Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Madera Acres, CA
We’re Carver Gate Repair, the gate company Madera Acres homeowners call when a swing gate stops swinging or a slide gate grinds to a halt. Most properties here sit on larger lots with custom steel or wrought iron gates, and the Central Valley heat and dust take a real toll on hinges, rollers, and motor electronics. A gate that won’t close isn’t a minor annoyance here, it leaves your property open to the road. Call us at (469) 530-2485 and we’ll send a background-checked technician with a written price before any work begins.
Why Madera Acres Homes Are Different
Madera Acres sits on the north side of Madera, where lots run larger and homes spread out along rural-feeling roads. That matters for gate work. A gate on a half-acre parcel is usually wider and heavier than a suburban driveway gate, which means the operator has to work harder, the hinges wear faster, and the concrete pad the motor bolts to has to be dead level. We see it constantly.
The climate adds another layer. Summer temperatures regularly cross 100 degrees, and the fine dust that blows through the San Joaquin Valley works its way into circuit boards, limit switches, and chain drives. A gate motor that would last ten years near the coast may need real attention here in half that time. We set travel limits and torque settings with that heat and grit in mind, not just to the factory spec.
Many Madera Acres properties also fall under county rather than city code, which affects setback and visibility rules for new gate installations. We handle the measurements and the paperwork conversation so your gate passes the first time.
Our Main Madera Acres Services
Most Madera Acres calls fall into two buckets: a gate that won’t move at all, or a motor that runs but doesn’t actually open or close the gate. Here’s what each one looks like in this area.
Gate Repair in Madera Acres
A sagging gate drags on the ground and burns out the motor. A bent hinge throws the whole leaf out of square. We rebuild hinge points, straighten or replace bent steel, rehang gate leaves to clear the ground, and replace worn rollers on slide gates. On rural lots in Madera Acres, we also check the posts themselves, heavy gates pull posts out of plumb over time, and no repair holds if the post is leaning. Lonnie Burke leads our crew, and the standard is simple: the gate opens smooth and closes square, every time. See Gate Repair in Madera Acres for the full breakdown.

Gate Installation in Madera Acres
A new gate on a Madera Acres property has to account for wind, sun, and soil movement. We measure the opening, spec the right post depth and concrete, and build the gate to match the existing fencing or the look you’ve drawn up. We install swing and slide gates, pedestrian gates, and the full operator package, and we set every post with the gate weight in mind, not just the opening width. Every installation includes a written price before any work starts. Details are on Gate Installation in Madera Acres.

Gate Motor Repair in Madera Acres
When the motor hums but the gate doesn’t move, the problem is usually the capacitor, the limit switch, or a stripped drive gear. When it does nothing at all, it’s often the control board or a dead power supply. We carry parts for Viking, Linear, Ghost Controls, and DoorKing systems on the truck, so a Madera Acres repair often happens on the first visit rather than waiting on a shipped part. We test the full throw of the gate and set the limits to the actual opening, not to where the last tech left them. Read more at Gate Motor Repair in Madera Acres.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Madera Acres
We work on Viking, Linear, Ghost Controls, and DoorKing systems regularly in Madera Acres, along with five other major brands. Our trucks carry common control boards, remotes, and limit switches for these brands locally, which shortens turnaround on most repairs. Browse our brands to see the full list.
Pricing for Gate Company in Madera Acres, CA
| Service | Typical range in Madera Acres |
|---|---|
| Gate repair – minor (hinge, latch, roller) | $180 – $340 |
| Gate repair – major (post reset, weld repair) | $420 – $800 |
| Swing gate operator replacement | $950 – $1,650 |
| Slide gate motor replacement | $1,100 – $1,900 |
| Gate motor control board | $280 – $550 |
| Limit switch replacement | $140 – $280 |
| Gate installation (single swing) | $2,400 – $4,500 |
| Gate installation (double swing) | $4,000 – $7,500 |
| Slide gate installation | $4,500 – $8,500 |
| Full operator kit with safety edges | $1,800 – $3,200 |
Heavier custom gates and longer slide runs push Madera Acres jobs toward the top of those ranges. What doesn’t change is the price once we quote it: the written number we hand you before work starts is the number on the invoice when we leave.
Neighborhoods We Serve in Madera Acres
We run service calls all over Madera Acres, from the rural lots off Avenue 12 to the residential streets closer to Madera proper. We’re typically on site within 24 to 48 hours for repair work.
- Madera Acres central
- Avenue 12 corridor
- Road 26 area
- North Madera Acres
- East Madera Acres
Service Area – Cities Near Madera Acres
Our Madera Acres crew works this city every day, and we cover the broader region for larger installation projects. If you’re in Los Angeles, CA, San Diego, CA, San Jose, CA, or San Francisco, CA, the same Garrison Standard applies: written prices, background-checked technicians, and a guarantee in writing on every repair.
Serving Madera Acres, CA – Our Local Coverage Area
We’re based in the Madera Acres area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Madera Acres
We answer the phone live around the clock, and for repair work in Madera Acres we typically have a technician on site within 24 to 48 hours. Emergency calls get priority scheduling, and we’ll tell you the arrival window when you call (469) 530-2485.
Many Madera Acres properties fall under county jurisdiction rather than city, and the rules vary by fence height, gate position, and whether there’s an automatic opener. We’ll sort out what applies to your property during the measure, before any work is scheduled.
Every repair carries a 365-day written guarantee. If the same issue returns inside that year, we make a second visit at no charge and fix it. That’s the Garrison Standard, and it’s printed on the paperwork, not just said on the phone.
Call (469) 530-2485 for a free estimate on any gate, motor, or installation work in Madera Acres. A live person answers, and the price you’re quoted is the price you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Madera Acres Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.





Before
After
Before
After
Before
After