Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hempstead
Gate repair in Hempstead usually comes down to one of three things: a hinge post that has shifted in an undersized footing, an operator that lost its entrapment protection, or a slide-gate track that settled out of level. We quote a written price before any work starts, and that number does not move at the door. If you live near Hofstra, off Front Street, or up around the Turnpike, call (469) 530-2485 and a live person answers, day or night. Our Gate Repair team covers every corner of Hempstead, and we know exactly what these older properties ask of a gate system.
Why Carver Gate Repair Is Hempstead’s Preferred Gate Repair Company
Homeowners here have dealt with enough no-shows and moving prices. Carver runs on The Garrison Standard: background-checked, uniformed technicians, a written price before the first tool comes off the truck, and a 365-Day Done Right Promise on every repair, in writing. Hempstead customers call us back because the guarantee actually means something. If a repair fails inside the year, we return and fix it at no charge. No argument, no second invoice.
Lonnie Burke runs our gate work, and he is particular about two things: clean sites and honest timelines. We tell Hempstead customers when a repair can be finished same-day and when it cannot, especially for new installs that need groundworks and set time. Our local reputation is built on that directness. Crews arrive in uniform, identify themselves at the gate, and leave the area swept and tidy.
Metal Gate Repair in Hempstead
Metal Gate Repair in Hempstead often means more than straightening a bent panel. Steel and aluminum gates on pre-1980s properties here are typically hung on posts set in shallow or undersized concrete footings. We see the panel blamed for what is really a post failure. Typical metal gate repair work in Hempstead runs $225 to $520 depending on whether we are cutting out and re-setting a post, welding a cracked frame joint, or simply re-hanging and aligning an otherwise sound gate.
Hinge and Post Work
Posts rot or shift, and the gate binds at the latch. We pull the post, re-pour the footing to carry the load, and reset the hinges level before touching the panel. A proper footing means the gate stays put through freeze-thaw cycles that push shallow concrete around.
Weld and Rust Repair
Steel frames corrode at the bottom rail and hinge plates on Long Island, especially where salt air drifts in from the South Shore. We cut out the bad section, weld in new stock, and re-coat so the repair outlasts the original metal around it.
Wood Gate Repair in Hempstead
Wood Gate Repair in Hempstead is rarely just replacing a rotted board. Most wood gates lean or sag when the hinge post moves, usually because the footing was poured for a fence post back when the house was built, not for a gate carrying automation weight. A typical repair here runs $180 to $450, covering everything from re-hanging and adjusting a cedar gate to full post replacement with a properly sized footing.
Sag Correction
We level the gate leaf, replace tired hinges, and if the post is still solid, add an anti-sag kit sized to the panel weight. If the post has shifted, the fix starts below grade. That is the part most generalist contractors skip.
Latch and Lock Repair
Gate locks fail when alignment drifts, and forcing them only bends the striker. We align the gate, then service or replace the latch so it closes without lifting or slamming. On automated gates, we check the lock release against the operator so the motor is not fighting a deadbolt.
Trusted Brands We Service in Hempstead
Our technicians carry parts and control boards for the operators we see most on Hempstead driveways: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On older Hempstead properties we frequently run into Viking and DoorKing swing operators, and we keep the common boards and limit switches for those units stocked on our trucks. If we have the part, the repair moves faster. If we do not, we tell you the exact lead time before you agree to anything.
Common Gate Repair Problems We See in Hempstead Homes
- Sagging swing gates where the hinge post has rotted or shifted. Most Hempstead houses were built before 1980, and the posts were set in footings meant for a fence, not a 300-pound gate with an operator. The panel gets fixed, the post keeps moving, and the gate sags again inside a season.
- Operators running without entrapment protection. We regularly find Hempstead gates with a dead safety photocell or no edge sensor at all, and no reversal test done after the last service. That is a safety fail and often a code violation.
- Rack and pinion slide drives binding on settled tracks. Older Hempstead slide gates sit on tracks poured decades ago. When the footing settles, the drive binds and the operator trips out every cycle, usually in the morning after overnight temperature drop.
- Failed limit switches on older swing operators. Viking and older LiftMaster units wear out limit switches, so the gate over-travels and slams the post or fails to close. We replace the switch, set the stops, and re-test the reversal under load.
Pricing for Gate Repair in Hempstead, NY
Most gate repairs in Hempstead land between $180 and $520. A simple hinge re-alignment or latch replacement starts around $180 to $240. Post footing replacement with re-hanging runs $350 to $520 for a typical single swing gate. Slide gate track re-leveling runs $300 to $450. Operator limit switch or safety photocell replacement typically runs $220 to $380. A full operator replacement, parts included, usually falls between $750 and $1,400 depending on brand and gate weight. Every job gets a written price before work starts, and every repair carries our one-year written guarantee. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Hempstead
Beyond Hempstead, our crews cover Freeport, Levittown, Hicksville, and Long Beach. If your property sits near the Hempstead border or you manage a gate in a neighboring village, the same written-price policy and one-year guarantee apply. See our full Gate Repair in Hempstead coverage for details on scheduling and response windows across the area.
Serving Hempstead, NY – Our Local Coverage Area
We’re based in the Hempstead area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hempstead
Because the hinge post, not the panel, is almost always the real failure point in Hempstead. Most homes here were built before 1980, and gate posts were set in shallow footings sized for a fence, never meant to carry a heavy gate or an operator. Fixing the post properly means pulling it, re-pouring a footing with enough mass, and re-hanging the gate level. That usually runs $350 to $520. Call (469) 530-2485 and we will tell you if your post is the problem before you spend another dollar on the panel.
Yes. Automatic gate operators in New York must have working entrapment protection: a functioning safety photocell or edge sensor, and the operator must reverse when tested under load. We test reversal on every service call, not just installs. If your operator trips or failed the last reversal test, call (469) 530-2485 and we will get it corrected and documented.
No, and we will not promise a same-day install. A proper gate installation in Hempstead includes groundworks, post footings with set time, power run, operator mounting, safety edges, and reversal testing. That is measured in days, not hours. We will take a free measure, give you a written price, and schedule the work so it is done once and done right. Call (469) 530-2485 to set up the measure.
Our Hempstead technicians are trained on nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On older Hempstead properties, Viking and DoorKing swing operators show up most often, and we stock the common boards and limit switches for those on our trucks. If your brand is not listed, call (469) 530-2485 and we will tell you straight whether we can service it.
Most repairs in Hempstead can be completed same-day or next-day, depending on the part. Hinge post replacement or track re-leveling is usually a single visit of four to six hours. A new install with groundworks and footing set time typically runs three to five days from start to final reversal testing. We tell you the timeline before you agree to the work. Call (469) 530-2485 and give us the fault you are seeing; we will give you a realistic window, not a promise we cannot keep.
If your gate is sagging, binding, or the operator will not reverse, call (469) 530-2485. A live person answers 24/7. We will dispatch a background-checked, uniformed technician to Hempstead with a written price before any work begins, and a one-year guarantee after it is done.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Hempstead under The Garrison Standard.