Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fresno
A new driveway gate in Fresno typically costs $2,800 to $9,500 installed, depending on the gate size, material, and whether you’re adding an operator and safety system. Most standard swing gate installations take one to two full days on site, plus a few days for concrete footings to cure before the gate is hung. If you’re calling around Fresno right now, you want a straight answer on price and a crew that shows up when they say they will. That’s what we do. Call (469) 530-2485 and you’ll get a live person, not a voicemail tree.
We work all over Fresno, from the quiet streets of Sunnyside to the newer acreage lots off Trammel Fresno Road, and we know what the soil here does to a gate that was set wrong. Our service pages cover the full scope of our work, and we’ll be direct with you about what your property actually needs.
Why Carver Gate Repair Is Fresno’s Preferred Gate Installation Company
Fresno homeowners have dealt with enough contractors who quote one price over the phone and show up with a different number at the door. That’s not how we operate. Every job we do starts with a written price, delivered before any work begins. The number doesn’t move once work starts. That’s the Garrison Standard, and it’s applied to every gate we install in Fresno, whether it’s a 10-foot pedestrian gate or a 20-foot sliding driveway gate with a Viking operator.
Lonnie Burke leads our crews, and every technician that arrives at a Fresno home is background-checked and in uniform. You’ll know exactly who’s walking onto your property before they ever set foot past your fence line. Our phones are answered by a live person around the clock, seven days a week. If you call at 11 p.m. or 6 a.m., you’re talking to a human being who can schedule service, not a call-back queue.
We’re part of the Garrison Partners family, and we’ve been operating to the same standard since 2008. Every repair carries a written 365-day guarantee. If it fails inside that window, we come back a second time at no charge, no argument. That guarantee applies to installations too. We stand behind the work we do in Fresno, and we put it in writing.
Gate Opener Installation in Fresno
Gate opener installation in Fresno means mounting a motorized operator onto a new or existing gate, running dedicated power to it, wiring safety devices, and testing the whole system under load. In a city where July afternoons regularly push 105°F, a gate opener wired into an undersized or shared circuit is going to trip its breaker exactly when you’re trying to get your car into the driveway. We’ve seen it repeatedly around Fresno, and the fix is a dedicated circuit sized to the operator’s current draw. A full opener installation with safety photocells and edge sensors on a swing gate runs $1,400 to $3,200, including the operator.
Operator sizing and mounting
An opener that’s too small for a heavy steel gate will burn out its limit switch or strip the drive gear within a season or two. We match the operator to the gate’s actual weight and travel distance, not just its width. Swing arm operators, slide operators, and underground linear operators each have different requirements, and we’ll tell you honestly which one your setup needs.
Wiring and power work
Many Fresno homes with existing automatic gates were wired years ago, often with undersized conduit or no dedicated breaker. When we install a new operator, we verify the circuit, the grounding, and the disconnect. If the power feed isn’t correct, the opener will work fine in the mild weeks and fail you on a 100-degree afternoon.
Gate Fabrication in Fresno
Gate fabrication in Fresno is what happens when an off-the-shelf gate won’t fit your opening, your style, or your soil conditions. We build steel frames to your driveway’s exact dimensions, whether you need a single swing, a double swing, or a slide gate on a track. A custom fabricated steel swing gate in Fresno with a powder-coat finish typically runs $2,200 to $6,000 for the gate itself, before the operator and installation labor. For a full package, gate, posts, operator, and safety system, plan on $4,500 to $9,500.
Steel frame construction
We build gates from structural steel tube, not thin ornamental sections that flex under their own weight. A 12-foot gate with a heavy wood or aluminum inlay needs a rigid frame or it’ll sag from the hinge side. We weld, not bolt, the critical joints.
Powder coating and finish work
Fresno’s sun is hard on paint and cheap finishes. We send fabricated gates through a powder-coat process that stands up to UV, rain, and the dust that settles on everything out here. Custom colors and wood-look inlays are available if your HOA or your eye demands them.
Trusted Brands We Service in Fresno
Our technicians are factory-trained on the systems already installed at Fresno homes. We work on Viking and Ghost Controls sliding gate operators frequently, along with DoorKing and Elite systems on commercial and larger residential properties. Because we focus exclusively on gates and gate motors, we carry the common parts for these brands in our local stock. That means a failed limit switch in your Viking operator doesn’t turn into a week-long parts wait. Call (469) 530-2485 and tell us what brand you have; we’ll know what to bring.
Common Gate Installation Problems We See in Fresno Homes
- Hinge posts heaved by expansive clay. Fresno sits on heavy clay that swells when it rains and shrinks when it dries. Posts set in a thin concrete collar or a hole only 18 inches deep will move within a season or two, and that movement is exactly what makes a swing gate sag and drag.
- Operators on shared circuits tripping breakers. A gate motor pulling inrush current on a circuit shared with exterior lighting or a pool pump will trip when the heat push is on. We run dedicated circuits when we install.
- Missing or misaligned safety photocells. UL 325 requires secondary entrapment protection on automatic gates, and many Fresno gates we see don’t have it, or the sensors are pointed at each other but never tested. If the gate won’t reverse when a car or a kid crosses its path, that’s a code violation and a liability.
- Slide gates without proper track or loop installation. A slide gate set without a proper post footing or with a loop detector placed too close to the travel path will false-hold or run through its travel limits. The gate ends up grinding or slamming, and the motor burns out twice as fast.
Pricing for Gate Installation in Fresno, TX
Here’s what Fresno homeowners can expect to pay for gate installation. A basic single-swing driveway gate with a manual latch starts around $2,800. A double swing gate with a Viking or Ghost Controls operator, safety eyes, and a keypad typically lands between $5,500 and $8,500. A slide gate on a track with a dedicated power run, loop detector, and full UL 325 safety package runs $6,000 to $9,500. What moves the price is gate width, material weight, operator type, and whether the post footings need to be pulled and re-poured, which they often do in Fresno’s clay. Every quote is written and delivered before work starts. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Fresno
Our crews work across the corridor, and we regularly handle Gate Installation projects for homeowners in Missouri City, Manvel, Stafford, and Sugar Land. If you’re just outside Fresno proper, we still cover your area with the same written pricing and the same guarantee. See Fresno for local service details.
Serving Fresno, TX – Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fresno
No. A gate installation, done correctly, requires measured fabrication or delivery of stock components, pouring and curing concrete footings, running power, and testing the safety system. That’s a multi-day job, not a same-day dispatch. What we can do is schedule a free on-site estimate quickly, often within one to two business days for Fresno addresses. Call (469) 530-2485 and we’ll get you on the schedule.
Almost every sagging gate we see in Fresno traces back to the footing. The clay here swells and shrinks with the seasons, and a post set in thin concrete or a shallow hole gets worked loose within a couple of years. Once the hinge post moves, the gate sags from the hinge side and drags. The fix is pulling the old post, digging a deeper hole, and pouring a properly reinforced footing that extends below the active clay layer.
Yes. UL 325, which governs gate operator safety in the United States, requires secondary entrapment protection devices: photocells, edge sensors, or both, depending on the operator type and installation. A gate without them is a code violation and a serious liability. Every gate and opener we install in Fresno includes safety devices and full reversal testing before we hand over the remotes.
We install and service nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Fresno homes, Viking and Ghost Controls are the most common on residential swing and slide gates. We stock common parts for these brands locally, so repair and installation work moves faster.
If the gate motor hums but won’t move, or trips its breaker daily, that’s usually a failed capacitor or a wiring fault, repairable in one visit. If the gearbox is stripped, the limit switches are burned out repeatedly, or the operator is more than 12 years old and undersized for the gate, replacement usually costs less long-term than repeated repairs. A technician can diagnose it on site and give you a written price before any work begins. Call (469) 530-2485 to schedule.
What a Correct Gate Installation in Fresno Actually Involves
Here’s the part most Fresno homeowners never hear until after a gate has gone wrong. A correct installation isn’t just hanging a gate on posts and wiring an opener. It starts with the footing. In Fresno’s expansive clay, a gate post needs a hole deep enough to get below the zone that moves with moisture, and enough reinforced concrete to anchor the post against the torque of a heavy swing gate. That’s the one local insight that separates a gate that works for a decade from one that sags in 18 months.
We hit that point hard because we’ve seen the alternative too often. A homeowner off Peach Avenue near Sunnyside had a 12-foot swing gate sagging so badly it dragged the ground. We found the hinge post had heaved out of its original shallow footing. We pulled the post, poured a deeper reinforced footing, fabricated a new steel frame, and installed a LiftMaster gate operator with safety photocells and reversal testing before we handed over the remotes. Two rainy seasons later the gate still swings clean and clears the driveway by inches.
After the footing comes the power. We run a dedicated circuit to the operator, sized to the motor’s draw, with proper conduit and a disconnect. Then the safety system: photocells positioned to cover the full travel path, edge sensors where the geometry requires them, and a full reversal test under load. The last step is programming the remotes, the keypad, and any vehicle-detection loops, then walking you through the operation and handing you the written guarantee. Dispatch and scheduling for Fresno work are coordinated from our Houston office; crews serve Fresno locally.
If you’ve got a gate that failed, or you’re planning a new one, call (469) 530-2485. We’ll give you a straight written price and a schedule we stick to. That’s the way it should work.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Fresno and the surrounding area.