Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
A new driveway gate in Keller typically runs between $2,800 and $7,500 depending on the gate style, automation, and how far we need to run power. Most installations take one to three days from footing prep to final safety testing. We schedule every Keller job with a written price agreed before any work starts, and we show up when we say we will.
Keller is not one kind of neighborhood. You’ve got tight HOA subdivisions off Rufe Snow Drive and more open acreage properties out toward Keller-Hicks Road. That mix changes how we plan almost every install. It affects post depth, whether we trench for power or size a solar array, and how we handle setback rules. We know the ground out here. Call (469) 530-2485 and we’ll put together a real plan for your property, not a generic quote.
Why Carver Gate Repair Is Keller’s Preferred Gate Installation Company
Homeowners in Keller call us after they’ve already dealt with a general contractor who treated the gate like a side project. The work is what we do with our full attention. Every Keller installation gets a written price before the first hole is dug. That price covers the complete job: gate fabrication or supply, posts and footings, operator mounting, wiring or solar, safety sensors, and final UL 325 testing. The number does not move at the door.
Our crews arrive background-checked and in uniform. You know exactly who is coming through your gate because you see the Carver name on the truck and the technician. We answer the phone with a live person, 24 hours a day, including weekends and holidays. No voicemail box, no callback queue. That matters when a gate fails on a Sunday evening and your driveway is half open.
Lonnie Burke leads the team that dispatches to Keller, and every install is done to The Garrison Standard. That means written pricing, clean work sites, and a full-year written guarantee on every repair. For installation work, the same standard applies: proper footings, correct operator alignment, and safety testing we can show you before we leave. We don’t consider a job done until the gate actually works right, from open to close, under load.
Gate Installation Services in Keller
Gate Installation Services in Keller start with a site plan, not a catalog. We need to see the driveway layout, measure the opening, check for slope, locate existing utilities, and determine whether grid power is available or if we’re designing around solar. Then we spec the gate and operator that actually fit the property.
Driveway And Pedestrian Gates
Driveway gates in Keller run the full range from ornamental steel to aluminum ranch-style. Pedestrian gates are usually smaller, simpler jobs, but they still need proper post placement and hardware if they’re going to hold up. A typical pedestrian gate installation in Keller runs $900 to $2,400.
Swing, Slide, And Double Gate Systems
Swing gates work well on flatter Keller lots with enough driveway setback for the arc. Slide gates suit properties where the driveway has a slope or where the HOA prohibits a swinging leaf over the sidewalk. Double gates often mean two operators or a master-slave setup, which adds equipment and labor. These systems run $3,500 to $9,000 installed in Keller depending on span and automation.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Keller
Electric Gate Installation in Keller means planning the power before the gate ever arrives. We calculate the operator’s draw, the distance from your panel, and whether trenching is feasible or whether a solar kit with battery backup is the right call. Keller’s mix of newer subdivisions and rural properties off Keller-Hicks Road makes this the single most important part of the estimate.
Operator Mounting And Wiring
We mount operators from FAAC, BFT, Linear, and Viking, among others, and we match the operator to the gate’s weight, cycle rate, and exposure. Wiring has to be run in conduit, weather-sealed, and protected from soil movement. For Keller homes on shifting clay-heavy soil, we over-dig and set posts deeper than code minimums because the ground here does settle.
Solar-Powered Gate Systems
For Keller properties where running a dedicated circuit is impractical or intrusive, a solar-powered opener with a deep-cycle battery is often the better answer. These systems work fine on swing gates and smaller slide gates. We size the panel and battery to the operator’s daily cycles, and we test the system through a full open-close sequence before we leave.
Trusted Brands We Service in Keller
We work on nine gate-motor brands, and for Keller installs we typically see FAAC, BFT, Linear, and Viking systems already on existing gates or spec’d for new ones. Our technicians train on all of them, so we don’t show up guessing at the wiring diagram. We also keep common parts and boards accessible for Keller-area service calls, which shortens turnaround when a motor needs a swap. If you have an existing operator and just need the gate replaced, we can match your current brand so the remotes and keypad keep working without a full rewire.
Common Gate Installation Problems We See in Keller Homes
We see the same failure patterns repeat across Keller properties, and almost all of them come down to what wasn’t done during the original install.
- Settling hinge posts on new-build lots. Keller’s newer subdivisions are built on recently graded, shifting soil. A hinge post set in a shallow footing settles, the gate sags, and no amount of panel adjustment fixes it because the post itself has to be corrected.
- Tight setbacks forcing entrapment failures. Many Keller HOAs require a swing gate that arcs over the driveway or walkway. Without a proper loop detector and a safety photocell, that gate fails UL 325 entrapment testing. We test every install against that standard before we call it done.
- No nearby power on rural properties. Properties off Keller-Hicks Road and the quieter roads around town frequently don’t have a panel anywhere near the gate. Installs that assume grid power stall out. We plan for solar or a dedicated trench from the start.
- Misaligned rack and pinion drives on slide gates. A long slide gate with a cheap operator mounted slightly out of alignment will drag and chew through the drive within a season. Correct alignment and a proper post footing fix the root cause instead of patching the symptom.
Pricing for Gate Installation in Keller, TX
A single swing gate with a basic operator in Keller typically runs $2,800 to $5,500. A slide gate with a rack and pinion drive runs $3,800 to $7,500. Double driveway gates with two operators can reach $9,000 or more depending on width and automation. Pedestrian gates are the light end, usually $900 to $2,400. Power work, concrete pad or footing repair, and longer trench runs add to the total. Solar packages add $1,200 to $3,500 depending on panel and battery size.
Every Keller installation gets a written price before work starts. The estimate is free. The price is the price. Call (469) 530-2485 and we’ll walk the property and hand you a number you can hold us to.
We Also Serve Cities Near Keller
We serve Keller and the surrounding North Texas communities. That includes Haslet, North Richland Hills, Roanoke, and Southlake. If you’re in any of these areas and need a gate quote, the same written-price standard applies. This is our Gate Installation work across the whole region, and for Keller specifically we’re just a call away at (469) 530-2485.
Serving Keller, TX – Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Keller
Do you offer same-day gate installation in Keller?
No. Gate installation is not a same-day job, and anyone promising same-day install on a new driveway gate is cutting corners on the footing, the wiring, or the safety testing. What we do offer is a fast response to measure the site and deliver a written price, usually within one to two business days for Keller properties. Most installations are completed within one to three working days once materials and the operator arrive. Call (469) 530-2485 to get on the schedule.
Why does my new gate sag even though the panel looks fine?
In Keller, a sagging gate that still looks structurally fine usually means the hinge post footing was set too shallow or into shifting soil. The clay-heavy ground in newer subdivisions settles, and the post moves with it. The panel didn’t fail. The foundation did. The fix is to reset the post with a deeper, properly prepared footing, then re-hang and re-align the gate. We correct the post first, because adjusting the panel alone just repeats the same failure in a few months.
Does my Keller gate need photo-eyes or edge sensors?
Yes. Any automated gate installed in Keller has to pass UL 325 entrapment protection standards, which means photo-eyes, edge sensors, or a combination of both depending on the gate type and the site’s specific risks. This is not an optional add-on. It’s a safety requirement designed to stop the gate if a person, vehicle, or animal is in the path. We test every installation against UL 325 before we leave. Call (469) 530-2485 if you want to know which protection setup applies to your gate.
What if my Keller property doesn’t have power near the gate?
Then we plan for solar or a dedicated trench. Keller properties off Keller-Hicks Road and the rural corridors often have no panel within economical reach of the gate. A solar opener with battery backup handles these sites well when sized correctly to the operator’s daily cycles. If grid power is accessible, we trench the run properly in conduit. Either way, the power plan is part of the written price you get before work starts.
What brands do you install and service for Keller gates?
We install and service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Most Keller gates we see use FAAC, BFT, Linear, or Viking equipment. If you have an existing operator and want to keep the same remotes and keypad, we match the brand so the access system stays intact. The brand you already have is the brand we know how to work on.
Get a Written Price for Gate Installation in Keller
If you’re in Keller and you’re tired of contractors who don’t show up, quote one number and bill another after the work is done, or leave a gate that works for a month and sags again, call us. The phone rings to a live person around the clock. We’ll put a real plan on paper, including the power run and the safety testing, and the price won’t move at the door. Call (469) 530-2485 for a free estimate on gate installation in Keller.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Keller and the surrounding North Texas area.