Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Felida, WA
Carver Gate Repair is the gate company Felida homeowners call when a gate stops opening, sags on its hinges, or needs replacing outright. We work exclusively on gates and gate motors, and we dispatch background-checked, uniformed technicians to every job. If you need Gate Repair in Felida, call (469) 530-2485 and a live person answers, day or night.
Why Felida Homes Are Different
Felida sits on the north edge of Vancouver, Washington, where lots tend to be larger than what you find closer to the city core. Many properties run a quarter acre or more, and a good number have custom driveway gates set back from the street. That changes the work in two ways. First, most Felida gates are swing gates rather than sliders, which means hinge posts, articulating arms, and swing operators do the heavy lifting. Second, the distance from the house to the gate often means the operator has to handle a longer power run or rely on a battery-backed system. When we quote a job here, we always look at how the gate sits on the property before putting a number in writing.
Weather is a factor, too. Felida gets real rain from October through May, and moisture works its way into limit switches, loop detectors, and circuit boards faster than homeowners expect. A gate that works fine in August can fail on the first cold, wet morning in November. We see it every season. The housing stock is mostly single-family homes built from the 1980s forward, so gate systems range from twenty-year-old operators that need new capacitors to newer smart-enabled motors that need a firmware update and a fresh loop detector. The terrain is gentle enough that drainage is manageable, but any gate post set without proper gravel and concrete backfill will shift within a few years. We check for exactly that.
Our Main Felida Services
Most calls from Felida fall into three categories: a gate that will not open, a gate that needs to be replaced, and a motor that quit. Each has its own page with pricing, local detail, and what to expect.
Gate Repair in Felida
When a Felida homeowner’s gate drags on the ground, leans against its hinges, or will not latch, the cause is usually one of three things: a worn hinge, a post that has shifted, or an operator pulling the gate out of alignment. We dispatch a technician who diagnoses the problem before quoting a repair, and the written price covers the work as it will actually be done, not an estimate that grows once the gate is open. Weld repairs, hinge replacements, and post re-setting are all common here. See Gate Repair in Felida for the full breakdown and local price ranges.
Gate Installation in Felida
New gate installations in Felida usually mean a custom steel or aluminum gate matched to an existing fence line, plus an operator if the homeowner wants automation. We measure on site, confirm gate weight and hinge direction, then provide a written installation price that includes the gate, hardware, and any concrete work for the posts. Vancouver-area code requires proper post depth, and we set posts below the frost line with gravel drainage at the base. For what a full installation costs in this market, see Gate Installation in Felida.
Gate Motor Repair in Felida
A gate motor that hums but does not move, resets itself, or trips a breaker is usually failing at the limit switch, the capacitor, or the control board. We carry parts for the brands most common in Felida, including Viking, Ghost Controls, and DoorKing. If the motor cannot be repaired, we quote a replacement motor with a written price before any work starts. See Gate Motor Repair in Felida for motor-specific costs and what our Felida technicians check first.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Felida
We work on Viking, Ghost Controls, DoorKing, and Elite gate operators, among others. Our technicians keep common Felida parts on the truck, including limit switches, capacitors, and control boards for these motors. See our brands for the full list of what we service and stock.
Pricing for Gate Company in Felida, WA
| Service | Typical range in Felida |
|---|---|
| Gate repair service call | $120 – $220 |
| Standard gate repair | $280 – $600 |
| Heavy-duty gate repair | $500 – $1,000 |
| Gate motor repair | $300 – $650 |
| Gate motor replacement | $650 – $1,600 |
| Wrought iron gate repair | $350 – $800 |
| Automatic gate opener repair | $300 – $700 |
| Commercial gate repair | $500 – $1,200 |
| Gate hinge replacement | $250 – $600 |
| Gate wheel replacement | $150 – $400 |
| Gate post repair | $300 – $700 |
| Full gate installation | $1,800 – $6,500 |
Prices in Felida tend to run toward the middle of these ranges. The factors that push a job higher are gate weight, post condition, and how far the operator sits from a power source. Every customer receives a written price before any work begins, and that number does not move at the door.
Neighborhoods We Serve in Felida
We work throughout Felida and the surrounding north Vancouver area. Response time for most repair calls is same-day or next morning, depending on when you call and what parts the gate needs.
- Felida Ridge
- Felida Meadows
- North Salish
- Ridgefield Junction area
- Salmon Creek border streets
Service Area – Cities Near Felida
While this page focuses on Felida, our crews also cover the broader region. We handle gate and motor work in Vancouver, WA, and for customers further north we serve Seattle, WA and Tacoma, WA. On the east side of the state, we cover Spokane, WA as well. Dispatch and scheduling are coordinated from our Seattle office, and local crews serve Felida directly.
Serving Felida, WA – Our Local Coverage Area
We’re based in the Felida area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Felida
Most Felida repair calls get same-day or next-morning service, depending on when you call and whether the gate needs parts we do not already have on the truck. Emergency calls are answered by a live person 24 hours a day. Call (469) 530-2485 and we will give you a straight arrival window, not a four-hour guess.
Some Felida subdivisions have covenants that specify gate height, material, and finish. We ask you to check your HOA documents before we install, and we will match the gate to whatever the covenants require. The installation price we quote includes the gate and the work; HOA paperwork is between you and your association.
Yes. Every job in Felida gets a written price before any work starts. That price covers the full repair or installation, and it does not change unless you approve a change order in writing first. This is part of The Garrison Standard, and it applies to every call we run.
Every repair carries a written guarantee good for a full year from the date of service. If the gate fails inside that window for the same reason we fixed it, we come back at no charge. That is the 365-Day Done Right Promise, and it is in writing on every repair invoice we leave.
If your gate is down in Felida, call (469) 530-2485. A live person answers, and the price you are quoted is the price you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Felida Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.