Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hicksville
A new automatic gate in Hicksville typically costs $4,800 to $11,500 installed, depending on gate type, operator, and ground conditions. Most residential installs take one to three days once materials are on site. Our crews know Hicksville’s older lots, its soil, and its frost-depth requirements. We don’t promise same-day installation because proper work takes time: footings first, then steel, then power, then safety testing. Call (469) 530-2485 for a written, itemized price before you commit to anything.
Why Carver Gate Repair Is Hicksville’s Preferred Gate Installation Company
Hicksville homeowners call us because our process is boringly predictable. The price is written before we touch the ground. The technician who shows up is background-checked and in uniform. The work carries a written one-year guarantee called the 365-Day Done Right Promise. If the install isn’t right, we come back and fix it free inside that window.
Lonnie Burke oversees the crew work in this market, and every job follows The Garrison Standard: write the price, do the work clean, test everything, then walk the homeowner through the result. We answer our own phones, 24/7. No call centers. No voicemail. If you call about a gate in Hicksville at 11 p.m., a live person picks up.
We work on nine gate-motor brands, including Ghost Controls, DoorKing, and Viking. When your existing operator is one of those, we don’t have to guess at the wiring. We know the board, the limits, the arms, and the solenoids. That cuts the install time and the mistakes.
Automatic Gate Installation in Hicksville
Automatic Gate Installation in Hicksville is a groundworks job before it’s a motor job. You’re not just bolting an operator onto an old post. On many Hickville lots, especially those built before the 1980s, the existing hinge posts sit in footings that are too shallow for the torque a new operator puts out. We replace the footing, set a new post, run a dedicated 20-amp circuit, install the operator, mount safety photocells and edges, and then run full UL 325 entrapment reversal testing.
Driveway and Swing Gates
We install single swing, double swing, and heavy driveway gates on steel or ornamental frames. Each gets a post sized for the gate’s weight, a concrete footing below the local frost line, and an operator matched to cycle frequency. A double swing gate in Hicksville adds roughly $1,200 to $1,800 over a single, mostly in the second operator and the alignment labor.
Sliding and Cantilever Gates
Sliding gates suit driveways with slope or tight side clearance. In Hicksville, we see a lot of cantilever installations on lots where a tracked gate would bind in freeze-thaw cycles. A rack-and-pinion setup with a DoorKing or Viking operator is the common spec. Budget $5,500 to $9,000 complete, depending on gate length and whether a concrete guide trench is needed.
Gate Installation Services in Hicksville
Gate Installation Services in Hicksville cover new builds, full replacements, and retrofits where an existing manual gate gets automation. When you call, we schedule a site walk. We measure the opening, check the post footings, look at the electrical panel, and then write a scope of work with material line items. You get that written price before anything is ordered.
Pedestrian and Security Gates
Pedestrian gates with intercoms, keypads, and remote release are common on Hicksville side yards where the house has a long driveway. We run low-voltage wiring in conduit, mount the keypad at the right height, and tie the strike to the house power with battery backup. A full pedestrian gate with card reader and trickle-charged battery starts around $3,200.
Retrofitting an Existing Gate
If you already have a sound gate, we can add an operator, safety loop detector, and remote system. But here’s the Hickville-specific catch: if the existing post footing is shallow or cracked, the retrofit becomes a footing replacement. Anyone who skips that step sells you a gate that sags by spring. We won’t do that.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hicksville
Our installers are factory-familiar with Ghost Controls, DoorKing, and Viking systems, among others. That matters when the operator needs a limit switch adjustment at 7 a.m. or a part that takes three days to order. We stock many common consumables locally for Hicksville jobs: loop detector leads, photocell eyes, capacitors, and receiver boards. It shortens downtime when something isn’t quite right after a storm or a power surge. Call (469) 530-2485 and tell us the brand on the motor plate; we’ll know what you’ve got.
Common Gate Installation Problems We See in Hicksville Homes
- Shallow existing footings. Post footings from the 1960s and 70s often stop at 18 inches. A new operator torques the post loose within a season. We replace the footing to 24 inches or deeper, below the frost line.
- Undersized wiring. Older Hicksville homes often share a gate circuit with garage lights or an outdoor receptacle, causing voltage drop that makes the operator intermittently dead. A dedicated 20-amp circuit is standard on our installs.
- Missing or misaligned safety devices. A gate without proper photocells and safety edges fails UL 325 testing. We saw this near Levittown Parkway recently: the operator worked fine, but the closing edge had zero stopping force protection. That’s not safe enough for a driveway a child could walk across.
- Wrong operator for the gate’s weight. A light-duty kit on a heavy ornamental driveway gate burns out boards and gears in months, not years. We size the operator to the gate’s measured weight and cycle rate.
Pricing for Gate Installation in Hicksville, NY
Here are honest ranges for Hickville’s market. A basic pedestrian gate install runs $2,800 to $4,500. A single swing driveway gate with automation lands at $4,800 to $7,000. Double swing gates go $6,000 to $9,800. Sliding or cantilever gates run $5,500 to $9,000. A full security gate system with intercom, keypad, and two operators can reach $11,500. What moves the price: footing replacement, trenching for power, gate weight, and brand of operator. We write the final number down before work starts. That number doesn’t move at the door. Call (469) 530-2485 for a free, no-pressure estimate at your Hicksville property.
We Also Serve Cities Near Hicksville
Our crews regularly run installations in Hicksville and the surrounding towns: Levittown, Hempstead, Freeport, and Long Beach. If you’re just outside the town line, call us. We cover most of central Nassau with the same written-price standard and the same Gate Installation guarantee.
Serving Hicksville, NY – Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Hicksville
Yes, if the post and footing pass inspection. In Hicksville, many older hinge posts are set in shallow concrete that no longer reaches below the frost line, and we will not bolt a new operator onto a moving post. If yours is unsound, we recommend and price a footing replacement as part of the job. Call (469) 530-2485 for an honest assessment.
Most full installations take one to three days on site. That covers demolition of the old gate if present, footing excavation and pour, post setting, gate fabrication or assembly, operator mounting, electrical runs, and UL 325 reversal testing. Concrete cure time is part of the schedule; no installer does this properly in one visit. Call us at (469) 530-2485 to get a realistic timeline for your property.
In most cases, yes. Automatic gates that run on line voltage and include entrapment protection typically require permits in Nassau County. We handle the paperwork and pull permits as part of the scope, and we write that line item into your quote. We don’t leave you to figure out the Town of Oyster Bay requirements on your own. Call (469) 530-2485 and we’ll walk you through what applies to your lot.
We install and service nine brands as a company standard, with Ghost Controls, DoorKing, and Viking being the most common units on Hicksville driveways. We carry parts for these locally where possible and have the dealer-level programming tools to set limits, speeds, and force profiles correctly the first time. Call (469) 530-2485 with the brand currently on your gate and we’ll confirm what’s available.
Because it’s required under UL 325, the federal safety standard for automatic gates. Photocells stop the gate when a person or vehicle breaks the beam, and the reversal test proves the gate stops and reverses when it hits resistance. We install both a non-monitored photo eye and a monitored safety edge on every automated gate in Hicksville, then test the whole thing in front of you. Call (469) 530-2485 if you inherited a gate that never had this done.
Need a written price for gate installation at your Hickville home? Call (469) 530-2485. Lonnie Burke and the Carver Gate Repair team will set a site walk, write the scope, and give you the number before any work begins.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Hicksville, NY.