Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Missouri City, TX
Gate repair in Missouri City means working on a specific kind of property: long driveways, brick-and-iron driveway gates, and motors that run several times a day in heat and humidity that are hard on electronics. Carver Gate Repair is the gate company homeowners here call when a gate stops opening or a motor starts grinding. We send background-checked, uniformed technicians who write down the price before any work starts. If you need someone out today, call (469) 530-2485.
Why Missouri City Homes Are Different
Missouri City spreads across Fort Bend County with a mix of 1970s and 1980s subdivisions, newer master-planned communities, and older established streets near Cartwright Road and Texas Parkway. Many homes sit on lots large enough for double driveway gates, which means two operators on one system rather than the single swing arm you see on smaller urban properties. The soil here is also a factor: Fort Bend clay expands and contracts with rain and drought, so gate posts that were never set deep enough will drift over time. A gate that scrapes the driveway or binds at the latch in July may have been set years ago in softer conditions. We see this regularly on both swing and slide gates, and the fix is usually a post reset paired with re-leveling the operator, not just adjusting the hinge.
The other local variable is storm season. Heavy spring rain and Gulf humidity shorten the life of electronics that sit outside in metal boxes with poor seals. Capacitors swell, control boards corrode, and limit switches get moisture inside. When a Missouri City gate fails after a hard rain, the problem is rarely the motor itself. It is usually water getting where it should not be, and that informs how we diagnose and what we replace.
Our Main Missouri City Services
Most calls to our Missouri City line fall into one of three categories: a gate that will not open, a motor that has failed, or a homeowner replacing an old gate entirely. Each has its own page with pricing and details.
Gate Repair in Missouri City
Repair work here covers bent hinges, sagging driveway gates, broken wheels on slide gates, and safety loops that have stopped sensing a vehicle. In Missouri City we also see a fair number of gates knocked out of alignment by wind or by a vehicle clipping the edge. The repair starts with a written diagnosis, not a guess. A technician checks the post alignment, the hinge points, and the operator before quoting the work. If a gate closes unevenly or the opener sounds strained, call before the problem gets worse. See Gate Repair in Missouri City for pricing and what a typical repair includes.
Gate Installation in Missouri City
A new gate on a Missouri City driveway usually means a steel or iron swing gate set on posts driven deep enough for Fort Bend clay. We measure the driveway width, the slope, and the clearance before ordering anything. Many homeowners here are replacing a builder-grade gate from the 1990s with something heavier, and the heavier the gate, the stronger the operator has to be. Installation includes setting the posts, hanging the gate, and matching the opener to the weight. Every job gets a written price before work begins. See Gate Installation in Missouri City to understand what is included and what a new gate typically costs.
Gate Motor Repair in Missouri City
Motor failures in Missouri City fall into predictable patterns: a control board that got wet, a limit switch that stopped registering, or a swing arm that snapped after years of heat cycles. We carry parts for the major brands on our trucks, so a service call often ends the same day. The technician tests the motor, the capacitor, and the wiring before recommending repair over replacement. If the gate does not move and the motor hums, that is usually a capacitor and it is a quick fix. See Gate Motor Repair in Missouri City for motor replacement cost and what brands we work on.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Missouri City
We stock parts locally for DoorKing, Viking, Elite, and Ghost Controls, and our technicians are trained on nine major motor brands including LiftMaster, FAAC, BFT, and Linear. That means a Missouri City call does not turn into a week of waiting on a shipped part. See our brands for the full list.
Pricing for Gate Company in Missouri City, TX
| Service | Typical range in Missouri City |
|---|---|
| Gate repair (minor) | $180 – $340 |
| Gate motor replacement | $600 – $2,200 |
| Full gate installation | $2,500 – $8,000 |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $150 – $300 |
| Loop detector replacement | $200 – $450 |
| Remote/keypad programming | $75 – $150 |
| Operator arm replacement | $250 – $500 |
In Missouri City, price climbs when a gate is oversized or when a motor has to be matched to an older system that is no longer manufactured. The written quote you get before we start is the price you pay; nothing moves at the door.
Neighborhoods We Serve in Missouri City
We run calls across the full Missouri City footprint, from the older subdivisions near Texas Parkway to the newer communities east of Highway 6. Same-day dispatch is usually available for repair calls; installations are scheduled after a free on-site measure.
- Quail Valley
- Lake Olympia
- Riverstone
- Sienna
- Colony Lakes
Service Area – Cities Near Missouri City
Our Missouri City crews also cover nearby communities where gate systems are built the same way and fail the same way. If your home sits just outside Missouri City limits, we likely still have you covered. We serve Stafford, TX, Sugar Land, TX, Fresno, TX, and Bellaire, TX with the same written-price standard.
Serving Missouri City, TX – Our Local Coverage Area
We’re based in the Missouri City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Missouri City
For repair calls, we typically offer same-day dispatch across Missouri City, including evenings and weekends. A live person answers the phone 24 hours a day, so you will never get a voicemail box when your gate is stuck open. Call (469) 530-2485.
Many Missouri City subdivisions have architectural review requirements for driveway gates, especially in communities like Sienna or Riverstone. We can give you the specs your HOA will need, including gate height, material, and setback. Approval is your responsibility, but we will provide the documentation.
Yes. We regularly service individual driveway gates inside master-planned communities here. The technician will check in at the community entrance if required. The written price and the one-year guarantee apply the same as any other call.
If your gate is not working right, call (469) 530-2485. A real person answers, and we will get someone out to take a look.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Missouri City Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.