Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hicksville
Gate repair in Hicksville usually means one of two things: a gate that won’t open, or a gate that won’t stay aligned. Most calls we run across Nassau County take between an hour and a half and three hours on site, and the price is written down and agreed before any work starts. We service Hicksville from the Levittown border up to the LIRR tracks and out toward South Oyster Bay Road, and our crew knows the housing stock here: post-war capes, split-levels, and older lots where concrete post footings are now fifty or sixty years old. When a gate stops working, it’s rarely the panel itself. It’s the post, the hinge, or the operator. Call (469) 530-2485 and a live person picks up, day or night.
Why Carver Gate Repair Is Hicksville’s Preferred Gate Repair Company
Hicksville homeowners don’t need another contractor who shows up late, gives a verbal number, and revises it after the gate is in pieces. Carver Gate Repair was set up under The Garrison Standard in 2008, and that standard runs on three rules: a written price before any work begins, technicians who pass a background check and wear a uniform, and a written guarantee on every repair good for a full year. Lonnie Burke runs our crews to that standard, and it applies the same on a small hinge repair off Newbridge Road as it does on a full automatic gate install near Cantiague Park.
We work as part of the Gate Repair team at Garrison Partners, and every Hicksville job is dispatched through our New York City office, with technicians who know this part of Nassau County well. That means when we arrive in Hicksville, we already know what we’re likely to find: tight driveways, older posts, and gate operators that were undersized for the panel they’re running. The written guarantee covers a full year from the date of service. If a repair fails inside that window, the second visit is free. No charge, no argument, and the number stays what it was on the first visit.
Gate Welding in Hicksville
Gate welding in Hicksville comes up most often on older steel and wrought-iron gates where the panel has pulled away from the hinge or a crack has opened at a stress point. The panel gets called ‘broken,’ but the real issue is usually a hinge weld that fractured after years of cycling, or a sagging post that put the gate under uneven load until something finally gave. Our welders clean the area back to bare metal, repair the joint, and reinforce it, rather than laying a surface bead over rust and hoping it holds. On a typical Hicksville property, weld repair on a hinge or a cracked stile runs $180 to $450, depending on whether the gate needs to come off its hinges and how much prep the metal requires.
When a Weld Is Not Enough
We will tell a homeowner straight: if the post itself is moving or the footing is cracked, welding the panel won’t stop the problem. The gate will just tear again somewhere else. In those cases the fix is a new concrete base for the post, then the panel weld. That runs closer to $600 to $1,100 in Hicksville, and the written quote reflects it before we cut anything.
Welding on Driveway Gates vs. Pedestrian Gates
Driveway gates take more load, so we weld them differently than pedestrian gates. We also check the hinge pins and the post alignment while we’re there, because a good weld on a misaligned gate still binds. Most weld repairs in Hicksville are done in one visit, with the gate left to cool properly before we cycle it.
Commercial Gate Repair in Hicksville
Commercial gate repair in Hicksville centers on properties along South Oyster Bay Road, the industrial blocks near the LIRR maintenance yard, and multi-tenant lots where an automatic gate runs all day. The most common call we get is a keypad entry or safety-edge failure that has the gate stuck open or closed, and the second most common is a loop detector that has drifted out of adjustment and now false-triggers every time a truck passes the apron. These are not calls to put off: a gate stuck open after hours is an open invitation, and a gate stuck closed blocks deliveries and employees. Commercial callout and diagnostic work in Hicksville typically runs $150 to $320, with repairs such as a replacement loop detector or keypad running $280 to $650 depending on the system and access.
Loop Detector and Safety Edge Work
Narrow commercial aprons in Hicksville put the loop detector close to the sidewalk and the street, which makes false triggers more common. We set the detector’s sensitivity and placement to the actual traffic pattern, then test the gate’s reversal under load. A gate that won’t reverse when it meets resistance is not safe to leave in service, and we say so plainly.
Operators That Run All Day
Commercial operators in Hicksville run more cycles in a month than a residential gate runs in a year. That kind of duty cycle exposes weak limit switches, worn drive belts, and overheating motors quickly. We stock parts for FAAC, BFT, and Linear operators, and on most commercial jobs we can complete the repair the same visit rather than ordering parts and leaving the gate down.
Trusted Brands We Service in Hicksville
Our technicians work on nine gate-motor brands, and in Hicksville we routinely service FAAC, BFT, Linear, and Viking equipment, along with LiftMaster and DoorKing systems on commercial properties. Because we focus only on gates and operators, we keep the right parts on our trucks for the systems we see most often around Levittown, Hempstead, and Hicksville. That means fewer second trips and fewer days where a driveway gate is propped open with a strap. If a gate operator in Hicksville has failed, we identify the make and model, confirm the failure point, and give the written price before we start.
Common Gate Repair Problems We See in Hicksville Homes
- Sagging swing gates from post corrosion. On older lots near the LIRR station and around the streetcar-era streets, the hinge post is often set in a concrete footing that has cracked over decades of freeze-thaw cycles. The panel looks like the problem; the post is actually moving.
- Gate operator failures after storms. When a nor’easter knocks out the low-voltage line to the operator or the safety photocell, the gate stops responding or throws a code. We trace the wiring, find the break, and restore the low-voltage circuit rather than blindly swapping the operator.
- Rack and pinion wear on slide gates. A slide gate that has run on an unlevel track, or with an operator that was struggling, will strip teeth off the rack. The gate grinds, jerks, and eventually binds. We replace the worn section and re-level the track so it doesn’t happen again.
- Photocell and keypad failures on automatic gates. Narrow Hicksville driveways put the photocell beam across a busy apron where it gets knocked or misaligned. When the beam is out, the gate won’t close. Keypads that fail in the rain are also a common call, especially on commercial lots.
Pricing for Gate Repair in Hicksville, NY
Here are honest ranges for the work we do in Hicksville. A hinge or alignment repair on a residential swing gate runs $180 to $380. A gate operator replacement, including the new operator and labor, runs $850 to $2,400 depending on the make and the arm type. A new rack and pinion section runs $340 to $700. Weld repair on a cracked panel or hinge runs $180 to $450, and a full post reset with new concrete runs $600 to $1,100. Every one of those prices is written down and agreed before we begin, so the number does not move at the door. For a free estimate in Hicksville, call (469) 530-2485.
We Also Serve Cities Near Hicksville
Our technicians run calls across central Nassau County. In addition to Hicksville, we serve Levittown, Hempstead, Freeport, and Long Beach. If your gate is down and you’re in one of those towns, the same written pricing and one-year guarantee applies.
Serving Hicksville, NY – Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hicksville
Straightening the panel only works if the post is still solid. In Hicksville, we usually find that the sag is caused by a hinge post that has started to lean or a footing that has cracked. If we straighten the panel without fixing the post, the gate sags again within a year. We check the post first, then decide. If the post is sound, sag correction alone runs $180 to $380. If the footing needs to be cut out and repoured, plan on $600 to $1,100. Call (469) 530-2485 and we’ll tell you which one you have.
Yes. Our technicians are trained on all nine of those brands, and we stock parts locally for FAAC, BFT, Linear, and Viking because those are the systems we see most often in Hicksville. We match the operator to the gate’s weight, width, and cycle count, then wire the safety photocell and test the reversal. A residential operator replacement in Hicksville runs $850 to $2,400 complete.
A proper automatic gate installation includes more than bolting on an operator. It includes the concrete pad or post footing, the low-voltage power run, the safety photocells, the loop detector or edge sensors, and full reversal testing under load. On Hicksville’s tight, tree-lined lots, it also means positioning the operator and photocell to avoid tree-root interference in the post footing. A full swing or slide gate install in Hicksville typically runs $3,800 to $9,500, measured and scheduled, never rushed. Call for a free measure and a written price.
Usually. A grinding noise on a slide gate in Hicksville is most often worn or stripped teeth on the rack, caused by years of running on a track that has settled slightly out of level. We inspect the rack, the pinion gear, and the track level, then replace the worn section rather than greasing over the problem. Rack and pinion section replacement runs $340 to $700.
A working photocell stops the gate and reverses it when the beam is broken, and a working reversal circuit stops the gate when it meets physical resistance. On a narrow Hicksville driveway, the photocell beam often gets knocked out of alignment, at which point the gate refuses to close. We test both functions on every visit. If the gate does not reverse under resistance, we will not leave it in service, because that is a serious safety risk on a driveway where kids and delivery trucks share the same apron. Call (469) 530-2485 and we’ll check it.
Written by Lonnie Burke, owner of Carver Gate Repair, operating in Hicksville and central Nassau County to The Garrison Standard.