Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Frisco, TX
Carver Gate Repair handles gate repair, gate installation, and gate motor repair across Frisco, TX. Most homes here sit on larger lots with driveway gates that run daily, often two or three times a day during school runs and commutes. That adds up faster than homeowners expect. This page covers what Frisco jobs actually cost, which neighborhoods we serve, and how our crews work. Call (469) 530-2485 for a written quote. Each service has its own Frisco page with pricing detail, linked below.
Why Frisco Homes Are Different
Frisco is mostly newer construction. Large sections of the city were built out across the 2000s and 2010s, which means the gate motors and operators now reaching the end of their service life are LiftMaster and Viking units installed when those homes were new. We replace a lot of 15-year-old swing arms and limit switches in neighborhoods like Stonebriar, The Trails, and Newman Village before the motor burns out completely.
The soil matters here too. Frisco sits on expansive clay that shifts with North Texas weather. A gate that worked fine in dry August weather can bind or drag after heavy spring rains settle the posts. That movement throws off limit switches, bends hinges, and puts extra load on the motor. We check post alignment on every repair call because it is the most common cause of repeat failures in Frisco.
HOA requirements are another constant. Many Frisco subdivisions mandate automatic gates at entry drives and have rules about gate style, finish, and even opener type on perimeter fencing. If your HOA requires a specific design or a particular safety edge, tell us when you schedule. We match the work to what your board approved the first time.
Our Main Frisco Services
Most Frisco calls fall into two buckets: a gate that stopped working this morning, or a motor that has been failing for weeks and finally quit. Below is how each one works here, with a link to the full Frisco page for pricing specific to that job.
Gate Repair in Frisco
A gate that will not open is usually one of four things: a broken hinge, a failed limit switch, a bent track, or a dead motor. In Frisco, clay soil movement makes hinge and track problems more common than in cities with more stable ground. We carry hinge kits, track rollers, and replacement switch components on the truck, so most repairs are complete in a single visit. Every repair includes a written price before work starts and a full-year written guarantee. See Gate Repair in Frisco for line-item pricing on hinges, tracks, and other common fixes.
Gate Installation in Frisco
New gates in Frisco usually follow one of two paths: replacing an existing driveway gate, or adding a gate where there was not one before. The second path almost always involves HOA review, a concrete pad or footer, and a power run from the house to the gate. We handle the gate, the operator, the safety edges, and the wiring in one scheduled job. Because this is measured and ordered work, not an emergency call, we provide a free measure and a written price before you commit. See Gate Installation in Frisco for what a full install includes.
Gate Motor Repair in Frisco
Frisco’s newer housing stock means we see a lot of LiftMaster, Viking, and Ghost Controls operators that are 10 to 15 years old and failing in predictable ways: worn gears, failed control boards, or limit switches that have drifted out of adjustment. We diagnose the operator on site, quote the fix in writing, and stock common replacement boards and arm assemblies for faster turnaround. See Gate Motor Repair in Frisco for motor and operator pricing by brand.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Frisco
We work on Viking, Ghost Controls, DoorKing, and Elite operators, along with five other major brands. Common replacement parts for these systems are stocked on our trucks and at our Dallas-Fort Worth office, which keeps most Frisco repairs to one trip. See our brands for the full list.
Pricing for Gate Company in Frisco, TX
| Service | Typical range in Frisco |
|---|---|
| Hinge replacement (pair) | $180 – $420 |
| Limit switch repair or replacement | $140 – $320 |
| Gate sag correction | $220 – $520 |
| Track or roller replacement | $200 – $460 |
| Full gate panel replacement | $800 – $2,200 |
| Swing motor replacement | $600 – $1,400 |
| Slide motor replacement | $700 – $1,600 |
| New gate + operator package | $2,500 – $6,500 |
| Loop detector replacement | $200 – $450 |
| Safety edge or photo eye replacement | $160 – $380 |
Frisco prices run toward the upper end of these ranges when the gate is a custom iron design, when HOA specs require a specific finish, or when post movement from clay soil means we are correcting alignment before rehanging the gate. Every job is quoted in writing before any work begins, and that number does not move at the door.
Neighborhoods We Serve in Frisco
We work across the full city, from Stonebriar and Starwood on the west side to The Trails, Newman Village, and Phillips Creek Ranch on the east. Most neighborhoods fall within a 30 to 45 minute dispatch window from our Dallas-Fort Worth coordination office.
- Stonebriar
- The Trails
- Newman Village
- Phillips Creek Ranch
- Starwood
Service Area – Cities Near Frisco
Our crews also handle gate work in the communities bordering Frisco. If your gate is in Prosper, TX, Aubrey, TX, Little Elm, TX, or Celina, TX, the same written pricing and full-year guarantee apply.
Serving Frisco, TX – Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Frisco
Most Frisco calls are reached the same day. We dispatch crews from our Dallas-Fort Worth office, and typical arrival is within 30 to 45 minutes of your call. Evening and weekend calls are answered by a live person, not a voicemail box. Call (469) 530-2485 to confirm today’s window.
It can, depending on the scope. Gate repairs that match the existing design rarely need HOA review. A new gate or a full replacement with a different style may. If your HOA requires approval, we work from their approved specs and schedule the job around their review timeline. Mention any HOA requirements when you call so we plan the work correctly.
We serve the entire city, including 75034, 75035, 75036, and surrounding areas. There is no extra dispatch fee for any Frisco neighborhood. Call (469) 530-2485 for a free estimate and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Frisco Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.