Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Dallas, TX
Gate repair in Dallas usually runs between $180 and $340 for a spring or hinge fix, while a full motor replacement starts around $650 and can top $1,800 depending on the operator and access work involved. Most Dallas jobs are completed the same day the technician arrives, parts in the truck. If you need someone out today, call (469) 530-2485 and a live person answers, not a queue.
We’re the Dallas branch of Carver Gate Repair, a Garrison Partners company. We work only on gates: repair, installation, and gate motors. Lonnie Burke runs the Dallas operation, and every job is written up with a fixed price before tools come off the truck. The number you’re quoted is the number on the invoice. That rule applies on every call, every day, no exceptions.
Why Dallas Homes Are Different
Dallas gate work is shaped by three local realities that don’t show up in other Texas metros. The first is soil. Large sections of Dallas sit on expansive clay that swells with rain and contracts in summer heat. Gate posts set without deep concrete or steel reinforcement shift over time, which is why we see so many gates that strike the latch post in August but clear it fine in spring. A sagging gate in Dallas is rarely a hinge problem first. It’s usually a footing problem showing up through the hinges.
The second is the housing stock. Dallas has broad stretches of mid-century ranches in neighborhoods like Red Bird, Pleasant Grove, and North Dallas, where the original driveway gate was often a lightweight tube-steel panel with a padlock eye. Those gates are now 40 to 60 years old, and the steel has been worked by heat and humidity for longer than most of the gate hardware was built to survive.
Third, many Dallas neighborhoods inside Loop 12 sit under active HOA design review, and several older enclaves still have original alley-access layouts where the driveway gate is the de facto front entrance. That means finish and clearance matter as much as mechanical function. A gate that drags across a cracked approach in Oak Cliff is a clearance job, not just a hardware job. We account for that before quoting.
Our Main Dallas Services
Two problems bring in most of the Dallas calls we run: a gate that won’t open or close properly, and a motor that’s gone dead somewhere between the remote and the arm. Each service has its own page with line-item pricing and the exact process we follow.
Gate Repair in Dallas
Sagging gates, split hinges, misaligned latch bolts, rust compromises at the hinge post, and wheels that no longer carry the gate’s weight are standard Dallas repair work. On steel gates, we check the frame rails and the weld points at the hinge stiles because a gate that’s been forced open or hit by a car usually transfers damage there first. The local angle in Dallas is soil movement: a gate that scrapes the driveway in summer may be settling into clay that’s dried out and cracked, which changes how we prep repair footings. Full pricing and the repair process are on the Gate Repair in Dallas page.
Gate Installation in Dallas
A Dallas installation has to solve for two things at once: the finish expectations of a neighborhood where driveways are landscaping, and a clay soil that moves more than most installers plan for. We spec post depth and concrete by the soil conditions at the address, not by a catalog formula. That means a new gate in Lakewood gets an install plan different from one in South Dallas, even when the gate itself is identical. Options, lead times, and what a complete install includes are listed on the Gate Installation in Dallas page.
Gate Motor Repair in Dallas
When a motor runs but the gate doesn’t move, or the remote stopped working while the keypad still opens the gate, the problem is usually a limit switch, a capacitor, a control board, or a gear that’s stripped inside the operator housing. High heat shortens capacitor life, and Dallas summers run hot enough that we replace capacitors far more often here than in cooler markets. Diagnostic findings, motor-brand coverage, and repair-pricing ranges are on the Gate Motor Repair in Dallas page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dallas
We stock parts locally for the brands Dallas gates actually run on, including Viking, Ghost Controls, DoorKing, and Elite. Most common failure parts for these operators are on the truck same day. The full brand coverage and what we match is on our brands page.
Pricing for Gate Company in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Gate spring repair | $180 – $340 |
| Gate hinge replacement (set of two) | $120 – $280 |
| Latch or lock replacement | $90 – $220 |
| Gate wheel or roller replacement | $110 – $260 |
| Gate motor replacement | $650 – $1,800 |
| Circuit board replacement | $150 – $400 |
| Limit switch replacement | $110 – $280 |
| Remote or keypad programming | $60 – $180 |
| Sensor or loop detector replacement | $140 – $350 |
| Full gate installation (standard driveway gate) | $1,000 – $4,500 |
Two things move a Dallas quote upward more than anything else: access to the post footings when clay has shifted them, and motor mounts on older brick or stone piers that need custom plate work. Every price is written down and agreed before work starts. If the number changes mid-job, that’s our problem, not yours.
Call (469) 530-2485 for an exact quote. Estimates are free, and the price does not move at the door.
Neighborhoods We Serve in Dallas
Our Dallas crews cover the whole city footprint, from White Rock Lake to Grand Prairie and up through the northern corridors. Most calls are answered on site within one business day; emergencies are routed to the nearest available technician on the same run.
- Lakewood
- Pleasant Grove
- Oak Cliff
- North Dallas
- Red Bird
Service Area – Cities Near Dallas
We run Dallas-based crews, and the service boundary extends into the close neighbors when schedules line up. See our pages for Irving, TX, Duncanville, TX, Balch Springs, TX, and Mesquite, NV for coverage and pricing in those areas.
Serving Dallas, TX – Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dallas
Most Dallas repairs are scheduled within one business day. Emergency calls, like a gate stuck open or a broken spring on a shared driveway, are routed to the nearest technician the same day when one is available. Call (469) 530-2485 and we’ll give you a clear arrival window, not a four-hour range.
For repairs that keep the gate’s existing appearance, no. For a full replacement, many Dallas HOAs require design review before installation. We provide the spec sheet and dimensions you’ll need for the filing, and we’ll wait on the approval before we start. The garage of a live dispatcher won’t speed that up.
It covers everything we can see. The price on the quote is the price on the work order, parts and labor included. If we open a gate and find hidden frame damage, we stop, show you what we found, and write a new price for the added scope before touching it. The only surprise you’ll get is how fast a fully stocked truck can finish the work.
If your Dallas gate is sagging, stuck, or the motor’s gone quiet, call (469) 530-2485 now. A live person picks up, and you’ll get a written price before any work begins. That’s The Garrison Standard, and it applies to every single call we run in Dallas.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.