Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fresno, TX
Carver Gate Repair handles gate and motor work across Fresno, TX, from swing gates on acreage lots near Trammel Fresno Road to light-duty driveway gates in newer subdivisions. Fresno sits in Fort Bend County with a mix of rural properties, HOA-governed communities, and newer construction, which means gate systems here see a wider range of equipment than most suburbs. Soil movement in this part of the county is a regular factor in gate alignment and operator life. If you need a written price on gate work in Fresno, call (469) 530-2485.
Why Fresno Homes Are Different
Fresno is a small, unincorporated community in Fort Bend County where lot sizes vary sharply from one street to the next. A gate on a two-acre property off Trammel Fresno Road works harder than one on a quarter-acre lot in a newer subdivision. Long driveways mean operators cycle more often, and the heavy clay soil common across Fort Bend County shifts with wet and dry seasons. That movement pulls gate posts out of plumb, which strains hinges, striker plates, and motor mounts. A gate that was perfectly square six months ago may now drag or bind.
Many Fresno properties fall under HOA rules that dictate gate height, finish, and even operator type. Homeowners replacing an existing gate usually need to match the community standard, which affects material choice and installation time. For properties without an HOA, local practice tends toward steel and ornamental iron gates sized for wider driveway openings, often paired with a swing operator rather than a slide track. We account for those conditions when we quote work here.
Our Main Fresno Services
Most calls we take from Fresno homeowners fall into three categories: a gate that will not open, a gate that needs to be replaced, or a motor that runs but will not move the gate. Each service has its own Fresno page with pricing, timelines, and detail.
Gate Repair in Fresno
A sagging or binding gate is the most common repair call in Fresno. Hinges wear, posts drift in clay soil, and striker plates loosen on gates that cycle multiple times a day. Our technicians check hinge alignment, post plumb, and weld points before quoting. The written price covers the specific repair, not an open-ended hourly estimate. See Gate Repair in Fresno for typical ranges and what we fix.
Gate Installation in Fresno
New gate work in Fresno starts with the driveway, not the gate panel. Wider rural openings need a different frame and hinge set than a standard suburban opening. We measure on site, order to the existing posts when they are sound, and set new posts when they are not. Every installation quote includes the gate, hardware, and a written price before any order is placed. See Gate Installation in Fresno for what a full install includes.
Gate Motor Repair in Fresno
Motor failures in Fresno tend to show up as a humming operator, a partial open, or a gate that reverses mid-cycle. Limit switches, loop detectors, and control boards fail in predictable ways, and we troubleshoot them by brand and model before recommending a repair or replacement. A motor that is underpowered for a heavy ornamental gate on a long Fresno driveway is a common root cause. See Gate Motor Repair in Fresno for what we diagnose and replace.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
We work on Linear, Viking, Ghost Controls, and DoorKing equipment in Fresno, among other brands, and we carry common parts for those systems in our Houston parts stock. That means a limit switch or control board replacement for a Viking or DoorKing operator is usually a one-trip job here, not a parts-order-and-return. See our brands for the full list of equipment we service.
Pricing for Gate Company in Fresno, TX
| Service | Typical range in Fresno |
|---|---|
| Gate realignment (hinge adjustment, post shim) | $180 – $340 |
| Hinge replacement (welded or bolted) | $220 – $475 |
| Gate post reset (underground sleeve or concrete) | $550 – $1,250 |
| Striker plate or latch repair | $140 – $280 |
| Swing gate operator replacement | $1,100 – $2,400 |
| Slide gate motor replacement | $1,300 – $2,800 |
| Control board replacement | $320 – $680 |
| Limit switch replacement | $200 – $420 |
| Loop detector replacement | $300 – $600 |
| Full gate installation (single swing, steel) | $2,800 – $11,000 |
Prices in Fresno run higher on properties with long driveways and heavy ornamental gates, because the operators and hinges have to be sized correctly for the load. Before any work starts, you get a written price covering the job, and that number does not move at the door.
Neighborhoods We Serve in Fresno
We cover Fresno and the surrounding acreage communities without a trip charge on scheduled visits. Response time inside Fresno proper is generally same-day or next-day for repairs, with emergency calls dispatched from our Houston operations center. The areas below are representative, not a complete list.
- Fresno town center and Trammel Fresno Road corridor
- Teal Run and surrounding subdivisions
- Properties along FM 521 and SH 6 frontage
- Acreage lots east toward Arcola
- Unincorporated Fort Bend County lots south toward Iowa Colony
Service Area – Cities Near Fresno
Our crews working in Fresno also cover Missouri City, TX, Manvel, TX, Stafford, TX, and Sugar Land, TX. Scheduling and dispatch are coordinated from our Houston office, with technicians routed to Fresno jobs directly. If your property is outside Fresno proper, call (469) 530-2485 and we will confirm coverage.
Serving Fresno, TX – Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fresno
Repair calls in Fresno proper are typically same-day or next-day. Emergency gate failures, such as a gate stuck open or a motor that will not engage, are dispatched around the clock. Call (469) 530-2485 and a live person will schedule the visit.
If your Fresno property is in an HOA-governed community, approval is usually required before a gate style or height changes. We install to your HOA’s stated specifications once approval is in hand. The written quote will reflect the approved design.
Yes. Fresno and the unincorporated land around it include acreage properties with wider driveway openings and heavier gates. We measure on site and size the gate, hinges, and operator to the actual opening and soil conditions. Estimates are free, and the written price includes everything before work begins.
For a free estimate on gate work in Fresno, call Carver Gate Repair at (469) 530-2485. A live person answers, and every job gets a written price, a written guarantee on repairs, and a technician who is background-checked and uniformed before they step onto your property.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.