Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Plantation, FL
Carver Gate Repair is the gate company Plantation homeowners call when a swing gate stops closing or a slide gate jumps its track. We work exclusively on gates and gate motors across Plantation, from the 1950s ranch neighborhoods east of University Drive to the gated communities west of Hiatus Road. Most Plantation jobs involve salt-air corrosion on hinges, sun-baked circuit boards, and older steel frames that have shifted in the sandy soil. Scheduling runs through our Miami office, and you can reach a live person at (469) 530-2485 any hour.
Why Plantation Homes Are Different
Plantation’s gate work carries a few fingerprints you won’t find in Weston or Davie. The city skews older than most Broward suburbs – much of the housing between Broward Boulevard and Sunrise Boulevard went up between 1955 and 1975. Those homes often have original driveway gates, or gates added during a 1980s renovation, and the steel has decades of humidity baked into it. We regularly replace hinge posts in Plantation that have rusted at the base where sprinkler overspray hits them every night.
The soil here matters too. Plantation sits on sandy, fast-draining ground that shifts with the wet and dry seasons. A gate that dragged slightly in March will be binding by June. That means our crews check post plumb and hinge alignment before we touch a motor, because a motor burning out is usually the symptom, not the cause. And in the gated sections off Old Hiatus Road and Nob Hill Road, board requirements often dictate gate style and finish. If an HOA is involved, any replacement gate or operator usually needs architectural review. We quote accordingly – never before we understand what will pass review.
Our Main Plantation Services
Most Plantation homeowners reach us for one of three reasons: a gate that won’t open, a gate that needs replacing, or a motor that runs but won’t move the gate. Each has its own page below with local pricing and the specifics of how we handle the job here.
Gate Repair in Plantation
Repair is the most common call from Plantation, and the work is rarely a mystery. We see welded hinges cracked from years of heat and rain, sagging gate frames dragging across concrete, and wheels seized on rusted bearings. On slide gates, the telltale is usually a limit switch failing or a chain that has stretched past adjustment. We arrive with a stocked truck, a written price before we start, and we leave the gate moving like it should. Full details on the Gate Repair in Plantation page.
Gate Installation in Plantation
A new gate in Plantation means accounting for the property line, the driveway slope, and the HOA rulebook where one applies. We measure twice, order the gate to the opening, and set posts below the shifting topsoil where the footing stays stable. Whether it’s a driveway swing gate in Plantation Acres or a smaller pedestrian gate in Lauderdale West, the installation is quoted as one written number before any materials are ordered. See the Gate Installation in Plantation page for how we run the job.
Gate Motor Repair in Plantation
Florida humidity and daily use are hard on gate motors, and Plantation is no exception. We troubleshoot the whole system: board, battery, limit switch, loop detector, and the arm or piston doing the physical work. If the motor can be repaired, we repair it. If it needs replacement, we carry or can quickly source operators from FAAC, LiftMaster, BFT and the other brands we service. The Gate Motor Repair in Plantation page covers the process and pricing in depth.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Plantation
We service FAAC, BFT, Linear, and Viking operators day to day in Plantation, plus LiftMaster, DoorKing, and Ghost Controls. Common parts – limit switches, loop detectors, remotes, and control boards – are stocked in our trucks. If we have to order a part, we say so up front and give a realistic arrival window. Our brands page lists every system we work on.
Pricing for Gate Company in Plantation, FL
| Service | Typical range in Plantation |
|---|---|
| Gate repair (minor – hinge, wheel, alignment) | $140 – $325 |
| Gate repair (major – frame weld, post reset, track work) | $315 – $750 |
| Slide gate track replacement | $390 – $820 |
| Gate motor repair | $250 – $475 |
| Control board replacement | $280 – $520 |
| Limit switch replacement | $115 – $210 |
| Loop detector replacement | $175 – $340 |
| Full gate operator replacement (motor and arm) | $1,350 – $2,400 |
| New driveway gate installation (standard steel, manual) | $1,700 – $3,200 |
| New driveway gate installation with operator | $3,500 – $6,500 |
| Welding repair (per repair area) | $145 – $300 |
The two factors that push Plantation prices up most are post replacement in sandy soil and HOA-required finishes that cost more than raw steel. Whatever the job, the price is written and agreed before we open a toolbox. Nothing about that changes once work begins.
Neighborhoods We Serve in Plantation
We cover all of Plantation, from the older subdivisions east of University Drive to the larger lots and private roads near the western city line. Our crews know the gate styles and board expectations in each area.
- Plantation Acres
- Lauderdale West
- Jacaranda
- Plantation Gardens
- Country Club Estates
Most of Plantation is within a 30-minute dispatch from our South Florida crew base, and emergency calls get handled as quickly as the schedule allows.
Service Area – Cities Near Plantation
Beyond Plantation, our crews cover the surrounding Broward communities. If your gate is in Fort Lauderdale, FL, Margate, FL, Coconut Creek, FL, or Pompano Beach, FL, the same written-price standard applies. Call us and we’ll tell you straight whether we can get a truck to you the same day.
Serving Plantation, FL – Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Plantation
Emergency calls in Plantation are typically reached within 30 to 45 minutes. A non-emergency repair can be scheduled around your day, not our convenience. Either way, we give you an arrival window before we dispatch. Call (469) 530-2485 and a person answers.
If your home sits in a Plantation HOA, a new gate or operator usually needs approval before installation. Repairs to existing equipment typically don’t. We help you understand what to submit and we won’t quote a new gate without knowing what approval looks like. Call for a straight answer.
Plantation jobs are handled by a small, background-checked crew assigned to Broward, so repeat visits are usually the same faces. Every visit still includes a written price and a uniformed technician who explains what they found. Call (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plantation Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.