Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Glendale
A new gate in Glendale costs $2,800 to $9,400 on average, depending on the gate type, operator, and how much ground work your property needs. We’re Carver Gate Repair, and we install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates throughout Glendale, from the flats south of the 134 to the foothill streets above Foothill Boulevard. On hillside lots, the footing and drainage work is usually the biggest part of the job, not the gate itself. Call (469) 530-2485 and we’ll send a background-checked, uniformed technician to your Glendale property, measure the site, and hand you a written price before any work starts.
Why Carver Gate Repair Is Glendale’s Preferred Gate Installation Company
Most gate companies in Glendale treat an installation like hanging a panel and bolting on a motor. We treat it like a small civil project, because on Glendale’s grades, that’s what it actually is. Every job gets footings sized to the slope, conduit run to the operator location, and safety devices tested under load before the crew leaves. That’s The Garrison Standard, and it’s been our operating rule since 2008.
Glendale homeowners tell us the same things: other installers quoted one number over the phone, showed up late, then found reasons to add costs once the hole was open. We don’t do that. Your written price covers the gate, the operator, the footings, the power run, and the safety edges. If something changes on site, we stop and explain it before we spend another dollar. Lonnie Burke runs our operation to that rule, and every technician answers to it.
Response time to Glendale is usually one to three business days for a site visit. We schedule in clear arrival windows, not “sometime between 8 and 5.” Phones are staffed by a live person 24/7. The dispatch and scheduling team works from the brand’s Los Angeles office, and the crews serve Glendale locally, so you’re not waiting on someone from across the county.
Sliding Gate Installation in Glendale
Sliding gate installation in Glendale is the practical choice on hillside driveways where a swing gate would have to fight the grade or carve into a retaining wall. We install slide gates across Glendale regularly, and on lots with a 3 to 5 foot elevation change from street to setback, a slide gate almost always makes more sense than a swing panel that needs room to arc uphill.
What the job includes
A sliding gate in Glendale starts with a concrete footing and a track or cantilever frame rated for the gate’s full open length. The operator bolts to a separate pad, the rack or chain gets tensioned to the panel, and the gate travels on rollers or a V-track that keeps it from dragging at the low end of the driveway.
What it costs here
In Glendale, a sliding gate installation typically runs $4,800 to $9,400, including the gate panel, operator, footings, and safety devices. The spread comes from driveway width, panel material, and whether the slope demands a concrete apron at the bottom of the travel so the gate doesn’t bottom out.
Gate Opener Installation in Glendale
Gate opener installation in Glendale means more than mounting a motor to a post. On longer Glendale driveways, the power run, transformer size, and conduit distance decide whether the gate holds position or reverses mid-travel six months after the install.
Power and conduit
We check the distance from the panel to the operator before we quote. If low-voltage wire gets pulled too far on undersized conductors, the operator starves under load. That’s the most common cause of gates in Glendale that open halfway, stop, then beep and reverse. We size the transformer and the wire to the actual run, not to a shortcut.
Operators we install
Our crew installs LiftMaster, Linear, Ghost Controls, and DoorKing operators, among others. We match the operator to the gate’s weight, duty cycle, and exposure. A gate on a steep Chevy Chase Canyon driveway gets a different operator than a pedestrian gate on a flat lot near downtown Glendale.
Trusted Brands We Service in Glendale
We service and install gate operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Glendale customers, the brands that show up most often on our trucks are LiftMaster, Linear, and DoorKing, because they hold up well on heavy slide gates and long duty cycles. We stock the common parts locally and order specialty components fast, so a Glendale install isn’t delayed waiting on a motor board from across the country. If your existing gate has a failed operator from one of these brands, we can often pair a new operator with the existing gate panel and save you the cost of replacing the whole system. Call (469) 530-2485 for a free estimate and we’ll tell you what’s possible before you spend anything.
Common Gate Installation Problems We See in Glendale Homes
- Slope-driven post failure. On Glendale’s hillside lots, a hinge post set without accounting for the grade change settles or racks within a season. The gate sags even though the panel itself is perfectly straight.
- Underbuilt power runs. Installers pull low-voltage wire to a gate operator without checking the transformer and conduit distance on longer Glendale driveways. The result is a gate that reverses mid-travel or won’t hold its position.
- Safety photocells tripped on tight urban setbacks. In Glendale’s denser pockets near downtown, a photocell aimed across an alley or shared driveway gets tripped by cars, pedestrians, or trash trucks. The gate looks broken when it’s actually doing its job.
- Cantilever gates dragging on grade. Glendale driveways frequently drop enough that a slide gate on a track will scrape at the low end unless a concrete apron or raised track is poured first. We see this repeatedly on replacement installs where the first contractor skipped the base prep.
Pricing for Gate Installation in Glendale, CA
Here’s what a gate installation costs in Glendale right now. A basic single swing gate on flat ground runs $2,800 to $4,200 installed with a standard operator. A sliding gate runs $4,800 to $9,400 because the footing, track, and safety devices add material and labor. A double swing gate typically falls between $3,800 and $6,900. A pedestrian gate with an opener starts around $1,900 and goes to $3,500 depending on access control. The main variables in Glendale are slope, driveway length, and whether we’re tying into existing concrete or pouring new footings. You’ll get a written price before any work starts, and that price is the price. Call (469) 530-2485 for a free measure and estimate.
| Gate Type | Typical Glendale Price Range |
|---|---|
| Single swing gate with operator | $2,800 – $4,200 |
| Double swing gate with operator | $3,800 – $6,900 |
| Sliding gate with operator | $4,800 – $9,400 |
| Pedestrian gate with opener | $1,900 – $3,500 |
Written price before any work starts, free second visit if the installation fails inside the guarantee window, and a full-year written guarantee on every repair. Those are standing terms, not concessions.
We Also Serve Cities Near Glendale
Our crews serve Glendale and the surrounding areas directly. If you’re in Burbank, West Hollywood, Altadena, or Pasadena, the same Garrison Standard applies: background-checked technicians, written prices, and a full-year guarantee. We know the adjacent markets, so a gate installation in those cities gets the same level of care as one in Glendale. For details on our core service, see Gate Installation.
Serving Glendale, CA – Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Glendale
No. A proper gate installation in Glendale takes one to three days, sometimes longer on hillside lots. Concrete footings need to cure before an operator gets mounted and tested. Any company that promises same-day installation on a new gate is cutting a step you’ll pay for later. Call (469) 530-2485 for an honest timeline on your specific property.
If your driveway rises or falls more than about a foot from the street to the gate location, a sliding gate usually saves you money and works better long-term. Swing gates on Glendale hillsides need deep hinge posts, extra clearance to arc uphill, and often a retaining wall modification. A slide gate travels parallel to the grade instead of fighting it. We’ll tell you which one fits your lot during the free estimate.
A proper gate installation in Glendale includes the gate panel, operator, concrete footings sized to the slope, a power run with correctly sized transformer and conduit, safety photocells positioned for your specific driveway geometry, and entrapment reversal testing under load. It does not include hanging a panel on existing posts and bolting a motor on without checking the grade. Ask any installer to list what’s in the quote. If footings and safety devices aren’t on the line items, walk away.
Yes, and we set them to the actual site, not to a template. Automatic gates in residential Glendale are required to stop and reverse when an obstruction is detected, and that means photocells and safety edges placed where they’ll actually function. On Glendale’s dense urban lots, a photocell aimed across a shared driveway will trip on passing cars and look like a broken gate. We aim them where they work correctly. Call (469) 530-2485 to schedule a site walk and get a written price.
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Glendale’s typical slide gates and long driveways, we most often recommend LiftMaster, Linear, and DoorKing for their duty cycle ratings and parts availability. The right brand depends on the gate’s weight, how often it cycles, and your property’s exposure, and we’ll match the operator to the job. Call (469) 530-2485 for a free estimate and operator recommendation.
Get Your Glendale Gate Installation Priced Honestly
If you live in Glendale and want a gate installed by a crew that shows up on time, writes the price down before the work starts, and tests the safety system before they leave, call (469) 530-2485. Lonnie Burke runs Carver Gate Repair to The Garrison Standard, and the 365-Day Done Right Promise means if something isn’t right on an installation, we make it right, in writing, for a full year.
We serve all of Glendale, including the Chevy Chase Canyon area, the Verdugo Woodlands, Montrose, and the neighborhoods around the 134. Estimates are free. The price you get is the price you pay. Call today.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Glendale with The Garrison Standard since 2008.