Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Brier, WA
Gate systems in Brier fail differently than they do in Seattle or Lynnwood. The lots are larger, the driveways slope in ways that stress hinge posts, and the wet winters keep gate operator circuit boards working harder than they should. Carver Gate Repair handles the full range of gate work here, from a sagging swing gate to a dead motor on a Viking or DoorKing system. Every job starts with a written price before any work begins, and every repair carries a written guarantee good for a full year. Call (469) 530-2485 and a live person answers, day or night.
Why Brier Homes Are Different
Brier is a small residential city north of Bothell, and most properties sit on quarter-acre to half-acre lots with mature evergreens tight against the driveway. That tree cover is the first thing that changes gate work here. Needles and cones collect inside slide gate tracks, and moss builds on gate opener arms through the wet months from October to April. A gate that works fine in August can bind up by November because the wood swells and the track fills with debris that never dries out.
The housing mix matters too. A good share of Brier homes were built between the 1960s and early 1990s, and many of the original gates and chain-drive operators are still in place. Homeowners often call us for what sounds like a dead motor, and the actual problem is a rusted hinge post or a control board that has been wet for a decade. Terrain is the other factor. Several streets climb noticeably, and a gate installed on a slope puts constant lateral force on the hinge side. We adjust for that on every repair.
Our Main Brier Services
Most Brier calls come in for one of two reasons: a gate that no longer opens or a motor that stopped responding. The three services below each have their own Brier page with deeper detail and pricing.
Gate Repair in Brier
Most Brier repair calls involve a gate that has drifted out of alignment, a hinge post that has shifted in wet soil, or a slide gate that jams partway open. We arrive, diagnose the exact failure, and give you the written price before touching anything. No estimate that grows once the work is open. Read the full breakdown on the Gate Repair in Brier page.
Gate Installation in Brier
New gate installations in Brier need to account for slope, soil drainage, and the width of the driveway. We measure on site, order the right posts and hardware, and set everything with concrete below the frost line. You get a written price that includes materials, labor, and the full-year guarantee. See Gate Installation in Brier for what a full install includes.
Gate Motor Repair in Brier
When an operator stops responding, the cause is usually one of three things: a failed limit switch, a shorted control board, or a loop detector that no longer senses a vehicle. Our technicians are trained on the nine major motor brands and carry common Brier parts on the truck. Details are on the Gate Motor Repair in Brier page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Brier
We service Viking, Ghost Controls, DoorKing, and Elite operators, plus five other major brands. Common control boards, limit switches, and remotes are stocked on our Seattle-based service trucks that cover Brier routes, so most motor repairs are completed in one visit. See our brands page for the full list.
Pricing for Gate Company in Brier, WA
| Service | Typical range in Brier |
|---|---|
| Gate repair, minor (hinge adjustment, latch, track clean) | $125 – $275 |
| Gate repair, major (weld, post reset, full realignment) | $325 – $650 |
| Gate operator diagnostic fee | $89 (waived with repair) |
| Gate motor replacement | $650 – $1,900 |
| Control board replacement | $280 – $520 |
| Limit switch replacement | $180 – $315 |
| Loop detector replacement | $240 – $480 |
| Remote or keypad programming | $85 – $150 |
| New slide or swing gate installation | $2,800 – $9,500 |
Brier pricing runs toward the middle of those ranges when a gate sits on a slope, when posts need resetting in saturated soil, or when an older operator needs three or four parts instead of one. Every job gets a written price up front, and the number does not move once you approve it.
Neighborhoods We Serve in Brier
We cover the full Brier city boundary and the surrounding streets that share the 98036 ZIP. Response time is typically same day for most repair calls, with a two-hour arrival window given when you book.
- Brier city center and 236th St SW corridor
- East Brier near Larch Way
- North Brier along 228th St SW
- Briarwood and the neighborhoods bordering Mountlake Terrace
Service Area – Cities Near Brier
Carver Gate Repair schedules Brier work from the brand’s Seattle office, with crews dispatched to Brier daily. We also serve Seattle, WA, Tacoma, WA, Spokane, WA, and Vancouver, WA through our regional locations.
Serving Brier, WA – Our Local Coverage Area
We’re based in the Brier area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brier
Same day in most cases. We dispatch a technician to Brier with a two-hour arrival window, and the phone is answered by a live person 24/7, including weekends. Call (469) 530-2485 and we will tell you the next available window before you hang up.
Most repair work does not require a permit. New installations that involve significant structural work or any electrical run may need city approval, and we will tell you during the estimate whether a permit applies to your job. We handle the paperwork when one is required.
We diagnose the issue, then give you a written price for the repair or installation before any work starts. That number is the number you pay. If something changes mid-job, we stop and get your approval for any additional work. No surprises at the end. Call (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brier Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.