway Gate Repair in Freeport covers swing, slide, and barrier arm systems for residential driveways and small commercial entrances. The most common call we get is a gate that opens fine but won’t close, or closes halfway and reverses. Usually that’s a safety sensor issue, a limit switch out of adjustment, or debris in the track after a storm blew through.
Typical driveway gate repair in Freeport costs $250 – $620. Simple sensor realignment or limit switch adjustment falls at the lower end. Motor replacement, articulating arm rebuild, or track straightening after a vehicle impact pushes toward the higher end. We also handle Gate Installation in Freeport when repair isn’t economical.
Slide Gate Track Problems
Sand and small debris from unpaved shoulders collect in V-groove tracks, especially after the heavy rains that hit Freeport in spring and fall. We clean and re-lubricate, check roller wear, and shim the track if the gate has started to bind. A binding slide gate will eventually burn out its motor.
Safety System Failures
Photo eyes and loop detectors are required by code for automatic driveway gates. We test every safety component during a repair call and document the results. If your system lacks current safety hardware, we’ll quote the upgrade with the same written price guarantee.
Trusted Brands We Service in Freeport
We stock parts and train our technicians on nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Freeport customers, that means we’re not ordering parts from Houston and waiting three days. Our trucks carry common Linear and Viking control boards, Ghost Controls battery kits, and DoorKing loop detector modules. If your system is one of these brands, we likely have what we need on the first visit. If it’s an older Elite or Mighty Mule unit that’s been discontinued, we’ll source the part or quote a compatible replacement with the same upfront pricing.
Common Gate Repair Problems We See in Freeport Homes
- Rust-through on welds and hinges. The salt air from the Gulf accelerates corrosion on any steel component without proper coating. We see this most on gates within a mile of the water, where even “exterior grade” hardware shows pitting in under two years.
- Post lean after heavy rain. Freeport’s clay soils expand when saturated and shrink during dry spells. That cycling tilts posts, especially on older installations without adequate concrete footings or proper drainage.
- Motor failure after power fluctuations. Coastal storms cause brief outages and surges that damage control boards. We recommend surge protection on every new installation, and we can add it to existing systems.
- Wooden gate sag from humidity cycling. Boards absorb moisture in summer, swelling the gate frame, then contract in cooler months. Over seasons, the frame loosens and the gate drags or won’t latch properly.
Pricing for Gate Repair in Freeport, TX
We give actual numbers, not “call for estimate” dodges. Here’s what gate repair costs in Freeport’s market:
| Service | Typical Range |
|---|---|
| Basic hinge/hardware replacement | $180 – $290 |
| Post reset or reinforcement | $280 – $450 |
| Wood gate frame repair | $220 – $480 |
| Driveway gate sensor/limits adjustment | $180 – $260 |
| Gate motor repair (control board, arm, etc.) | $320 – $650 |
| Full motor replacement | $850 – $1,400 |
What moves a job up or down within these ranges: accessibility (can we get our truck and welder to the gate?), the age of the system (discontinued parts cost more to source), and whether the post footing has failed entirely. Every customer receives a written price before any work starts. That number doesn’t change once we’re on site. Estimates are free, and there’s no charge for us to look at the problem and give you the number.
We Also Serve Cities Near Freeport
Our Freeport coverage area extends to Clute, Lake Jackson, Angleton, and Alvin. If you’re in one of these communities and your gate is binding, sagging, or the motor’s stopped responding, the same crew, same pricing, and same 365-Day Done Right Promise apply. We also handle Gate Motor Repair in Freeport and surrounding areas for all nine brands we service.
Serving Freeport, TX – Our Local Coverage Area
We’re based in the Freeport area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Freeport
Most Freeport calls are scheduled within 24 hours, and emergency situations where the gate is stuck open or blocking vehicle access get same-day priority. Our technicians are already working the Brazoria County corridor regularly, so we’re not dispatching from downtown Houston. Call (469) 530-2485 for availability.
We cover the full Freeport area, from the older homes near the harbor and downtown grid to the newer developments along FM 1495 and the neighborhoods toward Oyster Creek. The clay soil conditions and salt exposure vary by proximity to the water, and we adjust our repair approach accordingly.
Yes. Our phones are answered by a live person 24 hours a day, 7 days a week, including weekends and holidays. If your gate is stuck open, stuck closed, or the motor has failed outside business hours, we can dispatch for emergency service. The same written price guarantee applies.
Freeport pricing runs comparable to Lake Jackson and Angleton, slightly lower than central Houston due to lower overhead, though coastal conditions can add cost if salt corrosion has damaged multiple components. We don’t charge travel fees for Freeport calls.
The 365-Day Done Right Promise covers every repair for a full year from the date of service. If the same problem returns, or if our repair fails, we come back and fix it free of charge. No argument, no re-diagnosis fee. The guarantee is in writing on every invoice.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Freeport and the Brazoria County area under The Garrison Standard since 2008.