Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Coconut Creek, FL
Coconut Creek homeowners need a gate company that understands how South Florida’s humidity, salt air, and afternoon storms affect gate hardware and motors. Corrosion, limit-switch drift, and HOA compliance all play bigger roles here than in drier parts of the state. Carver Gate Repair is the gate specialist for Coconut Creek, with technicians trained on nine major motor brands and a written guarantee on every repair. If a swing gate won’t close or a slide gate grinds halfway, call (469) 530-2485 and a live person answers.
Why Coconut Creek Homes Are Different
Coconut Creek is an inland Broward County city with no beachfront, but it sits less than six miles from the Atlantic, so salt-laden air still reaches gate electronics and hardware. Powder-coated steel and galvanized hinges corrode faster here than homeowners expect, and we regularly replace rusted hinge bolts and pitted track rollers in communities like Winston Park and the Township. Many Coconut Creek neighborhoods are master-planned with active HOAs, and those associations often require gate repairs to match the original finish and style. We factor that in before we start work.
The city’s terrain is flat but water sits high in summer, which means gate posts set in low-lying yards shift more than they would on higher ground. A post that moves a half inch is enough to throw a swing gate out of alignment so the limit switch never trips. We see more weather-related electrical issues in Coconut Creek between June and October than at any other time, especially lightning damage to loop detectors and control boards.
Our Main Coconut Creek Services
Coconut Creek homeowners call us most often for two reasons: a gate that stopped opening, and a gate that needs to be replaced after years of Florida weather. Each service has its own page with pricing and detail.
Gate Repair in Coconut Creek
A Coconut Creek repair usually involves the gate itself rather than the motor: bent hinges, sagging welds, broken rollers, or a panel that scrapes the driveway because the ground settled. Our technicians assess the full gate system, not just the visible symptom, then hand you a written price before any work starts. Gate Repair in Coconut Creek covers what we fix most often here and what it typically costs.
Gate Installation in Coconut Creek
New gate installations in Coconut Creek often come with HOA approval requirements, and the association’s architectural committee needs to know material, color, and style before approving the project. We provide the specifications needed for that submission and install aluminum gates that hold up to South Florida humidity without the rust problems of raw steel. Gate Installation in Coconut Creek explains what’s included and what to budget.
Gate Motor Repair in Coconut Creek
Gate motors in Coconut Creek fail in predictable ways: worn capacitor, failed limit switch, water intrusion into the control board, or a loop detector that stopped sensing vehicles. The humidity eats connections faster than the mechanical parts wear out. We stock parts for LiftMaster, FAAC, BFT, Linear, Viking, and other common systems so many motor repairs are completed the same visit. Gate Motor Repair in Coconut Creek details the most common failures and what they cost to fix.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Coconut Creek
We work on FAAC, BFT, Linear, and Viking systems, among the nine brands our technicians train on. We keep common parts for these brands stocked so a Coconut Creek motor repair doesn’t stall waiting on a shipped component. See our brands for the full list.
Pricing for Gate Company in Coconut Creek, FL
| Service | Typical range in Coconut Creek |
|---|---|
| Gate repair (general) | $250 – $1,800 |
| Gate motor repair | $300 – $1,400 |
| Gate installation (new) | $2,500 – $8,500 |
| Single swing gate install | $2,500 – $5,500 |
| Double swing gate install | $4,000 – $8,500 |
| Slide gate install | $3,500 – $7,500 |
| Motor replacement | $600 – $1,400 |
| Limit switch replacement | $180 – $350 |
| Loop detector replacement | $250 – $500 |
| Hinge replacement | $250 – $600 |
| Track and roller replacement | $300 – $900 |
| Control board repair | $250 – $650 |
What pushes a Coconut Creek gate job toward the higher end of these ranges is usually corrosion. Salt air plus summer rain means stubborn bolts, rusted fasteners, and extra fabrication time. Whatever the job needs, you get a written price before any work begins, and that number doesn’t move once we start.
Neighborhoods We Serve in Coconut Creek
We run calls across the city, from the older sections near Coconut Creek Parkway up to the newer communities off Wiles Road. Most neighborhoods fall within a short drive of our dispatch point, and we schedule repair visits the same day in most cases.
- Winston Park
- The Township
- Banyan Trails
- Caribou
- Coco Parc
Service Area – Cities Near Coconut Creek
Our Coconut Creek crews also cover the surrounding Broward County cities. If you’re just over the line, we likely serve your area too: Margate, FL, Pompano Beach, FL, Coral Springs, FL, and Deerfield Beach, FL. Dispatch and scheduling are coordinated from our Miami area office.
Serving Coconut Creek, FL – Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Coconut Creek
We answer calls 24/7 with a live person, not a voicemail queue. For most Coconut Creek repairs, a technician can be at your home the same day you call, often within a few hours depending on the time and the neighborhood.
Repairs that match the existing gate’s material and finish generally don’t need approval. New installations often do. If your Coconut Creek HOA requires documentation, we provide the material, color, and style specifications your community’s architectural committee will ask for.
Every repair Carver Gate Repair performs in Coconut Creek carries a written 365-Day Done Right Promise. If the same problem returns within one year of service, we come back at no charge.
If your gate is down in Coconut Creek, don’t wait through another no-show. Call (469) 530-2485 for a free estimate and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coconut Creek Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.